Anyone water cure for edibles?

Pcloudy

Well-Known Member
I ended up with a 5oz bag of larf and trimmings and am thinking about water curing an ounce or two for edibles to see if it makes my butter/oil a little less fragrant. Anyone try this technique for edibles before?
 

shredder

Well-Known Member
I ended up with a 5oz bag of larf and trimmings and am thinking about water curing an ounce or two for edibles to see if it makes my butter/oil a little less fragrant. Anyone try this technique for edibles before?

I've water cured outside grown plants by dipping them in clean water.

I know that the dirty water shows it does work, but since I made concentrates it's hard to say how much difference it made.
 
shredder,

AGBeer

Lost in Thought
100%
I always (except this latest time) do a water cure before I cook with it. I use a french press and change the water daily until it runs clear.
Sandwich the buds between 2 coffee filters and tape it to a fan to dry it out.

WCing is the answer to eliminate the taste.
 

hoptimum

Well-Known Member
100%
I always (except this latest time) do a water cure before I cook with it. I use a french press and change the water daily until it runs clear.
Sandwich the buds between 2 coffee filters and tape it to a fan to dry it out.

WCing is the answer to eliminate the taste.
You don’t need to wait a day between plunges. I simply plunge, wait an hour, and plunge again. Repeat until nearly clear. You can do it in a few hours
 

840_divided_by_two

Well-Known Member
Nope because I once added water to my decarbed bud, coconut oil, and soy lecithin mixture and destroyed a whole batch once... also I don't mind the taste of terpy edibles :) Reminds me that it's infused if I forget lol
 
840_divided_by_two,

tgvp

Well-Known Member
I do that with my ABV and rosin pucks. The first wash after an hour, next one a little bit longer (just check the color of the water) then 1 a day for about 4 days then I dry the batch in the open oven with door open at 80°c max for 1 or 2 hours before cooking it in coconut oil for hours. I really enjoy the improved taste
 

Old Moderate

Well-Known Member
Any one try water curing after de-carbing? It might help too, but I’ve never tried it. Thinking it would be a bit like water curing ABV.
 
Old Moderate,
  • Like
Reactions: shredder

tgvp

Well-Known Member
Any one try water curing after de-carbing? It might help too, but I’ve never tried it. Thinking it would be a bit like water curing ABV.
When you dry it in the oven after water curing, it believe it does the decarb at the same time, so I don't think doing a decarb before is needed
 

Old Moderate

Well-Known Member
When you dry it in the oven after water curing, it believe it does the decarb at the same time, so I don't think doing a decarb before is needed
I was wondering though if it would further decrease the taste to water cure after decarbing as well. I guess I can give it a try next time and see…
 
Old Moderate,
  • Like
Reactions: tgvp

Hookahhead_MD

Well-Known Member
Accessory Maker
I don’t have any experience with water curing. However, I “wash” my butter. I typically make butter with the crock pot method. After refrigerating and collecting the butter, I remelt the chunk of butter in a fresh batch of hot water give it a good stir. This cleans a lot of the green color and taste from the butter.
 

RxPlorer

Well-Known Member
I don’t have any experience with water curing. However, I “wash” my butter. I typically make butter with the crock pot method. After refrigerating and collecting the butter, I remelt the chunk of butter in a fresh batch of hot water give it a good stir. This cleans a lot of the green color and taste from the butter.
That's a method I've never heard of before. Do you skim the chlorophyll off the top or something?
 
RxPlorer,

Hookahhead_MD

Well-Known Member
Accessory Maker
That's a method I've never heard of before. Do you skim the chlorophyll off the top or something?
The chlorophyll goes into the water.

I use my large crock pot. Typically add like 1.75 liter of water, 2 sticks of butter and an oz of shake/trim/abv. Turn it on high and let it cook for an hour or 2, turn it off and let it cool. I strain this through a metal mesh strainer and try to squeeze out as much liquid as possible. This goes into a 2L plastic pitcher and into the fridge. The butter floats and the sediment settles to the bottom. The next day I run a butter knife around the outside edge of the butter and lift out the chunk of green solidified butter. The nasty water goes into the garden or compost. Melt the butter with a fresh 1.5L of hot water. I typically do this step on the stove because it only takes a few minutes. Allow it to cool and refrigerate again to solidify. Now the butter is much less green, and cookies made from the butter taste great.
 

kendon

Well-Known Member
Beeswax is cleared similarly. In general you'd want your stuff to solidify as slowly as pssible, this way all the stuff has more time to settle to the bottom. When clearing beeswax the crockpot is often packed in insulating material (like old blankets), to slow down the cooling/solidifying process).
 
kendon,

Legitchase

New Member
I was wondering though if it would further decrease the taste to water cure after decarbing as well. I guess I can give it a try next time and see…
Hey did you try water curing your decarbed weed? I came to Google to find out and stumbled across this post haha.
 
Legitchase,

HalfBee

Half Buzzed
This season I've water cured my ABV and the difference was amazing... no nasty taste/smell and have used it with and without the plant matter.
Have moved on to big bag 'o trim and the question I have is...

Do I need to remove the seeds (quite a few) before I water cure?

Will the seeds start the sprout process? Will that affect the final product?
Will it be a malting like in brewing with a release of growth enzymes?

Am I overthinking it...
 

AGBeer

Lost in Thought
This season I've water cured my ABV and the difference was amazing... no nasty taste/smell and have used it with and without the plant matter.
Have moved on to big bag 'o trim and the question I have is...

Do I need to remove the seeds (quite a few) before I water cure?

Will the seeds start the sprout process? Will that affect the final product?
Will it be a malting like in brewing with a release of growth enzymes?

Am I overthinking it...
I personally would remove the seeds - but the question begs, why do you have seeds to begin with?
Did you stumble across some Mexibrick from the 80s/90s?
 

HalfBee

Half Buzzed
I thought 'Big Bag 'o Trim' was self evident. Lots of leaves, VERY dry, seedy as all get out, not well cared for after they took out the nice colas.
Main reason it's all going to edibles (most all, still vaping for quality control purposes). Have about a half pound in total, processed 2 batches so far with a third that is still soaking for the next run.

Been meaning to write up my exploits in butter craft, but still working on it...
 

HalfBee

Half Buzzed
To answer my own question above, if you water treat seedy buds 7 days in water - They will start sprouting. Can't tell if this has any affect on how it is used, but will go back to picking the buds clean of beans and enjoying the finger hash results...
 

AGBeer

Lost in Thought
I thought 'Big Bag 'o Trim' was self evident. Lots of leaves, VERY dry, seedy as all get out, not well cared for after they took out the nice colas.
Main reason it's all going to edibles (most all, still vaping for quality control purposes). Have about a half pound in total, processed 2 batches so far with a third that is still soaking for the next run.

Been meaning to write up my exploits in butter craft, but still working on it...
I did an experiment a while back called "From schwag to not bad?" where I had a good amount of trash that I watercured.

The first thing I noticed post WC is how incredibly smooth it was in my vape. Hell, I think I even blasted some of it through my Supreme at the time.
Good shit.
 
AGBeer,
Top Bottom