Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

grokit

well-worn member
Good Discovery , that is what you'd need to get started but i highly recommend the Lollicap carb cap and one of the bases to sit your hot nail on when taking flower hits or double deckers. You for sure would also need the nut .
That looks like a very nice cap;
@NewVape710 how does your lollypop cap fit on the d-nail sic dish?
:shrug:
I already have d-nail's cap, it sits perfectly on their dish.


:sherlock:
 
Last edited:

Zow237

Well-Known Member
The addition of the 20mm coil center post was suggested by members on this forum. I feel it was mostly because of those members already own 20mm coils. I personally feel that the 20mm coil looks better on the flowerpot. It will most likely require another min to heat up over the 16mm center post because of the increased material mass. This increased material mass will also offer more heat retention. Improved heat retention should result in less cool down during the draw. Additionally 95% of the growers / dab tenders at the recent cannabis cup were all using 20mm coils on their dab rigs. Part of our sales and marketing initiatives is to make the flowerpot available to growers when vending their samples. Currently most exhibitors use a bong and combustion when presenting their wonderful flowers (a true crime). I'm sure there's much more intel here than you were hoping for.

Thanks so much! This was more than enough :) def thinking about getting the 20mm now :)
 

disGRUNTled

Well-Known Member
Bubba Kush & Grind Mode Cyphers.
BW4HWV9.jpg

YZBGHTb.jpg

 

grokit

well-worn member
I'm in. This thing's too good to wait for. It's going to change my vaping life :tup:

I have a soldering stand somewhere plus a sub stand that I know exactly where it is. So I put the aluminum one in my wishlist along with the carb cap and an henail, which looks to be a great alternative between the overpriced boost and going straight to china for whatever if one is looking for a portable dab rig. Which I'm really not, my next move is to learn more about dealing with mods and atomizers, and that's enough learning for now. Thanks for the coupon code @NewVape710; I ordered the parts separately, hope I didn't screw myself out of a package discount to come lol. I sent a note afterword that I forgot to add screens.

I have a feeling that I will be unloading a lot of vaping stuff later this year, now that my collection is getting to be a bit 'too complete' it's going to be time to streamline and downsize but I like it all gonna be hard!

:sherlock:
 

Alan Partridge

Smell my cheese
Y
See my problem is I have nothing...
Im learning as quick as possible....
I have to buy alot...

Is a hex nail worth it..
Should I just buy everything from newvape???
So many options...
Not enough knowledge....

You can't get the coils or controller - they are 110v. Sweet cigs supply New Vape, you can get 240v versions from them.

For the rest, have a look at the FAQ on the NV site, it tells you what you need.
 

Doktor Dub

Well-Known Member
See my problem is I have nothing...
Im learning as quick as possible....
I have to buy alot...

Is a hex nail worth it..
Should I just buy everything from newvape???
So many options...
Not enough knowledge....

i would be very glad to be able to get it all from NewVape - seems like a great company and if something goes wrong, just one place to contact.
As NewVape said european customers should buy the controller and coil elsewhere, this is exactly what holds me back a bit....

i am sure the HexNail is great, but this is not something you need, it s something you want and even then, a cheap backup can not be wrong...

just my :2c:

edit: @Alan Partridge had probably the better answer...
 

ataxian

PALE BLUE DOT
See my problem is I have nothing...
Im learning as quick as possible....
I have to buy alot...

Is a hex nail worth it..
Should I just buy everything from newvape???
So many options...
Not enough knowledge....
Someone PM'D me for a kit complete for $270.

I thought it seemed very expensive?
My EVO is coming back so I'm OK with COLAS.
My MODS work great for CONCENTRATES.

Maybe latter when the price reduces.
My next purchase will be a FLOWER POT when I can setup for a lower $.

Our houses cost more in CALIFORNIA without the GOLD we once had? (we have sunshine at least)

The beaches are not as nice as HAWAII but not bad? (at least their close)

Flower POT set-up $270.00 is out of reach?
 

MinnBobber

Well-Known Member
Someone PM'D me for a kit complete for $270.

I thought it seemed very expensive?
.....................................................................................
@ataxian , it's only money.
Besides, can't you get your wife to put in some overtime if you ask her nicely and explain that it's
for a good cause, another must have vape ;)
She'll certainly see the merit, right ?????
 

Justpassedu

Well-Known Member
Someone PM'D me for a kit complete for $270.

I thought it seemed very expensive?
My EVO is coming back so I'm OK with COLAS.
My MODS work great for CONCENTRATES.

Maybe latter when the price reduces.
My next purchase will be a FLOWER POT when I can setup for a lower $.

Our houses cost more in CALIFORNIA without the GOLD we once had? (we have sunshine at least)

The beaches are not as nice as HAWAII but not bad? (at least their close)

Flower POT set-up $270.00 is out of reach?
Pick up a new Enail , cost would be $80-$100 with a coil , than all you need is a head, nut and bowl to get started $95 - 10% off = 85.50 , Total to get started = $185.50 + shipping . You can add other things you'd like as extras as money comes in.
 

ataxian

PALE BLUE DOT
@ataxian
The cost is very different if you don't already have a controller/coil/dnail sic dish/cap on hand.

Not to mention the 'hot parking' receptacle :tup:

:sherlock:
I'm confused now?

I was going to buy a separate power source then the FLOWER POT system.

$270 is lot more than I planned to spend?
My EVO will be for COLAS (FLOWER TAIL'S)
My Mods of 100 watt and 200 watts and my many tank's for CONCENTRATES.

However the FLOWER POT was a nice set-up for my back yard where I spend most of my time reading. Maybe next year I get one?

For now I have what I need.
What I want is a different thing.
 

Joaon

Well-Known Member
:ninja:
Ok I'm down, I ordered the FlowerPot ! Couldn't resist to the strong VAS,
so much talks and debates about this vape..
I had to know, I had to discover from my own :cool::lol:
Can't wait to try it out, it will be a nice companion for my Herborizer XL and Ti :D

I got my EU 220v Enail here -> Link,
and from Flowerpot :
Titanium Dish Nut&Head (Would Sic Dish be breakable? Was not sure, so..)
14mm male body with handle
LolliCap
and the tray base & lid

Is it all good? Am I missing something?
A big ass bong for smoothing incredible hits? :evil:
 
Last edited:

grokit

well-worn member
I'm confused now?

I was going to buy a separate power source then the FLOWER POT system.

$270 is lot more than I planned to spend?
My EVO will be for COLAS (FLOWER TAIL'S)
My Mods of 100 watt and 200 watts and my many tank's for CONCENTRATES.

However the FLOWER POT was a nice set-up for my back yard where I spend most of my time reading. Maybe next year I get one?

For now I have what I need.
What I want is a different thing.
Do you have an enail setup already?
That's the power source you need to use this :tup:

:sherlock:
 

Likes2vape

Well-Known Member
Someone PM'D me for a kit complete for $270.

I thought it seemed very expensive?
My EVO is coming back so I'm OK with COLAS.
My MODS work great for CONCENTRATES.

Maybe latter when the price reduces.
My next purchase will be a FLOWER POT when I can setup for a lower $.

Our houses cost more in CALIFORNIA without the GOLD we once had? (we have sunshine at least)

The beaches are not as nice as HAWAII but not bad? (at least their close)

Flower POT set-up $270.00 is out of reach?
If you already have an enail with a 16mm or 20mm coil all you need is the flower pot base, flower pot top, and a carb cap. The base holder is nice but a set of helping hands works just as good. (soldering tool stand to hold the head unit when it is heating up or you empty the bowl).

Enail $110 (if you don't already have one)
Flower pot base with handle $40
Flower pot top with sic dish $65
Lollipop carb cap (if you don't already have one) $25
Helping hands $15

If you already have an enail and carb cap it is really cheap to get going.

If you think the EVO is civilized than you will think the Flower Pot is Shangria La.
 
Last edited:

dnice2532

Active Member
How does the flowerpot compare with 710 life enail? After getting the cloud evo.......my firefly 2(disappointed) cfx(average) titanic 2(vape too hot) deja vu (puri 5 gimmick) are useless as far as flavor and potency. I'm very interested in the flowerpot and wonder how it compares to the evo??
 

VisiblyVaped

Well-Known Member
It's been done.
I ordered the Sic dish with the 20mm body/head/nut (its a dollar more than buying the 16mm one altogether and I prefer 20mm), and the lollicap of course. With some extra screens I can shape for micro dosing.
I ordered my extra enail from Auberins instead, just because I already have a generic version (vapecode) of what Nv offers.

I believe I should be all set there for double decker hits tomorrow, correct?
 

ataxian

PALE BLUE DOT
Jet Fuel , Marlon Craft and an Avery Brewing Apricot Sour.
ong1AzK.jpg

UR2RAb7.jpg

UkG9th7.jpg

Your a rich guy!
I'm a low-income sack.

My EVO's not bad?
My MOD work amazing?

Most of the grower's I know don't use a vaporizer? (small 5 acre grows)
They smoke joint's.
Too them I'm weird because I vape?

I only do 2 grams a week of rosin so maybe I'm a light-weight compared to most?
3 - 4 grams of Flower/WEEKLY = low usage!


CIVILIZED = not me?
MEDICATED = that is all I know?

COLAS = GRAND RESERVE

FLOWER POT I can only dream to use or own one one day?
See you later!
 
Last edited:
Top Bottom