Likes2vape

Well-Known Member
I have been using the CF mouthpiece set up instead of the CFV mouthpiece and find I like it way better. Even with the new mp oring I just didn't enjoy it unless it was through a bong until I decided to see if the CF mp would fit. It's doesn't fit perfect but it's what I use now and get way bigger clouds.

Did any other CFV pre orders get their CFC? I got mine a couple of days ago and this little thing is pretty freaking sweet. Fits in the pocket great heats up super fast just like all boundless vapes and the battery life is freaking awesome. I lost count after bowl 5 but it still shows around half full and I've used it 3-4 times at least after I lost count. The only problem I have had is the screen in the bowl comes out when you empty it. I haven't lost it yet but I'm sure I will.
 

PPN

Volute of Vapor
In case there were still doubts, I confirm that the EasyFlow glass mouthpiece for the Crafty/Mighty is fully compatible with the CFV/SwiftPro. I just received mine.
Where? I'm unable to find them even on the Storz&Bikel website...
 
PPN,

KeroZen

Chronic vapaholic
Where? I'm unable to find them even on the Storz&Bikel website...

Yeah they are not an official S&B add-on, I think they are from some UK company if I'm not mistaken? Many Euro head and vape shops carry them, but most were out of stock before Christmas when I ordered.

In the end I got mine from a Spanish head shop called Edabea. Clearly not the kind of place I like to be associated with, as they carry shrooms and other "magical" stuff... but I made an exception and shipping was relatively fast.

I didn't find them on Chinese sites yet but my intuition tells me those are manufactured over there...
 
KeroZen,
  • Like
Reactions: vapen00b

Baron23

Well-Known Member
I bought the easy flow water adapter and glass MP from Vapefiend just recently. I'm US based and it shipped via mail.

Sneaky Pete's also carries them but they are Canadian and not US based either.

I haven't found any US retailers selling them, though.
 
Baron23,
  • Like
Reactions: KeroZen

b0

Cloudy...
I bought the easy flow water adapter and glass MP from Vapefiend just recently. I'm US based and it shipped via mail.

Sneaky Pete's also carries them but they are Canadian and not US based either.

I haven't found any US retailers selling them, though.

How they work, do they improve the experience?
 
b0,

elykpeace

exVASted
Still love my cfv. Received my cfc from the pre order (September) and it works nice. Way huge oven. I still prefer cfv over everything tho. Charge it when needed and it's always ready to go. I can get it to the color id like through a stevenlmz hydrotube (33$) that uses the 18.8 mm wpa. Usually clear an arizer eq bucket in 3 hits max temp... I am awaiting the SS chamber replacement and micro bub when they become available from Casey's guess what item of clothing he actually bought haha. (Live stream) anyways having tried all but the cf and cf710 I love bndlstech and this desktop comming this year will be awesome to add to the already great arsenal of bndls

Eric hit me up about the secret stream I think I emailed you but I want in!! ")

Was thinking about throwing 90 bucks for a MVT from Dave (mistvape touch) but I think my VAS is satisfied (for now)

If your looking for a clean tasty cloud hit up www.bndlstech.com order a cfv from puff it up (preferred vendor) and enjoy. Battery life is good.. you have to stay on top of it but if you can wait 45 mins to charge (or not because it has pass thru charging) this is an amazing combustion fucker. And I think as @stickstones mentions truly shines thru water
 

Baron23

Well-Known Member
How they work, do they improve the experience?
I just got them yesterday and haven't tried them yet. The glass MP fits on just fine with a provided small silicon sleeve and looks very usable.

The WPA may need a bit of tweaking. It screws in where the CU normally would but the flanges on the WPA aren't tapered like the CU, hence the big warning "don't try to tighten all of the way or you will likely crack the housing that holds the CU". I think a couple of minutes of very light dremel tool work (or even just a bit of a file or sandpaper) would make the fit a bit better.

This a bit off topic for a Boundless vape thread, yeah?

Cheers
 
Baron23,

Alegre

Pobre payaso
Still doing burn offs!

I can't get rid of that smell! Haven't even vaped with it yet. Am I the only one who's CFV smells that strong?
 

jdent3

Well-Known Member
Managed to get one of these from BOBHQ for $175 Canadian. I've been wanting one for a while but felt like $275 Canadian was overpriced. I'm pretty excited to try it. It basically cost me the same as my CF did.
 
jdent3,

sickmanfraud

Well-Known Member
Managed to get one of these from BOBHQ for $175 Canadian. I've been wanting one for a while but felt like $275 Canadian was overpriced. I'm pretty excited to try it. It basically cost me the same as my CF did.

BOBHQ ??? Who or what is that?
 
sickmanfraud,

Mulehead

Well-Known Member
Still doing burn offs!

I can't get rid of that smell! Haven't even vaped with it yet. Am I the only one who's CFV smells that strong?

I had a very slight smell that went away after the first use.
IMO a lot of the smells in new devices come from the foam packaging that they're shipped in.
 

KeroZen

Chronic vapaholic
Yeah, I tested many many models coming from that factory, and when I unboxed my SwiftPro I was a bit anxious whether I would be greeted by robot farts or not. The device shell had a noticeable smell, but as @Mulehead said it was just impregnated by the box packaging foam.

As it was just under my nose I could smell it at first but it dissipated really quick. On the other hand, I did several empty burn-offs as usual, I tasted and licked the mouthpiece too just to be sure, and oh to my great surprise there was nothing funky, no new car smell, no polyimide tape glue, no weird silicone glue nor plastic smell. It wasn't 100% neutral at first but close to (hence the 2 or 3 empty burn-ins I did, but beware not to reverse the air flow on this one this could overheat the air intake! you need to blow in the bottom hole, not the mouthpiece)

My first bowl with the device was magical taste-wise. Really excellent and I dare to say almost better than my Zions, at least on par, but less full-bodied as expected (it was set to a medium temperature)

Really, I think this time Smiss nailed it right! It's good to very good on most fronts, the only big negatives are: battery life and use of plastics in the vapor path (same as Crafty somehow?)
 
Last edited:

b0

Cloudy...
Really, I think this time Smiss nailed it right! It's good to very good on most fronts, the only big negatives are: battery life and use of plastics in the vapor path (same as Crafty somehow?)

Another negative, at least for me, not being able to get a full extraction. Would be sweet if there was a way to update temp and add a 10% like what they had to do with the FF2. Or maybe a boost function like other vapes.

Lets see if this improves with the SS ring and the quartz mouthpiece.
 

OyVape

Well-Known Member
A Canadian vendor. I had never heard of them either but someone on reddit posted saying they were having 40% off all Boundless vapes so I had to get one.

Just went to BOBHQ site but no 40% discount visible anywhere.
 
OyVape,

Boundless Vape Technology

Well-Known Member
Manufacturer
Hey everyone, here is the link to today's live stream:

Sesh with the Boundless team while we answer questions related to our units. All questions are welcomed and we will do our best to help out with tips or clarify any misconceptions. Hope to see you all there, if you can't make it a recording of the stream will be available on our Youtube channel: https://www.youtube.com/channel/UCEWHp-Y9Vx84-GHWTAX_AVQ
 

b0

Cloudy...

sickmanfraud

Well-Known Member
The sale ended Friday.

It seems that we have closed the barn door after the horse escaped.

If anyone on the thread stumbles upon a good or GREAT deal, perhaps a heads up would be nice. I don't know anyone, with the possible exception of one of my daughters, who is opposed to saving money.

For the CFV owners who complain about extraction I would suggest an Arizer Extreme Q screen (top hat) instead of a ring.

Leave the bottom screen in place the Q screen on top of the screen. The retaining ring will hold the screen in place for filling.

Once the "top hat" is filled and open side up I take a screen, put it into the bottom of the retaining ring stopping the cannabis from flying around and the mouthpiece does not foul with tiny bits.

I vape on 200 C and the herbs are quite extracted in one 4 minute session. Sometimes I have turned the unit back on for a couple of additional draws. Usually 4 minutes is enough.
 
Last edited:

beefsupreme

Well-Known Member
Did anyone who was able to hear on the Livestream catch a reply for when the bubbler, mini-mouthpiece and steel oven ring will be coming out? Will it be through puffitup or bndlstech themselves?
 
beefsupreme,

Cl4ud3

Well-Known Member
Did anyone who was able to hear on the Livestream catch a reply for when the bubbler, mini-mouthpiece and steel oven ring will be coming out? Will it be through puffitup or bndlstech themselves?
Next couple of weeks by the sound of it. This week I think for the bubbler but it won't be Boundless selling them as they are no longer selling direct. Also not sure which store is selling them but a good guess would be POTV and Puffitup.
 
Top Bottom