Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
ParanoidAndroid998
Well-Known Member
@disGRUNTled I didn't realize you had a FP and Mighty. I have a Mighty and am still trying to figure out if the FP will be worthwhile upgrade. Thoughts?
Chicken #420
I and I be Irie Vaping with U and U in Zion, mon!
Another new Ti Carb Cap (PagodaCap! 
) owner as of today! Mine arrived a few hours ago. So far, I'm favorably impressed... time will tell. As others have posted, this thing is LIGHT!
Still want a Ti LolliCap though!
) owner as of today! Mine arrived a few hours ago. So far, I'm favorably impressed... time will tell. As others have posted, this thing is LIGHT!Still want a Ti LolliCap though!
Last edited:
The Mighty would be a great conpanion to the Flowerpot. It's cordless and self-contained, so quite the opposite really.
As far as medicating potential...you would be hard pressed to find a device which could get you "more stoned" than the FP; but it really depends on tolerance IMO, if I only did one puff a day I wouldn't need a flowerpot.
The "Best Of" threads are actually made up of posts nominated by members. Anyone is welcome to nominate posts from this thread, and if we get enough nominations to create a "Best Of" thread for the NVFP, then I will create one.
I hate to be that guy, but I actually do notice some (very mild) hot spots with the wraparound that I never see with the SH. I don't even bother to stir the SH bowls as the abv comes out so very evenly vaped. It's Mighty-esque.
Here's a pic of a bowl after a couple hits from the wraparound. As I said, it's very mild and almost un-noticeable if your not looking for it.
The "Best Of" threads are actually made up of posts nominated by members. Anyone is welcome to nominate posts from this thread, and if we get enough nominations to create a "Best Of" thread for the NVFP, then I will create one.
I hate to be that guy, but I actually do notice some (very mild) hot spots with the wraparound that I never see with the SH. I don't even bother to stir the SH bowls as the abv comes out so very evenly vaped. It's Mighty-esque.
Here's a pic of a bowl after a couple hits from the wraparound. As I said, it's very mild and almost un-noticeable if your not looking for it.
Yeah, thats one reason why the SH became a thing
Square4Life
Well-Known Member
This makes me very happy to see. I had a really hard time deciding on which head to go with initially and ultimately decided on SH because I do not have access to concentrates on a regular basis. I guess it should've been a no-brainer but I wanted to make sure I was getting the right 'fit'.The "Best Of" threads are actually made up of posts nominated by members. Anyone is welcome to nominate posts from this thread, and if we get enough nominations to create a "Best Of" thread for the NVFP, then I will create one.
I hate to be that guy, but I actually do notice some (very mild) hot spots with the wraparound that I never see with the SH. I don't even bother to stir the SH bowls as the abv comes out so very evenly vaped. It's Mighty-esque.
Here's a pic of a bowl after a couple hits from the wraparound. As I said, it's very mild and almost un-noticeable if your not looking for it.
Went ahead and placed my order with NV and decided on the SH with 14/18 female and a 14 male shorty bowl. Now it's back to the waiting game....ugh haha
MinnBobber
Well-Known Member
I hate to be that guy, but I actually do notice some (very mild) hot spots with the wraparound that I never see with the SH. I don't even bother to stir the SH bowls as the abv comes out so very evenly vaped. It's Mighty-esque.
Here's a pic of a bowl after a couple hits from the wraparound. As I said, it's very mild and almost un-noticeable if your not looking for it.
I don't get why the wrap-around does not use the same lower threading and nut as the showerhead and taper out to the larger multi hole pattern on the bottom. Should get a bit of venturi effect that way + more even browning.
Seems like these two ends should be the same for maximum surface area and dispersion of hot air at the bowl
with the only difference being the showerheads larger air inlet (would stay the same)
I guess it would be more advanced to mill something like that and take more time though. Not sure if it would have to be cast to get the proper airflow routing? Or maybe I had way too many FP bowls today. Wouldn't surprise me!
Last edited:
$80, showerhead and nut incoming. FPAS =/
SHOWER POWER!!
I forgot the ti showercap, so it wasn't exactly as cheap as I was hoping... I guess I'll have to eat plain pizza for a bit.
I don't get why the wrap-around does not use the same lower threading and nut as the showerhead and taper out to the larger multi hole pattern on the bottom. Should get a bit of venturi effect that way + more even browning.
Seems like these two ends should be the same for maximum surface area and dispersion of hot air at the bowl
with the only difference being the showerheads larger air inlet (would stay the same)
I guess it would be more advanced to mill something like that and take more time though. Not sure if it would have to be cast to get the proper airflow routing? Or maybe I had way too many FP bowls today. Wouldn't surprise me!
That would be the best of both worlds, those five holes fanning out into twenty or so.
EDIT: Hmm, 5 into 20 wouldnt work, I guess it would have to be those 5 holes angled so the air hits the edges of the bowl.
So, 480f didnt toast my load when I forgetfully left the Showerhead on, but 560f most definitely just did!
Got a big conduction hit when I did eventually hit it tho. Another reading to try and remember to take - how long does it take for the bowl to heat up to potentially add any conduction effect, if at all.
Last edited:
Morning guys 
My showerhead parts should arrive today and my DHGate controller has just been despatched too
[edit] Showerhead parts arrived from @VapeFiend.com, just waiting on DHL now..
[edit2]
Today's haul
My showerhead parts should arrive today and my DHGate controller has just been despatched too
[edit] Showerhead parts arrived from @VapeFiend.com, just waiting on DHL now..
[edit2]
Today's haul
Last edited:
Morning guys
My showerhead parts should arrive today and my DHGate controller has just been despatched too
[edit] Showerhead parts arrived from @VapeFiend.com, just waiting on DHL now..
[edit2]
Today's haul
If its the NV approved controller, you'll very likely be up and running by the end of the week
Watching Vapefiends latest video (on cbd crystals, recommended btw in the Showerhead, I liked them a lot), and I spy an NV controller by the side of him. Maybe we'll get an FP video in the next week or so.
Last edited:
So with this months 10% discount £360?
I don't know if there's something they forgot to list, but even with a stand/debowler and the controller from DHgate, my total is less than £390 and the stand is 60 by itself.
Last edited:
Controller on 580f. Ktype digital thermometer probe attached to the screen in the bowl. Showerhead on the bowl. I'll be back with an edit when the temp settles, without drawing.
Ambient conduction temp tests commencing
EDIT: Took about 2 to 3 mins to get up to 270f, climbing rapidly, and so far a further 5 mins climbing very slowly up to now being at 315f. At 6 minutes its slowed down considerably at 320f.
Thats really minimal conduction at lower temps. I'll try upping to 650f next, a more average setting that ppl use.
EDIT2: 650f slowed down the temp increasing in the bowl at around 370f, still rising but so slow that unless one forgets to take the head off for like 15 minutes, probably not an issue.
EDIT3: 19 minutes in. The internal bowl temp is at 375f. The 18mm connection lower part of the bowl is hovering around 270f. Controller still set at 650f. Dish temp cycles between 500f and 550f
Ambient conduction temp tests commencing
EDIT: Took about 2 to 3 mins to get up to 270f, climbing rapidly, and so far a further 5 mins climbing very slowly up to now being at 315f. At 6 minutes its slowed down considerably at 320f.
Thats really minimal conduction at lower temps. I'll try upping to 650f next, a more average setting that ppl use.
EDIT2: 650f slowed down the temp increasing in the bowl at around 370f, still rising but so slow that unless one forgets to take the head off for like 15 minutes, probably not an issue.
EDIT3: 19 minutes in. The internal bowl temp is at 375f. The 18mm connection lower part of the bowl is hovering around 270f. Controller still set at 650f. Dish temp cycles between 500f and 550f
Last edited:
You could do 5 into 10 with 5 angled holes on the bottom bisecting off of the 5 straight bore holes.
Yes that would be one approach, but a little cheeky I think and they are essentially great guys trying to provide the best service and prices I'm sure. So I wouldn't want to abuse the privileged of the £5 off code.
Unfortunately they just can't offer better prices for the overall package at the moment. If they had all of the parts I will want, such as a male stubby bowl, and the new titanium Showercap, I'm sure I wouldn't grumble over a few quid.
However by going direct to Newvape and DHgate, customs and postage included, you could basically get yourself a free stand and debowler.
I'm pretty sure I have done all of the sums correctly at least. All said I am sure that Vapefiend will be knocking out Flowerpots left right and centre from here on!
I also can't wait to hear George's impressions of the Flowerpot. Just like @Sneaky Pete , George is such a real, humble, down to earth and honest guy with a great ability to express himself in such an easy way for othes to follow and relate to.
We are very lucky to have these genuine guys to share solidly unbiased and honest reviews of all the vapes out there. @VapeFiend.com and @Sneaky Pete huge repsect guys thanks for all your services and keep it up!
Edit - just saw your edit @Pyr0 . Im sure I worked out the total at about £365 ish last night for equivalent order from Newvape and Dhgate. So the debowler would be essentially free?
Last edited:
Yes just passing time and having fun with the prices and also to keep things clear for everybody else, that is all. Not from a personal perspective so much.Yeah, cheeky maybe, but the codes are there to use. I just used the 10% one on my whole order.
I only mentioned it in passing as I'd seen you posting saying you had to get funds together and you keep working out sums
If my Aromed vaporizer does sell then I should be okay, I am waiting on some additional developments to be confirmed and I should be good to go.
I do have just enough put by for an unpcoming health treatment in December which I could use to fund the FP and simply replace in time if I can pull a few things together, so it is looking good, just a lot of "If's" and "whens" to keep a watch on.
Last edited:
Doktor Dub
Well-Known Member
@VapeFiend.com or whoever may know this: Does the starterkit from vapefiend come with uk and eu plug?
Thanks in advance, have a great day all!
Thanks in advance, have a great day all!
Nice haul! And vipes?!
The Vipes (Vape wipes) were freebies,they always chuck one or two in with orders
I already have a box of em at home
https://vapefiend.co.uk/vipes-vape-wipes
I already have a box of em at home
https://vapefiend.co.uk/vipes-vape-wipes