Arizer Solo

[Fever]

You should also be stirring after 4-5 hits.

 

[Sinclue]

I notice a lot of you have the new 106+ models with the SS bowls, anyone still have a ceramic going strong?

M102 ceramic going strong since May '11!
Just added an M106 SS last week.

 

[Pcpvapors]

I notice a lot of you have the new 106+ models with the SS bowls, anyone still have a ceramic going strong?

M102 ceramic going strong since May '11!
Just added an M106 SS last week.

Good to hear, from the vaporpedia page it says that the temperature scale should be the same on the 102 as the 106. Can you confirm?

 

[ru_frothi]

I notice a lot of you have the new 106+ models with the SS bowls, anyone still have a ceramic going strong?

Sure M104 and M106

 

[jambandphan03]

I have these 306 (ecig) drip tips, so I popped one into my stem and it makes a good mouthpiece. I have 3 different colors, two of them fit good in the straight stem and one fit good into the bent stem, so they are not all the exact same size, same also goes for the stem opening, so it is fair to warn you that size varies, and if you only get one, it could possibly not fit right. I found mine here http://shop.nhaler.com/Colored-and-Twisted-306-Drip-Tips-306colordrip.htm I don't know if there is a less expensive source for them out there that will work. I already had them from a while back, just thought I'd share since it works well for me. BTW... I LOVE the SOLO!!

 

[Sinclue]

I notice a lot of you have the new 106+ models with the SS bowls, anyone still have a ceramic going strong?

M102 ceramic going strong since May '11!
Just added an M106 SS last week.

Good to hear, from the vaporpedia page it says that the temperature scale should be the same on the 102 as the 106. Can you confirm?

Seems different, but that may have to do more with heat retention by the ceramic bowl over the SS one.
Usually vape at 3/4 with ceramic and 4/5 with SS.

Where M106 is clearly different is warm up time...approx one minute vs. 2+ for ceramic.

 

[Bon Dog]

I have these 306 (ecig) drip tips, so I popped one into my stem and it makes a good mouthpiece. I have 3 different colors, two of them fit good in the straight stem and one fit good into the bent stem, so they are not all the exact same size, same also goes for the stem opening, so it is fair to warn you that size varies, and if you only get one, it could possibly not fit right. I found mine here http://shop.nhaler.com/Colored-and-Twisted-306-Drip-Tips-306colordrip.htm I don't know if there is a less expensive source for them out there that will work. I already had them from a while back, just thought I'd share since it works well for me. BTW... I LOVE the SOLO!!

http://i.imgur.com/gYVuy.jpg

http://i.imgur.com/e6rcb.jpg

http://i.imgur.com/uUMuS.jpg

Thats really innovative, iv never really liked how wide the end of it was but that looks ace!

 

[Pcpvapors]

M102 ceramic going strong since May '11!
Just added an M106 SS last week.

Good to hear, from the vaporpedia page it says that the temperature scale should be the same on the 102 as the 106. Can you confirm?

Seems different, but that may have to do more with heat retention by the ceramic bowl over the SS one.
Usually vape at 3/4 with ceramic and 4/5 with SS.

Where M106 is clearly different is warm up time...approx one minute vs. 2+ for ceramic.

Thanks for clarifying that for me.

 

[jambandphan03]

Thanks Bon Dog, it seems I get a better draw using them, not sure why that is, maybe the narrow path and the fact that it fits my mouth more comfortably. I just hope it works for other people who decide to try it, since both the stems and the drip tips vary in size from piece to piece. I have 2 more stems ordered, and will test out the other tips I have with them when they get here. After spending all that time and money jacking around with e cigs, I am glad this stuff is useful in other areas.

 

[Bon Dog]

Thanks Bon Dog, it seems I get a better draw using them, not sure why that is, maybe the narrow path and the fact that it fits my mouth more comfortably. I just hope it works for other people who decide to try it, since both the stems and the drip tips vary in size from piece to piece. I have 2 more stems ordered, and will test out the other tips I have with them when they get here. After spending all that time and money jacking around with e cigs, I am glad this stuff is useful in other areas.

how hard would it be to reclaim resin from them... i would imagine that is an airflow coke point and lots of resin will build up like crazy...

 

[jambandphan03]

That has yet to be seen. I have not had my Solo long enough to even brown up the stem. They are plastic, so you make your own call. I imagine a light swipe, careful not to gouge into the plastic would collect a good amount of oil, once it built up.

 

[Bon Dog]

ya iv never actually hit a solo but iv always wondered y its just one big opening .. not tapering or anything like that. i think it should be similar to the tips of whip vapes, it even looks better

 

[Fever]

Can anyone confirm 107's being shipped in Canada? I'm thinkin of putting an order together if anyone is lookin.

 

[ru_frothi]

Can anyone confirm 107's being shipped in Canada? I'm thinkin of putting an order together if anyone is lookin.

planetvape posted they have M107's on their retailer thread here last week

http://www.fuckcombustion.com/viewtopic.php?pid=186652#p186652

 

[VaporNinja]

hey guys I was lucky enough to find a M102 ceramic at my local head shop tonight, quick question, does the top hole on the aluminum body perfectly centered with the heating bowl? mine is a little off centered.. it doesn't seem to affect performance, still getting sweet tasty cloud.

 

[ru_frothi]

hey guys I was lucky enough to find a M102 ceramic at my local head shop tonight, quick question, does the top hole on the aluminum body perfectly centered with the heating bowl? mine is a little off centered.. it doesn't seem to affect performance, still getting sweet tasty cloud.

no, thats one of the factors that controls the tightness of the stems. If anything it helps your stem be tighter I would guess and I think thats a good thing. Enjoy.

 

[ilovebOObs]

the top hole on the metal cap. hmmm i don't think it has any affect at all.

 

[msb241178]

I'm just about to jump on the bandwagon, it seems that since the initial release unit they seemed to of sorted out all the issues i had with the unit. I have found a seller who has the M106 and is willing to be flexible on the customs value, as long as i take full responsibility for it. Hopefully this will fill my portable herb niche.

 

[msb241178]

I have these 306 (ecig) drip tips, so I popped one into my stem and it makes a good mouthpiece. I have 3 different colors, two of them fit good in the straight stem and one fit good into the bent stem, so they are not all the exact same size, same also goes for the stem opening, so it is fair to warn you that size varies, and if you only get one, it could possibly not fit right. I found mine here http://shop.nhaler.com/Colored-and-Twisted-306-Drip-Tips-306colordrip.htm I don't know if there is a less expensive source for them out there that will work. I already had them from a while back, just thought I'd share since it works well for me. BTW... I LOVE the SOLO!!

http://i.imgur.com/gYVuy.jpg

http://i.imgur.com/e6rcb.jpg

http://i.imgur.com/uUMuS.jpg

Just found some nice glass 306 drip tips:

http://www.cloud9vaping.co.uk/epage...ve46fvrnud/Products/B70-54/SubProducts/B70-54-

 

[jambandphan03]

I could not get your link to work, but I did a quick google search on glass 306 drip tips, and the ones that came up looked pretty large. The one I have fits the inner diameter of the stem.

 

[Pcpvapors]

With all these insane milkshot vids, I have no clue how some find the vapor unsatisfying.

 

[VapeWorld]

We contacted Arizer, and this is what Debbie from Arizer had to say about the differences in serial numbers:

Regarding the serial numbers M105, 106, 107 etc.... these are for internal / office use only. All units are the same - no difference.

Nothing has changed in 105, 106, 107 ... those numbers are just for our reference, nothing else. Yes, we made changes from 104 to 105 but that's all.

Hopefully this helps. If anyone needs any other info, let me know, and we'll try to get more answers directly from Arizer.

 

[sessnet]

The Solo is insane. It basically has stopped my search for any other vape.

I am able to carry mine around. Just the solo in my pocket, and a straight stem in one of these (from thermovape):

Although, I would like to find something slimmer, probably a regular cigar case will do...

Anyone else take their Solo to go?

 

[OhTheAgony]

We contacted Arizer, and this is what they had to say about the differences in serial numbers:

Regarding the serial numbers M105, 106, 107 etc.... these are for internal / office use only. All units are the same - no difference.

Nothing has changed in 105, 106, 107 ... those numbers are just for our reference, nothing else. Yes, we made changes from 104 to 105 but that's all.

Hopefully this helps. If anyone needs any other info, let me know, and we'll try to get more answers directly from Arizer.

They lie ^^

Or the people you talked to simply don't know any better, but there are different M105 models out even.

The M105 runs noticeably cooler then earlier and later units (I estimate a 15 degrees (Celsius) at least) and the first of the M105s that came out didn't have the ring above the heater chamber that's meant to keep the stem in place. I guess it's safe to say that there may be other model differences as well they do not care to inform us about, but these are the ones I know of anyway.

Of course you all could have known this if you simply read this thread..others have contacted Arizer before you you know?

 

[ilovebOObs]

The solo is a portable vape, so isn't the point to use it on the go, Haha.
Mine follows me everywhere, I honestly never leave home without it