Battery Free Ganz - The Flare Induction heater

SockPuppetTheatrics

SockPuppetTheatrics

Well-Known Member
popitup said:
What's that tip (mouthpiece, not the stunner) he's using with the 3TM in the video?

https://imgur.com/2Dckc9o

Can't wait for this thing to be released.
Click to expand...
Also interested in the MP on this one; I was planning in using the 3TM with the TA4 once it's released, and I wanted to get a better MP for it.

Kinda torn between this and the Forge. May come down to availability of and performance with adapters for Tempest / Anvil / TA
 
SockPuppetTheatrics,
VapingYogi

VapingYogi

Pranayama; of a sort.
Jojofernz said:
I heard June, I’ll have to verify where haha
Click to expand...
I got a Instagram response saying "set your calendar for May" when I asked what the ETA was. I might have been bugging them about it for a while :)

I saw that the Flare will work with the TA's - hence its probably the major item on my list atm

SockPuppetTheatrics said:
May come down to availability of and performance with adapters for Tempest / Anvil / TA
Click to expand...
I have been wondering if there will be adapters - wait - isn't the forge depth adjustable? - eh doesn't matter other thread
 
VapingYogi,
  • Like
Reactions: LotV
T

TheScamericann

Active Member
Any word on an expected release window? I've saw a few posts on reddit claiming dynavap sent yll vape a patent claiming yll's induction heater infringes on a patent dynavap owns for induction heaters. Hopefully this isn't going to have an affect on the flare but everythings went silent in regards to it so who knows.
 
Singularity Walker

Singularity Walker

Well-Known Member
Looking forward to this device but I must say I have a concern that I hope gets addressed in firmware.
Based on the Sneak Peak video of the beta:
@ 1:49 - "I find it's best to just max out the wattage and the induction heater will make adjustments based on its sensor."
Then during the Anvil portion of the video to get the detection to give more wattage to the Anvil it had to be wrapped in a Simrell FMJ.

The decision to so significantly override the user wattage input setting based on a detector and firmware algorithm they've set bothers me. Especially given that the decided settings for several devices in video stay near the same range as the Wand (60 watt is the number I've heard for The Wand) (ex: Dani v3 ??w, Fusion II 120w, Anvil 55w, Anvil+FMJ 105w, TA 70W, Stunner ??w, M+ 45w). Entries with ?? had the wattage display blocked during heating.

If the user's choice of wattage / joules / power output level gets overridden then the device is mostly a timer device that can achieve a higher max with 'select' devices and gets more hits with others unless I am missing something else.
 
Last edited:
Singularity Walker,
  • Like
Reactions: chimpybits
oddjobold

oddjobold

Vape swap shop
Singularity Walker said:
Looking forward to this device but I must say I have a concern that I hope gets addressed in firmware.
Based on the Sneak Peak video of the beta:
@ 1:49 - "I find it's best to just max out the wattage and the induction heater will make adjustments based on its sensor."
Then during the Anvil portion of the video to get the detection to give more wattage to the Anvil it had to be wrapped in a Simrell FMJ.

The decision to so significantly override the user wattage input setting based on a detector and firmware algorithm they've set bothers me. Especially given that the decided settings for several devices in video stay near the same range as the Wand (60 watt is the number I've heard for The Wand) (ex: Dani v3 ??w, Fusion II 120w, Anvil 55w, Anvil+FMJ 105w, TA 70W, Stunner ??w, M+ 45w). Entries with ?? had the wattage display blocked during heating.

If the user's choice of wattage / joules / power output level gets overridden then the device is mostly a timer device that can achieve a higher max with 'select' devices and gets more hits with others unless I am missing something else.
Click to expand...

To be honest, i had already expected i would be using this device on maximum most of the time. To heat up these larger devices we are pushing limits of what 3 x 18650s can do. I expect the forge will have better performance, but has a much bigger battery and larger unit.

Am i bothered about having to use a FMJ? Not really. Once its on its on, and you can forget it.

In fact does anyone have any recommendations here? I have a tempest, which i guess might need a FMJ. Whats best, FMJ, vaphit silver collar (large, small) ? Any one with a prototype done any experimentation?
 
T

TheScamericann

Active Member
oddjobold said:
To be honest, i had already expected i would be using this device on maximum most of the time. To heat up these larger devices we are pushing limits of what 3 x 18650s can do. I expect the forge will have better performance, but has a much bigger battery and larger unit.

Am i bothered about having to use a FMJ? Not really. Once its on its on, and you can forget it.

In fact does anyone have any recommendations here? I have a tempest, which i guess might need a FMJ. Whats best, FMJ, vaphit silver collar (large, small) ? Any one with a prototype done any experimentation?
Click to expand...
The battery packs the forge uses are just 3 18650s inside a plastic shell.
 
P

pop2012

Member
I found this update on another thread:

Dani Fusion by Battery-free Ganz

I learned years ago that clicking caps shouldnt be going anywhere near alcohol. Not just because it can damage the clicker but also because isopropyl isn't safe for consumption and there is no way of knowing what kind of residual oils it may leave behind once the alcohol has evaporated...
fuckcombustion.com
 
D

DaBouse

Well-Known Member
I’m considering picking this up as a more powerful IH for my upcoming tempest purchase. But haven’t heard from anyone who uses the combo. I’ve heard the wand leaves room for improvement in terms of power.
 
DaBouse,
  • Like
Reactions: vurt
M

maremaresing

Well-Known Member
I remember the BFG Dani v2 and v3 not being IH Compatible. Would that still hold true with this? Silver or the stainless aren't IH compatible?
 
maremaresing,
Sudolewdo

Sudolewdo

Member
VapingYogi said:
Early presale for the states; common Aussie options
Click to expand...
Yeah this is a bit of a dilemma for me. I'm really new to this style of vaping and only picked up my first Dyna in Feb. Tried a torch for a bit but found it hard to get good consistency. Deciding to try induction I did some reading and settled for the YLL2.0 over the Wand, because it was a bit cheaper and had more options to dial things in. It's been really great and I don't regret it for a second, but now I'm dead set on getting a Tempest as soon as they are available and I don't have an IH that's compatible xD.

The Flare sounds like the ticket as it appears to be a juiced up YLL2.0 which I'm already very familiar with. But with being in Aus, and with the Tempest about to drop, I'm not sure how long I'd have to wait (or how much I'd have to pay) to get my hands on one. Maybe I'll have to suck it up and just get good with a torch 🥲
 
You must log in or register to reply here.
Top Bottom