Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Baron23
Well-Known Member
I believe the differences are merely external cosmetics....just the aesthetics of it. Functionally identical.
Zow237
Well-Known Member
I have to disagree with you if you haven't used the GS, no restriction whatsoever. But if that's the only thing I'm fine with that and just upping the temps without a cap. Great airflow that way. I get way bigger and better extracted hits from my gs over my fp. It's like a pee shooter compared to the Gs imo.(to each their own) But that's besides the point haha. Hard to think I can get even better extraction or hits than the GsYes, the OG has more resistance but is still a big hitter.
Where the SH is an extraction beast that provides the most resistance free draws of any vape on the planet. I think the SH is the pinnacle of vaporization by a large margin. There is nothing else like it.
Zow237
Well-Known Member
I don't see how the mass of something so small could beat the mass of the Gs. I guess I'll have to find out sooner or later. I'll have to do a video of them side by side. Still sucks that I have to get a whole new coil to get the Sh
ParanoidAndroid998
Well-Known Member
What is your bong sitting on in this picture?!...Look at all the restriction above the bowl with a GS. The SH has nothing but air. You can see the resistence in a photo like this. LMAO! I don't see a worthy comparison here.
Zow237
Well-Known Member
There is def resistance. Just tested it haha. Less than the og fp without the cap though. Still the resistance doesn't effect anything with the Gs. I'll have to get a sh to see what you are saying steamLook at all the restriction above the bowl with a GS. The SH has nothing but air. You can see the resistence in a photo like this.
Last edited:
Zow237
Well-Known Member
@steama so funny I never noticed the resistance till now. So with more air flow you can extract better faster? I just don't see how my clouds could get any bigger or get me more medicated haha. gs medicated me much faster and better than the og fp. The vas just keeps growing for this Sh. So I don't need need a carb cap for the Sh if just using for herbs?
Vapetologist
HamsterDAMAGED
Sorry to butt in here...I noticed the same thing. Its the base of an electric enail from Vapium, mine died after a week but it was beta - I was devastated! @steama does yours still work?
Zow237
Well-Known Member
Sorry, I am either confused, stoned, or both.my natural state
EDIT: Oh I figured your post out @Vapologist . This is not my GS, I just snagged it off the internet to discuss air-flow resistance (or the lack of) with @Zow237
Lol, sorry for the confusion.
I forgot I tested it with the cotton ball in. I'll confirm later without one to see how much resistance there is
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
...When you get your Shower Head it will blow your mind. It blows everybody's mind. No one is really ready for how wonderful this vape is.
I feel great that I have a shower head every single day. I have never felt this way about a vape..hell any product for that matter. I love this thing.
That's how I feel about every piece of NewVape equipment I've ever bought.
Best money I ever spent.
Zow237
Well-Known Member
I can't wait until you get a shower head...man, you are going to love it because you seem like you are a true vapor fanatic. Only real fanatics have glass symphonies...
...or shower heads for that matter.
I hope so and anything to keep me from burning! gs is the closest thing to smoking for me and I love my flower so I love my gs haha. I barely turn on my fp. Because of the gs. But would love to turn on a Sh haha
ParanoidAndroid998
Well-Known Member
Need some advice. I REALLY want this piece, I think it would pair great with the FP.
Only thing is it doesn't come in 18mm. Would anyone else consider this a deal breaker? I was hoping to go with 18mm to keep everything wide open, but it only comes in 14mm.
Does anyone have experience with both 18mm and 14mm and prefer one over the other?
Only thing is it doesn't come in 18mm. Would anyone else consider this a deal breaker? I was hoping to go with 18mm to keep everything wide open, but it only comes in 14mm.
Does anyone have experience with both 18mm and 14mm and prefer one over the other?
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
I use, and like both 14mm and 18mm. Lots of both.
Really... I've never taken hits through a 14mm piece and thought to myself that it seemed restricted... every 14mm piece I have can keep up with the ShowerHead uncapped.
P.S. Great piece... and great seller! Check out their "flower beast" with SOL perc. Just ordered one myself a few minutes ago.
Really... I've never taken hits through a 14mm piece and thought to myself that it seemed restricted... every 14mm piece I have can keep up with the ShowerHead uncapped.
P.S. Great piece... and great seller! Check out their "flower beast" with SOL perc. Just ordered one myself a few minutes ago.
ParanoidAndroid998
Well-Known Member
Thanks, yeah that's the other one I'm still considering... Just worried it's going to be too big. I don't have very large lung capacity. Have you tried the FC-186? It's a similar size.I use, and like both 14mm and 18mm. Lots of both.
Really... I've never taken hits through a 14mm piece and thought to myself that it seemed restricted... every 14mm piece I have can keep up with the ShowerHead uncapped.
P.S. Great piece... and great seller! Check out their "flower beast" with SOL perc. Just ordered one myself a few minutes ago.
Vapetologist
HamsterDAMAGED
I'm still thinking this 12" CCG SOL piece would be great for the Showerhead.
This piece IMO is ideal as it allows good distance between your face and the FP, and actually has low volume so that lowers the amount of air you need to take(or cycle) before the vapor hits. This is next on my list!
ParanoidAndroid998
Well-Known Member
I've been considering that one also. You reckon it's lower volume than the FC-186 and Flower Beast SOL?
Edit: Oh is that section on the inside of the fab egg style tubing negative space? As in taking up the inner space of the tube rendering less overall space inside? If so, I'm goin for that one.
Sorry that sounded hella confusing.
I have been looking at this sweet little piece.
TAG - 9.5" Fixed Super Slit Showerhead Froth Diffuser 65x5MM
Yeah, I'm more heading in the TAG direction with that kind of piece atm. Great minds and all that
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
I love my 12" TAG superslit... but I often wish it was about 2" shorter because of the weight and my table height. I think the 9.5" Steama posted or the 10" that TAG also sells might be better for me. I have a 10" two-tone green bent neck chinapipe from chinafactorycorp (seriously... no idea who made it...) with a wierd vortex diffuser and it's about perfect.
You guys tell me how you like yours when they arrive... I like TAG stuff a lot.
You guys tell me how you like yours when they arrive... I like TAG stuff a lot.
Vapetologist
HamsterDAMAGED
I have a smaller version of this, and its AMAZING. The larger version can't be too far off. Can't wait!
Ouch, if they are using the Hyer Big E-Rig as a base to hold their glass then I guess that's why we don't see many posts for the Hyer.Sorry, I am either confused, stoned, or both.
EDIT: Oh I figured your post out @Vapologist . This is not my GS, I just snagged it off the internet to discuss air-flow resistance (or the lack of) with @Zow237
Lol, sorry for the confusion.
Last edited:
Vapetologist
HamsterDAMAGED
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
My FlowerPot usage has evolved... again.
Pretty much all I want to do with it any more is ShowerHead full buds (about the size of pencil erasers or small marbles) at 650-ish uncapped. I break the buds down (with the tip of a Ti tool, mashing against the inside wall of the bowl) as the draws progress and the herb gets drier and crumblier. Smaller chunks as the draws progress. Stirring grounds at the end.
Amazing flavor!! Plus, I feel that I get the best overall taste throughout multiple draws, not just one flavorful hit at the start.
My grinders are collecting dust.
P.S. Nice setup, @Stu ! That's what I was running before a recent teardown... Claisen and all!
Pretty much all I want to do with it any more is ShowerHead full buds (about the size of pencil erasers or small marbles) at 650-ish uncapped. I break the buds down (with the tip of a Ti tool, mashing against the inside wall of the bowl) as the draws progress and the herb gets drier and crumblier. Smaller chunks as the draws progress. Stirring grounds at the end.
Amazing flavor!! Plus, I feel that I get the best overall taste throughout multiple draws, not just one flavorful hit at the start.
My grinders are collecting dust.
P.S. Nice setup, @Stu ! That's what I was running before a recent teardown... Claisen and all!
Last edited: