BeeSawd
Well-Known Member
Just got mine and I gotta say I agree!
Anvil by Vestratto
- Thread starter PlanetHaze
- Start date
Vape_Or_Die420
Well-Known Member
Just saw this interesting new product on Sneaky Pete’s site
www.sneakypetestore.com
Magnet Ring For Anvil
Removing the chamber of a Vestratto Anvil while it’s hot can be dangerous, the Magnet Ring for Anvil solves this problem permanently with a whimsical design.
Last edited:
Comfortably Numb
Well-Known Member
Heck with it....I ordered one...I will hang it around my neck....I am friggen tired of messing with the " Hot Swap Cap " that comes with the case for the Anvil. It really needs a serious redesign. Only complaint I have....the Anvil rocks!!!
That thing is cute, but I assumed everyone just used the magnet in their grinder.
FROMTHE6IX
Well-Known Member
ANVIL and Reload from madheaters work wonders, also for more ANVIL pics check out this Instagram @TheHighShinobi
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Wow i was working on smth similar myself, and thought i post a DIY thread one of these days. A laser etch to the magnets would be greatJust saw this interesting new product on Sneaky Pete’s site
Magnet Ring For Anvil
Removing the chamber of a Vestratto Anvil while it’s hot can be dangerous, the Magnet Ring for Anvil solves this problem permanently with a whimsical design.
. A flower of life pattern or smth geometrical in the vein of it. It is funny how the universal stream of ideas work .
Last edited:
thegame310
Active Member
The magnet on my UFO induction heater works really well with my anvil. Works great for unscrewing the bowl while it’s still hot.
bossman
Gentleman Of Leisure
Just saw this interesting new product on Sneaky Pete’s site
Magnet Ring For Anvil
Removing the chamber of a Vestratto Anvil while it’s hot can be dangerous, the Magnet Ring for Anvil solves this problem permanently with a whimsical design.
Wow i was working on smth similar myself, and thought i post a DIY thread one of these days. A laser etch to the magnets would be great
I got a two pack of these for $9
So tried it last night with my wife and it was pretty cool, but wasn't blown away like I wanted to be. Couldn't get it to fully extract in the first heat up though (RTL). My honest single/triple flame torches also seemed to be way too weak as well. Bowl is smaller than expected. Hoping for better results tonight.
Also wish I didn't get the case and just got the revolve debowler piece. The case cap really isn't that amazing for reloading.
Also wish I didn't get the case and just got the revolve debowler piece. The case cap really isn't that amazing for reloading.
Justpassedu
Well-Known Member
Packed mine up for the 1st time last night , using a regular single flame small torch with half open airflow , heated the 1st copper ring and packed the oven full . I got one big hit , followed by another medium sized hit and was done . I could not get anymore , I still have to experiment and learn a bit more . I did use it outside and it was somewhat cold and windy so I am sure that may have a factor . After 1 hit the bowl and top copper started to change color , take a look at the 2nd image . I also did expect the bowl to be a bit larger . So happy to have one in my hands and can’t wait to use it more when time prevails. I was definitely feeling the effects .
*** my goal is to eventually be able to get 10+ hits like @Whiff in one packing
*** my goal is to eventually be able to get 10+ hits like @Whiff in one packing
Last edited:
Vape_Or_Die420
Well-Known Member
I experimented yesterday with torching the top ring and got nothing but whispy vapor and strong terps. Never had such a terpy hit, stung the nostrils. Hit it a second time on the bottom and got strong vapor but the terps were completely robbed already.
So far I like using a single flame honest torch with a 1/2 inch flame on the thermal battery. It’s not hot enough to ride the line but vapor production is amazing and the flavor is still solid.
Still haven’t figured out what air flow I like, definitely somewhere around mostly open
So far I like using a single flame honest torch with a 1/2 inch flame on the thermal battery. It’s not hot enough to ride the line but vapor production is amazing and the flavor is still solid.
Still haven’t figured out what air flow I like, definitely somewhere around mostly open
Last edited:
thegame310
Active Member
I RTL with my tiny Eagle single flame torch and it takes 55ish seconds but it’s 100% full 1 hit extraction.
And this is dark dark brown? Where exactly are you heating it? Best I've gotten is medium brownish, and I like to take it as close as possible. Ideally getting 2 fat hits out of the bowl would be nice since my wife and I vape together
55 sec will give a tobacco brown and 35 sec will give dark brown, you need to be around 30-35 sec to get close to riding the line...i like to keep it around 35 sec at that point the AVB is like a dark coffee bean
If you have a smaller lower powered pocket torch that CANT get the thermal battery to click in 30-35 sec (ie. Honest single flame, Jabon single flame ) i recommend these heating times (note: you will not be able to RTL)
Dark roast/Thermal battery = 45-50 sec (great vapour production with great flav)
My Fav Med roast/Center oven = 35-40 sec (good vapour production with great flav)
light roast/Top ring = 25-30 sec (less vapor production with amazing flav)
If you CAN get the thermal battery to click in 30-35 sec (ie. Blazer firefox ) i would recommend these heating times
Ride the line (RTL)/Thermal battery = 30-35 sec (great vapor production with minimal flav)
Medium roast/Center oven = 20-25 sec (Great vapor production with great flav)
My Favlight roast/Top ring = 10-20 sec (Good vapour production with amazing flav)
Clapped_r6
bass in your face
Whiff speaks the troof
Thanks for this. Where exactly is the spot for the thermal battery? I think I know, but just want to be sure55 sec will give a tobacco brown and 35 sec will give dark brown, you need to be around 30-35 sec to get close to riding the line...i like to keep it around 35 sec at that point the AVB is like a dark coffee bean
If you have a smaller lower powered pocket torch that CANT get the thermal battery to click in 30-35 sec (ie. Honest single flame, Jabon single flame ) i recommend these heating times (note: you will not be able to RTL)
Dark roast/Thermal battery = 45-50 sec (great vapour production with great flav)
Med roast/Center oven = 35-40 sec (good vapour production with great flav)
light roast/Top ring = 25-30 sec (less vapor production with amazing flav)
If you CAN get the thermal battery to click in 30-35 sec (ie. Blazer firefox ) i would recommend these heating times
Ride the line (RTL)/Thermal battery = 30-35 sec (great vapor production with minimal flav)
Medium roast/Center oven = 20-25 sec (Great vapor production with great flav)
light roast/Top ring = 10-20 sec (Good vapour production with amazing flav)
No problem...i have a pic on my ig with the heating spots but you can pretty much heat wherever you want. Some people enjoy heating the little gap ontop of the battery
www.instagram.com
Just got it and will be using it tonight. Wondering if the case for the Anvil is at all heat resistant? Like, is it safe to put the anvil in the case right after using it or do you have to wait for it to cool down? Afraid of melting the case tbh lol.
This crossed my mind partly because the magnet is surrounded by the case material and I'm not sure if it's safe for example to put the Anvil on the magnet and then lay the vape on it's side to cool down for a couple minutes (where it would be inevitably laying on the case material while cooling). Or is the magnet on the case mainly just for unscrewing the chamber?
This crossed my mind partly because the magnet is surrounded by the case material and I'm not sure if it's safe for example to put the Anvil on the magnet and then lay the vape on it's side to cool down for a couple minutes (where it would be inevitably laying on the case material while cooling). Or is the magnet on the case mainly just for unscrewing the chamber?
androponic
vaped.
totally safe, and the utility case is aluminum.
jasp3r
Well-Known Member
Yup! Totally safe. In fact John desgined it with purpose of taking a hit on the go and shoivng it right back into the tube