Maine420
GROOVY GRANNY
It may be the charger that came with it. It happened to my M1D2. Luckily I have the charger from my M1A model, usable with my new Solo. You can order chargers on eBay.
Arizer Solo
- Thread starter Rockwise
- Start date
-
- Tags
- arizer battery powered
poonman
Well-Known Member
If your 2014 Solo has the pass-thru capabilities (Charge & use ) .
Then , I can't see why not . The upgrade was within the Solo itself to recognize function , nothing to do with chargers or PA .
hope that helps
spoutti
Well-Known Member
I have 2 solos with o-rings that doesnt screw all the way back. For over 8 months and it aint a problem for me. I just dont try to screw it completly. I can put my solo upside down and the stems stay put (i always feel one day it will fall, but didnt yet). It adjust the airflow of my pvhes to a charm. The only "problem" is my cap loosen up when on the go and i have to recenter my o-ring. It doesnt unscrew totally, just enough to let the oring wiggle inside.
Nice!I have had mine(M1E1) for a few days and this thing is a dream for me. My friends were amazed at the vapor output and the flavor. I have no clue why it took me so long to get one of these. So easy to run the wife has it right now for her massage she is getting soon but i need that shit back soon!
I do hear the call for His and Hers Solos! Anyone second the motion?
hd_rider
Well-Known Member
I do hear the call for His and Hers Solos! Anyone second the motion?
I second the motion, but only if her solo is PINK !
CarolKing
Singer of songs and a vapor connoisseur
Out of habit I go to my sweet spot of heat levels 4 and 5. Today I have been experimenting starting out on level 2 then go on to level 3 and work my up to 5. I get a decent amount of visible vapor at heat level 2 and it has a nice flavor. I checked my older model and had similar results. The two units seem to be pretty much the same except for the use while charging and the long battery time. Also the ease of the draw, stock stems works great with the unit.
Those of you considering getting the PVHES glass mouthpieces and you have ordered a new model Solo and haven't gotten it yet. IMO I would wait to see if you even need the PVHES mouthpieces. The ease of the draw is sooooooo good.
Good Times
Those of you considering getting the PVHES glass mouthpieces and you have ordered a new model Solo and haven't gotten it yet. IMO I would wait to see if you even need the PVHES mouthpieces. The ease of the draw is sooooooo good.
Good Times
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I've been wanting a sort of shell case for it, not too thick but enough to protect it. Maybe a silicone skin or something? Just don't want it getting scratched up and stuff. Wraps would also be nice, if you remove the screws from the bottom I believe you can detach the metal housing to wrap and cut around, then the cap screws off. I have a silver one and wouldn't mind a matte black or something... lots of wraps and pretty cheap too!
Haymaker94
Member
is there any way you can pick which model type you want your solo to be? or is it kind of a toss up?
When purchasing I mean
When purchasing I mean
king krish
Well-Known Member
What glass are people using with their solo these days?
I have been using a PNWT since i got my solo and want to try something new. What do people recommend?
I have been using a PNWT since i got my solo and want to try something new. What do people recommend?
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I have a sidecar bubbler, a beaker bong with a showerhead, and a small thin oil tube. Love all of them for different reasons.
poonman
Well-Known Member
It def. couldn't hurt to contact the vendor and specify which model # you're looking for .
in my case ;
I'd contacted Randy from Puffitup , and specified , that I wanted the SS bowl and Not the Ceramic bowl . ( 2 1/2 yrs ago )
It was complied with and no issues . I will be doing the same thing with the newer pass thru models , b/c there seems to be a few older models out there still .
got my eye on a "Stemless Honeycomb" from http://glassblowersdirect.com/waterpipes, only $100.
Haymaker94
Member
Is there a significant difference between the SS bowl and the ceramic? I remember reading that the ceramic bowls used to chip, does that still happen? Im a little leaning towards a SS bowl just for the fact that it seems less iffy to me after hearing about that issue, but I know I'd be giving up better quality vapor that would come from a ceramic bowl, no?
al bundy
Vaporist
I don't think they make the ceramic anymore. They're all ss, Even the ceramic one was a ss ,ceramic coated,bowl I believe.
I'm trying to decide on the m107/m1a1 or the pass through, don't like the idea of the battery constantly starting to charge when the heater goes off . I guess I could always just charge and use the Pipes pa for power and treat it like a m107.
I'm trying to decide on the m107/m1a1 or the pass through, don't like the idea of the battery constantly starting to charge when the heater goes off . I guess I could always just charge and use the Pipes pa for power and treat it like a m107.
rayski
Well-Known Member
You're not going to be able to get a new Solo with a ceramic bowl. Maybe used. The bowls have been SS for over two years.
CarolKing
Singer of songs and a vapor connoisseur
No problems with vapor using a stainless steel bowl in the Solo. You get vapor from level 2 and up. I would recommend Puffitup $160 for a new Solo, and they ship internationally. You will get very good after care, that's very important.
I suppose there are some old Solos floating around with the ceramic bowl maybe in far flung areas on Earth, or folks selling secondhand. They discontinued the ceramic bowl some time ago.
Someone was asking about the Solo car charger. You can use and charge at the same time.
I suppose there are some old Solos floating around with the ceramic bowl maybe in far flung areas on Earth, or folks selling secondhand. They discontinued the ceramic bowl some time ago.
Someone was asking about the Solo car charger. You can use and charge at the same time.
Last edited:
ataxian
PALE BLUE DOT
Go for it!
Nice pairing!
Torontoke
Member
i sent it in to vapeworld. they paid for my shipping. they said theyll be fixing or replacing it with a new unit theres multiple issues with it ive even uploaded several videos on youtube. ill share them via pm if you want
For those of you wondering about the outcome of buying a Solo from Vaporseller.com, I just received mine!
I believe I ordered Sunday, and I received it today (Friday). Monday was a holiday so there was no shipping on that day. They send in decently safe, tight packaging by 2-day priority mail for no extra charge (Atleast thats what it says on the package, but I recieved it on Friday). I paid exactly $125, not a penny more or less. It's also the latest M1E1!
Man this thing is sexy in person...
EDIT** Just checked their site again and it's priced $131.99 now.
I believe I ordered Sunday, and I received it today (Friday). Monday was a holiday so there was no shipping on that day. They send in decently safe, tight packaging by 2-day priority mail for no extra charge (Atleast thats what it says on the package, but I recieved it on Friday). I paid exactly $125, not a penny more or less. It's also the latest M1E1!
Man this thing is sexy in person...
EDIT** Just checked their site again and it's priced $131.99 now.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Sweet, $125 for the newest model is one of the best deals I've ever seen on one.
Anyways tonight I hooked up the Solo with my beaker bong, except with tubing and not directly. The hits are smoother this way!
Anyways tonight I hooked up the Solo with my beaker bong, except with tubing and not directly. The hits are smoother this way!
CarolKing
Singer of songs and a vapor connoisseur
That is such a good price $125. I was really tempted, but was afraid using my credit card number. I want to stay tuned to Vaporseller.com to see what kind of company they are. Make sure you keep us updated on their customer service if you need any. Keep your fingers crossed and click your heels 3 times for good luck, hopefully you won't need any customer service.
Have fun with your new toy.
Have fun with your new toy.