Arizer Solo

ataxian · Aug 15, 2013

wootze said:
Hey dood bros and sis's, I did the search, got zip. Somewhere I thought I remember reading that the newest solos run hotter?
Amirite?

OG straight up in a SOLO!

dannomac21 · Aug 15, 2013

Hey guys,

So that o-ring that was sent to me is absolutely phenomenal. I love it. Makes the stems fit so nice.

Is there anywhere I can order a batch of these from? Amazon or something? If someone can show me where, I would greatly appreciate it fellow vapers.

jds32 · Aug 16, 2013

ataxian said:
It's a display for W9 Tech products like the PERSEI and OMNICRON.
The wood does look like Mahogany however is an exotic called PAROTA.

Nice.

I have a 10" disk of mahogany on the lathe now. The idea is to turn it and cut out several dabber holders. Each one should hold 3-4 at about a 7' angle.

fluffhead · Aug 16, 2013

dannomac21 said:
Hey guys,

So that o-ring that was sent to me is absolutely phenomenal. I love it. Makes the stems fit so nice.

Is there anywhere I can order a batch of these from? Amazon or something? If someone can show me where, I would greatly appreciate it fellow vapers.

http://www.planetvape.ca/solo-high-temp-silicone-o-rings.html

dannomac21 · Aug 16, 2013

fluffhead said:
http://www.planetvape.ca/solo-high-temp-silicone-o-rings.html

Thank you kind sir!

So I see need to place an order for more than $10. If I'm just using the basic stem and Solo right now, what ONE accessory would you guys order from that site?

Dreamerr · Aug 16, 2013

You can't order just one thing...PA, Gong, PVHES
You can get orings at mcmasters and some other place I can't remember. Just get high temp, I think they are to 450 degrees, and number 113 IIRC. Search for OF's posts on this matter and it will have the link and answer to double check me.

fluffhead · Aug 16, 2013

dannomac21 said:
Thank you kind sir!

So I see need to place an order for more than $10. If I'm just using the basic stem and Solo right now, what ONE accessory would you guys order from that site?

From my experience between PVHES or Gong I personally would choose the Gong because it can still be used as a stem dry. I prefer the airflow on the PVHES and Gong but others are more than happy with the stock stem.

As for the PA, I suggest you look back over the last bunch of pages of the thread and you might be able to find a better option out there if it is still available.

dannomac21 · Aug 16, 2013

fluffhead said:
From my experience between PVHES or Gong I personally would choose the Gong because it can still be used as a stem dry. I prefer the airflow on the PVHES and Gong but others are more than happy with the stock stem.

As for the PA, I suggest you look back over the last bunch of pages of the thread and you might be able to find a better option out there if it is still available.

So forgive me, I'm not too familiar with the accessories and add-ons for the Solo. Is there anything off that site I can get that's just a regular stem? I see you say the gong can work as that, but those are add-ons for another type of stem or what? Sorry if I'm wording this like a moron, I just put my Solo down lol.

And also, what is PA?

OF · Aug 16, 2013

dannomac21 said:
Hey guys,

So that o-ring that was sent to me is absolutely phenomenal. I love it. Makes the stems fit so nice.

Is there anywhere I can order a batch of these from? Amazon or something? If someone can show me where, I would greatly appreciate it fellow vapers.

Yes, as the ever charming (and so often dead right) Dreamer said, M/C sells 'em. That's where I got mine:
http://www.mcmaster.com/#o-rings/=o31eci

The secret words here are "standard size 113, high temperature Silicone rubber rings".

Back at 4/20 I gave out a couple dozen (modest) supplies to Forum Members as my own little private 4/20 celebration and ran my supply out. I split another order with another guy so have some to spare again.

PM me your name and address and I'll mail you a few.

dannomac21 said:
Is there anything off that site I can get that's just a regular stem? I see you say the gong can work as that, but those are add-ons for another type of stem or what? Sorry if I'm wording this like a moron, I just put my Solo down lol.

And also, what is PA?

Planet Vape (and others) sell the factory stems as well as custom High Output and GonG ones. And there's the custom wood ones from Ed. In those cases they substitute for the factory straight or bent one.

PA is a Power Adapter, a scheme for powering your unit from 'wall power' (at least 80% of it....), saving the battery charge for cordless use. The maker sells one (PV carries them), I've suggested a lower price alternative from Jameco 'some of the guys' are quite happy with. I also designed a simple outboard regulator to reduce 12 VDC to about 8 for this function. Pipes and Tim are right now feverishly trying to get those into owner's hands as well.

OF

Erikim · Aug 16, 2013

Hey folks. I was wondering if the arizer warranty is worth waiting for. I can either order a solo from the massdrop, and wait about two weeks for it, or drive out to a local retail shop to pick one up for $119, but I doubt arizer will claim warranty responsibilities.

Any longer term issues with the solos batteries or heating element? I thought the massdrop was a godsend, until I realized how long it would be till they ship it out. I just can't wait any longer! Lol

ataxian · Aug 16, 2013

Erikim said:
Hey folks. I was wondering if the arizer warranty is worth waiting for. I can either order a solo from the massdrop, and wait about two weeks for it, or drive out to a local retail shop to pick one up for $119, but I doubt arizer will claim warranty responsibilities.

Any longer term issues with the solos batteries or heating element? I thought the massdrop was a godsend, until I realized how long it would be till they ship it out. I just can't wait any longer! Lol

For $119? Really? That's cheap!
At that price forget the warranty!

BranFlakes188 · Aug 16, 2013

Erikim said:
Hey folks. I was wondering if the arizer warranty is worth waiting for. I can either order a solo from the massdrop, and wait about two weeks for it, or drive out to a local retail shop to pick one up for $119, but I doubt arizer will claim warranty responsibilities.

Any longer term issues with the solos batteries or heating element? I thought the massdrop was a godsend, until I realized how long it would be till they ship it out. I just can't wait any longer! Lol

Can't help but feel like there's some ulterior motive to this post. But I'll just let it be. If this retail outlet ~~exists~~ is selling Solos for $119... as ataxian said: go for it. I haven't seen it anywhere near that cheap in shops.

ludwig · Aug 16, 2013

Was hesitant about where to buy Solo since it was going to pop up on MassDrop but I was too excited and decided to order one off eBay for 128$ and ended up only 119$ at MassDrop. Lucked out there.

Is it possible to connect a whip over the PVHES Straight Stem and use it as a whip? If so, what size do I need to get the silicon tubing?

clouded vision · Aug 16, 2013

@ludwig the stock stem is 1/2" od

BowChamp · Aug 16, 2013

Does anyone know the best method to scrape the oil off the bent stems? I know you can use isopropyl or boiling milk but I would prefer to scrape it and use it for hash

ataxian · Aug 16, 2013

BowChamp said:
Does anyone know the best method to scrape the oil off the bent stems? I know you can use isopropyl or boiling milk but I would prefer to scrape it and use it for hash

Hey BowChamp:

Just clean it and forget about it!

I have room to talk!
$30 set up!

Dreamerr · Aug 16, 2013

Massdrop belongs in the new thread people. We don't want to hear that and the price is not 119 cause you have to adds shipping FYI which I believe is ten buck so it is 139 so for 160 you get great service from out vendor which would be my choice for 20 bucks more.

Now back to the solo.

BowChamp · Aug 16, 2013

ataxian said:
Hey BowChamp:

Just clean it and forget about it!

I have room to talk!
$30 set up!

-snip-

How could that possibly be a 30 $ setup!

mvapes · Aug 16, 2013

dannomac21 said:
So forgive me, I'm not too familiar with the accessories and add-ons for the Solo. Is there anything off that site I can get that's just a regular stem? I see you say the gong can work as that, but those are add-ons for another type of stem or what? Sorry if I'm wording this like a moron, I just put my Solo down lol.

And also, what is PA?

Hey bud, I don't know if anyones answered you. PA is Penns.....Only kidding - it's a power adapter. What were you referring to as far as the GonG connection? I'm not sure I understand your question.

Snappo · Aug 16, 2013

BowChamp said:
Does anyone know the best method to scrape the oil off the bent stems? I know you can use isopropyl or boiling milk but I would prefer to scrape it and use it for hash

If you're scraping for oil, you're not scraping for hash...are you???
Straight stems u can scrape or use cotton. Bent stems cotton only.
Not really sure what's best for stem scraping. Suggestions welcome! :wave:

mod note: Please avoid back-to-back posts, use Edit instead. Two posts merged.

ataxian · Aug 16, 2013

BowChamp said:
How could that possibly be a 30 $ setup!

Local Smoke Shop!

I said that I was dirt poor!

Works sometimes!

BowChamp · Aug 16, 2013

Snappo said:
If you're scraping for oil, you're not scraping for hash...are you???
Straight stems u can scrape or use cotton. Bent stems cotton only.
Not really sure what's best for stem scraping. Suggestions welcome!

There is a method of making hash where you use stem oil and crumbled abv. The problem I have with using cotton is then all I can do is vape the cotton ball... as far as scraping goes you can use a wooden skewer to break up the oil then shake it out, or use a flathead screwdriver.
@ataxian how much did you pay for that bubbler?! It looks perfect for the solo

Snappo · Aug 16, 2013

BowChamp said:
There is a method of making hash where you use stem oil and crumbled abv.

That really sounds like a good combination! :cheers:

. ABV mixed-in to bulk up the consistency could make for a very Solo friendly cocktail :spliff:

ataxian · Aug 16, 2013

BowChamp said:
@ataxian how much did you pay for that bubbler?! It looks perfect for the solo

I use sherlocks with a ashcatcher the most.
The BLACK LEAF bubbler from PLANET VAPES works with all my vapes.
$69.00!

I want a nice piece of glass however $400 for the one I want would not be financially responsible.
So I have a bunch of cheap glass however it gets the job done!

BowChamp · Aug 16, 2013

vataxian said:
I use sherlocks with a ashcatcher the most.
The BLACK LEAF bubbler from PLANET VAPES works with all my vapes.
$69.00!

I didnt notice it was a ashcatcher, that's a great idea! Do you find that you can get milky rips off it? I was planning to get a fbomb but I might just save a ton of money and go to my lhs to buy a ashcatcher
@Snappo http://fuckcombustion.com/threads/h...-black-hash-using-only-abv-and-vape-oil.9115/ here's the link to what I was talking about

Arizer Solo

PALE BLUE DOT

Account Closed

Well-Known Member

Recovering Idealist

Account Closed

Always in a state of confusion and silliness♀

Recovering Idealist

Account Closed

Well-Known Member

Well-Known Member

PALE BLUE DOT

Active Member

Well-Known Member

Well-Known Member

Member

PALE BLUE DOT

Always in a state of confusion and silliness♀

Member

Scratchin' Glass!

Caveat Emptor - "A Billion People Can Be Wrong!"

PALE BLUE DOT

Member

Caveat Emptor - "A Billion People Can Be Wrong!"

PALE BLUE DOT

Member