AirVape Legacy Pro

Medivapequeen

Well-Known Member
high all,

I see lots of big rips, huge clouds comments. I used a vapman and dynavap omni xl , which should give a notion of how I enjoy my greens. Safe to assume on demand would be mode of choice for my usage.

packing bowl, from my used devices its takes very little green. can I put such a small amount into this vape and not have issues? firstly would be extract well? and second would it lead to more mess?

I ask this as I see many saying how messy it is.

which leads to perhaps my biggest concern and head scratcher. nobody is talking about what exactly is in the air path, yeah i get there is a glass section. so what about the section BEFORE and AFTER the glass? what are the materials. and how on earth would a user go about cleaning those sections of the air path?

see lots of stuff being on the screen beside the bowl, so after that screen and before the glass how to clean it and how easy/hard will that be? this applies to the path after glass to the mouthpiece, how to clean what what is in that path?

being able to get this thing clean along the WHOLE airpath is quite important. please advise and discuss.

to be clear not after clouds, 1 , 2 or 3 hits is usually max I do.

perhaps this device will not excel for my usage pattern like current vapes..

for those that may ask, I am looking to not have to torch light the device as I currently do, hoping to get something that I can just get a hit when i want one and put it away.
I have an OG mighty that just isn't doing it for me anymore and I'm considering an airvape legacy pro but all the talk of messyness is worrying me. I've always wanted a firewood so something similar would be great.

Edit I didn't mean to reply I was asking how the legacy pro performs compared to the OG mighty?

Any plans on making dosing caps for the Pro?
Just wanted to ask you as you may know but how does it compare to an OG mighty? I'm looking for a replacement portable and this looks very interesting.

Well after reading the thread I've gone and ordered one in the UK instead of another OG mighty, Hopefully I've made the right decision! although I can't find the wpa for it anywhere?
 

lauri melissa

Happy Fairy
Greetings to all! This vaporizer is a revelation. I can wax poetic about it, but it is not perfect…..but, pretty close. I love the option for session and on-demand. Once you get what buttons to push, it is rather easy to switch my choices. The heater may not be calibrated accurately, I find it does run hot. My answer to that, is to adjust my stepping temperatures. I start at 300F-325F-350F-375F. So, this is one flaw and it is not that much of a problem to make waves about. Filling the bowl is messy and I hope the new device will deliver on cleaning up that problem. The mouthpiece is a concern. It is not stable because of the smaller silicone gasket. This is definitely fixable. The power is incredible and it punches. Final verdict:
I really like this Legacy Pro. It has become my daily driver, along with the Healthy Rips Rogue. Understand, I am using it for medical reasons. It better work or I have wasted my time and money. And I will not be taking pain medication. It was my choice to use cannabis for PTSD-C, depression, anxiety disorders, permanent spinal injuries and neuropathy due to nerve damage. A good vaporizer is worth it’s weight in relief. Peace and love to all.✌️❤️
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
believe there is a misunderstanding.

I am assuming (benefit of doubt) that what he meant was find a simpler device to use to clean? Maybe device was the wrong word?

No, I actually think you are the one misunderstanding, seems pretty clear that the AirVape rep was telling them to look for a simpler device to clean, like their XS model as rep said, instead of buying the LP...

Also by the way we're not supposed to post back to back here, you can edit your post, and you can collect quotes on the bottom left, and insert them into your post together on the bottom left, if you want to reply to multiple people in one post :tup:
 

Stone__Man

Well-Known Member
can anyone share photos of the "hole" area's of the vapor path? as in below and above the glass tube? and the exit at top below the mouthpiece?

with reps reference to using dental pics I am assuming the openings to be rather quite small.

can you see into the holes/openings? with reps reluctance to tell us what materials are in that vapor path I am fearing its plastic and very hard to try to get cleaned out of gunk.

I don't mean to come across of overly critical , I have serious interest to purchase this vape, and for me its a lot of money so i choose to make the most informed decisions on purchases that I can.

appreciate your time any one that can help.
 

kapows

Well-Known Member
can anyone share photos of the "hole" area's of the vapor path? as in below and above the glass tube? and the exit at top below the mouthpiece?

with reps reference to using dental pics I am assuming the openings to be rather quite small.

can you see into the holes/openings? with reps reluctance to tell us what materials are in that vapor path I am fearing its plastic and very hard to try to get cleaned out of gunk.

I don't mean to come across of overly critical , I have serious interest to purchase this vape, and for me its a lot of money so i choose to make the most informed decisions on purchases that I can.

appreciate your time any one that can help.
Source : Google

I uploaded some shots from the web. When my unit arrives i can take extra but that'll be like 21 days lol

The herb gets cooked in the oven and the hot air is pulled through the vent you see in the same pic. As you draw air, (airholes on the bottom of the device) it takes the hot air through the glass.



Its unclear what material your breath passes through and unclear what material the vaped air passes through.



Its quite possible the air you breathe in and the vapor is pulled in silicone or plastic or at a certain point maybe both before it hits the glass


 
Last edited:

sickmanfraud

Well-Known Member
3-5 days US, 5-7 Europe

I got lucky it took 3 weeks to get to Israel.

For the first 2 weeks, the package was meandering around the USA. Only took a week from an international flight to in my hand.
the battery that comes with a PRO is 3200mAh, and the OG Legacy is 3000mAh, but you can use any 18650 battery, just the warranty will be gone.

The supplied battery is a protected cell. Are you saying that we don't need to use protected cells?
 
sickmanfraud,

Medivapequeen

Well-Known Member
I got mine today from magicvaporizers and gotta say so far I'm impressed. Seems to out perform my OG mighty so I'm happy. Time will tell how easy it is to keep clean but the chamber is ridiculously easy to clean. I'm in the UK and cannot find a WPA anywhere though.
 

Okla68

Well-Known Member
I got mine today from magicvaporizers and gotta say so far I'm impressed. Seems to out perform my OG mighty so I'm happy. Time will tell how easy it is to keep clean but the chamber is ridiculously easy to clean. I'm in the UK and cannot find a WPA anywhere though.
Same one that is for the Airvape X ! Flat to fit mouthpiece on one end and a round 10/14/18 step on the other.
I use mine on both to Extend the Airpath length.
 

kapows

Well-Known Member
I got mine today from magicvaporizers and gotta say so far I'm impressed. Seems to out perform my OG mighty so I'm happy. Time will tell how easy it is to keep clean but the chamber is ridiculously easy to clean. I'm in the UK and cannot find a WPA anywhere though.
How comes you didnt go via airvape? Plus MV were showing it oos for ages..mustve got it back in.

You enjoying it? Biggest peeve?
 

Medivapequeen

Well-Known Member
Same one that is for the Airvape X ! Flat to fit mouthpiece on one end and a round 10/14/18 step on the other.
I use mine on both to Extend the Airpath length.

Thank you I didn't know the same one fits they didn't have the wpa in stock at magic vaporizers but I didn't look at the X doh

How comes you didnt go via airvape? Plus MV were showing it oos for ages..mustve got it back in.

You enjoying it? Biggest peeve?

I couldn't find a shipping option to the UK and in the end wanted protection from a UK seller incase anything goes wrong or it was faulty as I've had US products before and it's been a bit of a nightmare for shipping etc.

I'm really enjoying it! The mighty is harsh over 200 for me but I can easily sip concentrates on this with no water needed at 240C which I love. I've only been using it a day so far so I'm still in the honeymoon phase admittedly. I'll come back in a few more days to give a proper opinion although I will say I've shelved my mighty for now. I had a good few bowls on the one battery yesterday and I love how easier it fits in my bag. Only pet peeve so far is no physical manual as I like to have a good read but I'm old school lol

WPA listed here,

Thanks I'm trying to find it from a UK site if possible.
 

kapows

Well-Known Member
Thank you I didn't know the same one fits they didn't have the wpa in stock at magic vaporizers but I didn't look at the X doh



I couldn't find a shipping option to the UK and in the end wanted protection from a UK seller incase anything goes wrong or it was faulty as I've had US products before and it's been a bit of a nightmare for shipping etc.

I'm really enjoying it! The mighty is harsh over 200 for me but I can easily sip concentrates on this with no water needed at 240C which I love. I've only been using it a day so far so I'm still in the honeymoon phase admittedly. I'll come back in a few more days to give a proper opinion although I will say I've shelved my mighty for now. I had a good few bowls on the one battery yesterday and I love how easier it fits in my bag. Only pet peeve so far is no physical manual as I like to have a good read but I'm old school lol



Thanks I'm trying to find it from a UK site if possible.




Only 1 left
 

sickmanfraud

Well-Known Member
Same one that is for the Airvape X ! Flat to fit mouthpiece on one end and a round 10/14/18 step on the other.
I use mine on both to Extend the Airpath length.

I personally would be afraid to put any strain on the current mouthpieces.

I can "see" it falling off the bubbler and smashing the bubbler.

Once the replacement mouthpieces are available the WPA may be a possibility.
 

Medivapequeen

Well-Known Member



Only 1 left

Thanks! Wish I'd bloody seen it at the time!
I personally would be afraid to put any strain on the current mouthpieces.

I can "see" it falling off the bubbler and smashing the bubbler.

Once the replacement mouthpieces are available the WPA may be a possibility.

I thought the original x mouthpieces fit more snugly than the current ones. I agree the I wouldn't put any pressure on the mouthpiece that comes with the pro as it bends off very easily. I'd be wanting something steady for my megaglobe. Is the original wpa as snug a fit as the original mouthpieces? It may not move then.
 
Medivapequeen,
  • Like
Reactions: LesPlenty

sickmanfraud

Well-Known Member
I got lucky it took 3 weeks to get to Israel.

For the first 2 weeks, the package was meandering around the USA. Only took a week from an international flight to in my hand.


The supplied battery is a protected cell. Are you saying that we don't need to use protected cells?

I just looked. The cell is a regualr 18650. I saw the pin coming from the top and assumed, wrongly, that it was a button top. Sorry if I caused anyone any problems.
 
sickmanfraud,
  • Like
Reactions: LesPlenty

RxPlorer

Well-Known Member
I finally tried some rosin on the concentrate pad today.

Put an 1/8" dab of cbg/cbd on session mode at 320f. It took 2 long draws before vapor was finally being produced but the flavor was great. Kept pumping out clouds for the rest of the session and I'm guessing it's probably less than half gone at this point being at such a low temp. Clean terpy flavor, dense but very comfortable vapor.

Count me impressed at how versatile this device is. It's turning out to be a good choice for an OTG medical workhorse.
 

Medivapequeen

Well-Known Member
I finally tried some rosin on the concentrate pad today.

Put an 1/8" dab of cbg/cbd on session mode at 320f. It took 2 long draws before vapor was finally being produced but the flavor was great. Kept pumping out clouds for the rest of the session and I'm guessing it's probably less than half gone at this point being at such a low temp. Clean terpy flavor, dense but very comfortable vapor.

Count me impressed at how versatile this device is. It's turning out to be a good choice for an OTG medical workhorse.
Agreed, I tried some gelato CBD crumble at 240c flavour was lovely and the hits were still cool. I haven't used my mighty now in 2 days. I usually have buyers remorse around this point but nope!
 

MagnumMafia05

Well-Known Member
Is there a way to get notifications sent to me for a thread/page? I ordered this yesterday and just found this forum out and definitely want to try dosage caps if they come out for this.
 
Top Bottom