Arizer Solo

[ataxian]

Sox since you always reclaim and make hash balls why don't you put that stem in hot chocolate or something for a new experience . I hate when I write run on sentences

 

[Dreamerr]

I will be right over...running ah ah ah I mean wheeling Is that just pressed kief, which is about the only thing I am capable of doing?

Wait that is Oil? How how do you do that...I got so much to learn on that type of stuff if I can do it.

 

[SSVUN~YAH]

Good old Harbor Freight special there...

 

[ataxian]

I will be right over...running ah ah ah I mean wheeling Is that just pressed kief, which is about the only thing I am capable of doing?

Wait that is Oil? How how do you do that...I got so much to learn on that type of stuff if I can do it.

fine grind 0.8 flower
0.25. Keif
0.25 Wax or Oil

Load compression chamber tighten by hand
Torche
turn with tool
Torche
Turn with tool as tight as you are able.
Torche
Let sit at least 18 hour

Start with 0.1 gram and vaporize like HASH..
Adjust you dose!

Before bed I have this to help my insomnia!

You ought to see my EQ whip. I only clean that once in a great while. I run a screw(just a tad smaller than the inner diameter) attached to a wire and drag all that good goo out. I use an electric coffee grinder for my bud which creates quite a bit of keif sticking to the tops and sides.

And here's the tip: Combine these two, it will form an incredable hash ball. The freshest tasting hash ever, reminded me of Lebanese hash from long ago.

As far as buying more vapes, right now I'm looking to buy more accessories and a water tool for the Solo. But I know what you mean, if I had a better income I would be an unbridled collector.

HAVING a SOLO puts you at an advantage. You may want more vaperizers
however think glass and water first!

Good old Harbor Freight special there...

The scale works!

 

[Dr. Soxhlet]

I agree with everything you said up until that quote. How can a plant be handed over to a pharmaceutical company? If Big Pharma could synthesize marijuana with all its essence, don't you think that it would already have been legalized? No Big Pharma can't do it and they and Big Al team up to oppose it b/c they know it's safer, period....

Of course the plant can't be patented but the processes needed to produce extracts can be patented.
The oral spray Sativex is an example.

By the way, before cannabis was made illegal every drug company under the sun including many still in existence had their own version of cannabis extract. See antiquecannabisbook.com for over 2000 examples of cannabis as medicine. Funny only one product was actually smoked. The rest were mostly tinctures for internal use and ointments.

 

[420HazeCandykushkush]

Hi guys i'm waiting on my solo now from ebay http://www.ebay.com/itm/Arizer-Solo...t=LH_DefaultDomain_0&var=&hash=item564d703dbc

So the solo works on US current 110V

I live in europe so here the current is 220V

I asked the vendor if there is any adapter in the package but he replied no you need a step down converter from a local store or from ebay he sells one http://www.ebay.com/itm/Simran-SMF-...ravel_Adapters_Converters&hash=item41737e0e26

i'm doubting about what i need to buy is it a converter like he says or an adapter like this one http://www.planetvape.ca/european-eu-plug-adapter.html

I don't want my solo to go BOOM from the first day


Grtz

 

[m0sh]

Hi guys i'm waiting on my solo now from ebay http://www.ebay.com/itm/Arizer-Solo...t=LH_DefaultDomain_0&var=&hash=item564d703dbc

So the solo works on US current 110V

I live in europe so here the current is 220V

I asked the vendor if there is any adapter in the package but he replied no you need a step down converter from a local store or from ebay he sells one http://www.ebay.com/itm/Simran-SMF-...ravel_Adapters_Converters&hash=item41737e0e26

i'm doubting about what i need to buy is it a converter like he says or an adapter like this one http://www.planetvape.ca/european-eu-plug-adapter.html

I don't want my solo to go BOOM from the first day


Grtz

The solo charger accepts 100-240v
This is a must for all vaporizers IMO, it is time American companies realize this, Arizer were here a while ago...you can simply buy a 1euro plastic adapter plug and charge your solo.

You don't need this adapter,it costs way too much!
and you certainly don't need a stepdown adapter.

Same adapter for 3.61$ - even tho you can get a small plastic for 1 euro for sure.
http://factorymonster.com/product/g...175305;jsessionid=bla2qia2ojgz1jbrijtapuykz?0

 

[420HazeCandykushkush]

http://www.ebay.com/itm/Converter-T...0V-/221138350566?ssPageName=ADME:L:OC:BE:3160

What i thought this is cheap compared to inverter LOL

 

[m0sh]

http://www.ebay.com/itm/Converter-T...0V-/221138350566?ssPageName=ADME:L:OC:BE:3160

What i thought this is cheap compared to inverter LOL

hehe, yep! 1 euro (pound) plug, very very good

 

[420HazeCandykushkush]

Hey what screens do you guys recommand or NO screens???

Example Coarse, standard, medium, fine, x fine, ultra fine??

 

[m0sh]

Hey what screens do you guys recommand or NO screens???

Example Coarse, standard, medium, fine, x fine, ultra fine??

Not sure what I got, but I would go for either fine or x fine.

 

[Krizzle]

My solo has just arrived got to admit this unit feels very solid. I received 2 glass elbow stems and its the M102 model Silver. I also got a free skull shaped grinder which I will donate to bro in law as he collects strange pieces. Is it a 3hr charge initially? I have just packed away my MFLB and cant wait to try this solo out.

 

[jds32]

Not sure what I got, but I would go for either fine or x fine.

What size are the screens from PV? Are they 1/2" (they fit in snugly) or 5/8" (you can dome them), or other?

Is there any reason I can't just buy 100 5/8" steel or brass screens from ebay for $3 and use those? I've been using them so far with no concerns.

 

[way2]

I use 5/8 SS screens domed. I bought 100 but I've only used 1 in 2 months. It doesn't seem to get very dirty. I do not reclaim so I leave the screen in when I soak the stem in iso. I not sure but I think the PV screens sit flat in the stem so they're probably a bit smaller. PV also offers different types of screens from coarse to very fine. They(PV) are pricey compared to amazon screens too (PV) 5 screens $3.95+ shipping (amazon) $3.95+ shipping for 100 screens

 

[m0sh]

What size are the screens from PV? Are they 1/2" (they fit in snugly) or 5/8" (you can dome them), or other?

Is there any reason I can't just buy 100 5/8" steel or brass screens from ebay for $3 and use those? I've been using them so far with no concerns.

I have no idea...I don't use these measurements sorry...
But they fit in nicely and exactly right...I'll might have medium... I prefer a bit more finer but not the tightest(I have tightest tho) since you require much cleaning...the airflow can be stuck for good...

 

[ataxian]

http://www.ebay.com/itm/100-Stainle...705?pt=LH_DefaultDomain_0&hash=item5adfae6039

 

[jds32]

http://www.ebay.com/itm/100-Stainle...705?pt=LH_DefaultDomain_0&hash=item5adfae6039

These 1/2" (13mm) ones fit the glass bowl snugly, correct?

If I want to make a small dome, about 3/32" (2-3mm) tall, I use a 5/8" (16mm) screen, right?

I've been using some 5/8" screen that were around the house and they seem to be perfect. The 1/2" screen that came with the PVHES didn't seem to provide as good of air flow as the 5/8" made into an inverted dome.

I was thinking of purchasing these: http://www.ebay.com/itm/230957809990

jds

 

[clouded vision]

These 1/2" (13mm) ones fit the glass bowl snugly, correct?

If I want to make a small dome, about 3/32" (2-3mm) tall, I use a 5/8" (16mm) screen, right?

I've been using some 5/8" screen that were around the house and they seem to be perfect. The 1/2" screen that came with the PVHES didn't seem to provide as good of air flow as the 5/8" made into an inverted dome.

I was thinking of purchasing these: http://www.ebay.com/itm/230957809990

jds

I laughed at the price and thought it was perfect. I usually just buy screens at my LHS,I think they might be 1" but I like to dome them over the end of a sharpie marker then I trim them so the bottom edge is round, that way you don't end up with 4 corners after its domed and it sits right in the bottom of the bowl

 

[Dr. Soxhlet]

Regarding the teflon washer mod in post 15037. After using the Solo this way for a couple of weeks, the retaining ring is becoming looser anyway. I is obvous I need to try the high temerature "O" ring mod as I assume when squashed down it works similar and in tandom with the retaining ring. Also if you use this as a temporary solution, be sure not to reef it down too far as it will put pressure on the aluminum threads.

 

[Vapingaway818]

After spending a considerable of time waiting for my pinnacle to return to defective reasons. i got tired of waiting to be able to put my wt that i purchased w/ the pinnacle to use. so decided it was time to order the solo after reading this thread for a couple of weeks already i was convinced from all the reviews that the solo used w/ the wt would be a perfect match w/ the wt. so i ordered my solo from planetvape.ca and im just waiting for delivery. i decided to order from them due to a couple of people stating that they have great customer service. so as soon as i receive it i will definitely post pix and vids. thanks again for all the great reviews and tips guys!

 

[lauz]

I read that users find it too dry if you hit it without any water so somebody can help me i live in europe and need a good online shop who sells a good quality glass for my arizer solo and i need one that accept cash on delivery i looked already for mobius bubblers but they don't sell them here in europe

I use mine on the highest temp and actually think its reall easy on the throat

 

[zippobong]

I use mine on the highest temp and actually think its reall easy on the throat

Me too, no harsh even on the highest temps!! I guess the water path should make things smoother, and in the near future i will try to get a water piece, but for now no complains at all, my Solo delivers nice and sweet clouds!!!

 

[rcflo]

This was taken last night. You see how golden it is...yours isn't so I didn't comment but still looks yummy. My goal is to get it soooooooooooooooooo golden you will all be jealous.

To me the oily stem right now is just a game for me to see how oily I can get it.

Right with you Dreamerr!

I've been using my custom GonG only for hydratube sessions on the go (since its so short, the pinnacle WT pretty much sits on the solo, its perfect). At home, I've been building this stock stem up with my bub. The past few days, i've been asking myself if it's time... but keep resisting cleaning it, it's been so long.

Here's some stem porn for you all

and its back side!

Tomorrow morning's chocolate milk is going to be epic. Or I could have a very stony memorial day weekend

 

[lolking]

I broke my planet vape turbo HE GonG the other day, and decided to go with the regular HE GonG this time as turbo is out of stock.
just wanted to say the rubber O ring that the planet vape HE GonG comes with now works damn well.
Very impressed with this innovation.

 

[UnixRasta]

I broke my planet vape turbo HE GonG the other day, and decided to go with the regular HE GonG this time as turbo is out of stock.
just wanted to say the rubber O ring that the planet vape HE GonG comes with now works damn well.
Very impressed with this innovation.

I agree, I did the exact same thing. I got tired of waiting for the Turbo HE GonG and ordered the regular.
That O ring is the best possible modification, along with my ZOB bubbler!