Boundless CF / CFX / CF-Hybrid
- Thread starter smokey_da_vape
- Start date
-
- Tags
- boundless
ProfessionalHandJob
"A handjob is still a job, okay?"
My CFX+ is in the mail heehee
Finessseee
Well-Known Member
Is it really? How did you end up getting a pre order? Are you one of those special vape enthusiasts that test products early? Kinda jealous and curious how the CFX+ hits!
ProfessionalHandJob
"A handjob is still a job, okay?"
Yeah It’s a demo unit from Boundless. Should be here Tuesday :-) So I’ll give it a workout once it arrives and post some thoughts and pics. I’ve got the CF and Tera in my collection to compare it with as far as Boundless stuff goes, along with my other vapes.
Finessseee
Well-Known Member
Awesome! Hope you enjoy it. Looking forward to the mini review
Vexil just arrived today.Thanks Eric and BNDLSTECH Team!!! I know this is the CF/CFX blog but will post impressions on the Vexil Blog. Looks very well built and has the zirconia mouthpiece thingy. I have/had a CFC 2.0 and a CFC lite so I am interested to see differences in the platforms.
Last edited:
ProfessionalHandJob
"A handjob is still a job, okay?"
Received my CFX+. Doing a burn off, then I’ll break it in and be back in a day or two with some thoughts.
POST SESH EDIT: Since I can still edit the post still, here’s an ABV shot after running the herb through 2x 8min sessions at 430F
Here’s a pic of the loading area (this is a pain in the ass, if not perfectly clean of herb bits the mouthpiece won’t seal and you won’t get vapor)
And the mouthpiece with the air path removed
After that 16min double session with one oven load, it had me sweating and I was thoroughly medicated. Conduction vapes are
Battery lasted about 5x 8min heat cycles from a ~95% charge. The battery isn’t totally dead, but dead now enough I wouldn’t want to run it again as is.
POST SESH EDIT: Since I can still edit the post still, here’s an ABV shot after running the herb through 2x 8min sessions at 430F
Here’s a pic of the loading area (this is a pain in the ass, if not perfectly clean of herb bits the mouthpiece won’t seal and you won’t get vapor)
And the mouthpiece with the air path removed
After that 16min double session with one oven load, it had me sweating and I was thoroughly medicated. Conduction vapes are
Battery lasted about 5x 8min heat cycles from a ~95% charge. The battery isn’t totally dead, but dead now enough I wouldn’t want to run it again as is.
Last edited:
endof3d
Cognitive Dissonance D 5 +
Received my CFX+. Doing a burn off, then I’ll break it in and be back in a day or two with some thoughts.
POST SESH EDIT: Since I can still edit the post still, here’s an ABV shot after running the herb through 2x 8min sessions at 430F
Here’s a pic of the loading area (this is a pain in the ass, if not perfectly clean of herb bits the mouthpiece won’t seal and you won’t get vapor)
And the mouthpiece with the air path removed
After that 16min double session with one oven load, it had me sweating and I was thoroughly medicated. Conduction vapes are
Battery lasted about 5x 8min heat cycles from a ~95% charge. The battery isn’t totally dead, but dead now enough I wouldn’t want to run it again as is.
Thanks for the photos and your thoughts!
Only other time I've seen a stirrer and debowler integrated in to a unit is on my Davinci IQ2. Nice! The Zirconia mouth piece looks to be an improvement.Questions:
Was the mouth piece and vapour noticeably hot at 430F?
Has the bowl size been reduced from the OG CFX?
ProfessionalHandJob
"A handjob is still a job, okay?"
The mouthpiece doesn’t do much in the way of cooling. At 430F I was coughing a bit, and a few hits did taste almost borderline combustion towards the end. I’m thinking that’s because I ran the sesh for 16 mins though. Didn’t use the stirrer at all, from the way the ABV came out I don’t think it’s really needed. The roast is very even throughout the bowl.Thanks for the photos and your thoughts!
Questions:
Was the mouth piece and vapour noticeably hot at 430F?
Has the bowl size been reduced from the OG CFX?
I don’t have a CFX to compare ovens with, but I do have a CF; and the ovens appear to be the same size. Here’s the CFX+ oven next to the CF, although hard to tell from the pic they look the same size and depth to me.
ProfessionalHandJob
"A handjob is still a job, okay?"
Go big or go home
Also wanted to see if the device was able to combust. It got close maybe, but it didn’t.
Must be a dodgy vape to need water cooling at that temp but each vape is different, my Xmax Ace will char above 180c(355f) the way I use but if there is no smoke coming from a vape all is good IMO.
Edit, I am just glad Boundless have given us the choice to get as close to combustion as we like...not like some nanny manufacturers
ProfessionalHandJob
"A handjob is still a job, okay?"
Agreed, it's nice that they have the 430 option that gets that dark. Leave it up to the user if they want to push it that far or not.
pop22
Well-Known Member
I run at that temp and get lots of vapor ( solo II ) and we like it cool as possible, We even pop the bong into the freezer for 20 minutes before use! however it vapes fine directly. I could likely run it lower but that is also the optimum temp for extracting all cannabinoids.Must be a dodgy vape to need water cooling at that temp but each vape is different, my Xmax Ace will char above 180c(355f) the way I use but if there is no smoke coming from a vape all is good IMO.
Edit, I am just glad Boundless have given us the choice to get as close to combustion as we like...not like some nanny manufacturers
endof3d
Cognitive Dissonance D 5 +
The AVB in that CFX looks rather dark for 430 F, but nice to know you can get right to the line. To my knowledge, combustion of flower occurs above 450F. The times that I took the Flower Mate Nano up to it's max temp 448F it was plenty hot but no combustion. No reason to go above 430F for full extraction though. Have a temp/extraction chart but can't load it here.
I have been talking to Eric at Boundless and the company is hoping the release date of the CFX+ for sale to the public will be mid-April.
Boundless do this to make any tweaks or find unforeseen bugs seasoned users may come across before the final release of the device to the masses.
It is not just influencers that get the pre-release units to create hype as I have a sample coming in the mail (Oz post dates just seem to keep getting longer) and Eric knows I am a forum guy only, no Instant anything for me!
Reposting this from the CFX+ thread -
"Thank you all for the continued support, we greatly appreciate the interest in the CFX+. I have been notified that the units have landed at our warehouse and should be ready to ship by the middle of next week. Today at 4:20pm Pacific, we will be hosting a live demo of the CFX+ on our Instagram page - https://www.instagram.com/bndlstech/. We will be going through the features and running a few sessions to show the performance of the unit. A new CFX+ will also be given away during the stream. Feel free to come ask questions or hang out and sesh along!
If you do not have an Instagram and would like a recording of the stream, please send me an email to Eric@bndlstech.com so we can get that over to you. Feel free to PM or email with questions anytime."
"Thank you all for the continued support, we greatly appreciate the interest in the CFX+. I have been notified that the units have landed at our warehouse and should be ready to ship by the middle of next week. Today at 4:20pm Pacific, we will be hosting a live demo of the CFX+ on our Instagram page - https://www.instagram.com/bndlstech/. We will be going through the features and running a few sessions to show the performance of the unit. A new CFX+ will also be given away during the stream. Feel free to come ask questions or hang out and sesh along!
If you do not have an Instagram and would like a recording of the stream, please send me an email to Eric@bndlstech.com so we can get that over to you. Feel free to PM or email with questions anytime."
Hey Nineteen
Well-Known Member
But will chamber screens be available ? 
Old B52H Gunner
Boomer
Wow crickets in here, I was hoping to see if there was ever going to be a wpa.
pop22
Well-Known Member
I was wondering that also!
Hey Nineteen
Well-Known Member
Just pulled out the OG CFX. I had forgotten just how powerful it is. It seems to work better when the bowl is full. When it isn't filled all the way sometimes you have stir. Putting this back in rotation.
blisty
Active Member
You use it with the standard mouthpiece of the WPA with a bong?
TheMercurialNo.10
Well-Known Member
I bought the new CFX+ as a handheld as I couldn't find anywhere selling a Tera...one month later and now the charging indicator only charges to 95%.
My Tera stopped working within 3 months, when it randomly started heating up uncontrollably but I just couldn't get sorting sending it back.
Bad vibes about the battery showing 95% on a new unit with batteries that can't be easily replaced on this CFX+. Disappointing tbh.
Used an old CFX until it actually disintegrated, but I'm starting to really doubt Boundless. Would love the Tera back working tbh.
My Tera stopped working within 3 months, when it randomly started heating up uncontrollably but I just couldn't get sorting sending it back.
Bad vibes about the battery showing 95% on a new unit with batteries that can't be easily replaced on this CFX+. Disappointing tbh.
Used an old CFX until it actually disintegrated, but I'm starting to really doubt Boundless. Would love the Tera back working tbh.
pop22
Well-Known Member
Think I read that trhis is just a gauge issue, but message Boundless support anyway, I would!
And I had FIVE Teras with that same problem, apparently they never fix the issue, contrary to what they told me! I made them give me a CFX+ to replace the Tera.