Aromed 4.0

Hogni

Hogni

Honi soit qui mal y pense
For use with the Aromed I'd ever have a look at the joint connection of your desired piece. It's not a question of stable stand alone. Don't forget there often is a bit of side/uneven pressure by the Aromed heater/goose neck. If the joint has just a thin glass connection it could break with ease.
 
V

vaporcrazy

New Member
Does anyone know where you can still purchase an Aromed replacement bowl? I have looked everywhere, but no one in the US seems to have them in stock anymore. I even tried to order from R&E directly, but they never responded to me.
 
vaporcrazy,
Abysmal Vapor

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
@vaporcrazy
I did a quicksearch for you. There are a couple of sites but i dont know if they are legit.
http://www.vaporizerchief.com/aromed-replacement-bowl/
http://www.vaporizergalaxy.com/aromed-replacement-bowl.html
https://tvape.com/glass-heat-chamber-aromed.html Tvape sounds familiar. I think they had presence at the forum.Also i think once i won a Grinder in a giveaway but couldnt get it because they didnt shipped internationally back then ,lol.. (also they are based in Canada not USA ).
https://myvapestoreonline.com/shop/...ods-e-juice-for-sale/aromed-replacement-bowl/
 
Last edited:
Abysmal Vapor,
V

vaporcrazy

New Member
Abysmal Vapor said:
@vaporcrazy
I did a quicksearch for you. There are a couple of sites but i dont know if they are legit.
http://www.vaporizerchief.com/aromed-replacement-bowl/
http://www.vaporizergalaxy.com/aromed-replacement-bowl.html
https://tvape.com/glass-heat-chamber-aromed.html Tvape sounds familiar.
https://myvapestoreonline.com/shop/...ods-e-juice-for-sale/aromed-replacement-bowl/
Click to expand...
Thank you for checking! I really appreciate it, however it does not seem to be available from either of these sites. On VaporizerChief there is no Add to Cart button like there is for every other one of their products. On VaporizerGalaxy the Add to Compare link gives a 404 page not found error. I think both of these are old pages that can only still be accessed due to Google still indexing their direct links. I've spent over an hour searching every site I could find, but these bowls do not seem to be available in the US anymore... :(
 
Hogni

Hogni

Honi soit qui mal y pense
All replacement parts are available at VDNM.
They've 3 different bowls in stock.
But shipping is pretty expensive - 35€ to the US!
 
V

vaporcrazy

New Member
splitz said:
I've always been successful in ordering directly via frank@aromed.com

With that said, I am unable to find the old Research & Experience site on the interwebz
Click to expand...
Thank you! I went ahead an ordered from VDNM. 52€ for shipping...ouch! I ordered 4 bowls so I have plenty of backups now :). Always good to know about other potential suppliers though so thanks for your response.
 
vaporcrazy,
Flower of empathy

Flower of empathy

Sometimes to stupid to become a fool
Accessory Maker
Damn, just left the aromed 4.0 at my sis, came home set up my new arrived VDN bubbler (not superthick glass like the Ehle AKW but pretty perfect size and super stable socket) installed a new bulb at the old aromed, loaded a bowl, turned the switch and nothing :uhoh: just the usual little transformer noise and the display working normal but no light :(
Over 2 hours i tried troubleshooting, looking inside for defects (the electronic parts are really well built btw), cleaning the socket, wiggling with the neck and finally the light came on a bit and went off again, so i thought it's the cables in the neck / socket connection - but i just loosened a tiny twist with the whole white lamp socket against the neck and the light started working again like nothing happened :clap::rockon: i'll probably look deeper into that - later, the first working testbowl was so much more satisfying than without the troubles :lol: finally :sherlock:
 
Last edited:
Flower of empathy

Flower of empathy

Sometimes to stupid to become a fool
Accessory Maker
yea, it's a good home i'll visit now even more often - rooftop in amsterdam centraal :D
Got also a new short bowl, to preserve the vintage ;) - a bit different shape, the original is more round at the bottom and looks better quality imo
Now to finish i just need to decide between showerhead and 6 arm diffuser downstem... :lol:
 
Flower of empathy,
  • Like
Reactions: Hogni
Trypsy Summers

Trypsy Summers

Well-Known Member
VapeKnight said:
I had a great sesh with the Aromed last night, I just love this vape...
Click to expand...
My friend, I've said it Plenty (pardon the pun) of times previously, but let me restate the obvious, yet again!
The AROMED 4.0 is one of the best 'open secrets' out there, ask any real peeps in the know, they'll all tell you, that when it comes to actual vapor quality, it's only known rival would be the One Above All! (aka The VOLCANO DIGIT):bowdown:

When it comes to regular desktop vapes, (not the sublimator, etc) then this is the terminus - cos there ain't no more stops after this one!;)

It has Outstanding Quality, get me right, it has a few finicky things, that I don't like but then again, so do most vapes, however, once you've developed your own technique, then this appliance is amongst the very best of the best for output quality, the only limiting factor would be the quality of your herb!:sherlock:

Aromed4.0, old style - brand new....:rockon:

Pure Peace:leaf:
 
vapirtoo

vapirtoo

Well-Known Member
I always wanted to try this vape, watching the Halogen lamp glow on demand as the herb shrinks and browns has to be a treat. An oldie but goody, glass on glass with a water tool! If I could rent it for a month;
I would love to experience it.
 
VapeKnight

VapeKnight

Day Tripper
sometimes I'm actually disappointed with the vapor production of the Aromed simply because it seems like its not extracting enough. However, the gentleness of the hits, flavor, even ABV, and potency of the high remind me that big clouds and coughing are not good benchmarks of a great vaporizer.
 
lazylathe

lazylathe

Almost there...
@VapeKnight

Man I hate it when you post in this thread!!
Always makes me find my Aromed 4.0, clean it and have a few sessions!!
It is a great vape but I think there is still some room for improvement in the design.

A smaller bowl would be awesome for small loads, a halogen bulb that fits perfectly in the herb chamber without all the extra space around the sides and an easier mounting system with maybe a break in the goose neck to make placing it on the bowl easier for a seal.
I would imagine this would also boost performance!
 
Hogni

Hogni

Honi soit qui mal y pense
Yep, performance of the goose neck is the bottleneck in use. Therefore I'm using a short bowl paired with a water tool of choice only. MUCH easier to use than fiddling the heater into the wobbly attached original water tool in the right angle.
 
VapeKnight

VapeKnight

Day Tripper
the recreational herb holder thats now available probably works better and one of these days I'll buy one... I agree that the goose neck and mount onto the glass could be improved but fortunately I'm still using the original glass which has never broken. Sorry to make you dig out and use the Aromed :)
 
Hogni

Hogni

Honi soit qui mal y pense
Do you mean the herb chamber? Which one do you mean and why should it probably work better? In which regard?
 
VapeKnight

VapeKnight

Day Tripper
I think the spacer mod made by forum member " steph" on page 36 would also be great. I would love to get one of those...
 
VapeKnight,
  • Like
Reactions: lazylathe
You must log in or register to reply here.
Top Bottom