2clicker
Observer
its all good mang. i need a couple for my aerotank anyway.
2clicker's vapor emporium
- Thread starter 2clicker
- Start date
its all good mang. i need a couple for my aerotank anyway.
thats cool. where did you find that? I would love to find something like that... if it could hold a little moisture even better!picked up a new drip tip for the igo-w.
I think im just gonna grab one of these
http://www.steammonkey.com/mobile/Product.aspx?ProductCode=UAMP-ADJTT
it turns the kanger aerotank into a dripper. I didnt originally find it... someone here on fc posted it in another thread. I cant remember who so credit to them... but I revisited and asked if it fit the mini. he daid the threadings right it just looks odd... (I figure it looks like one of those honey stiring stick things lol)
I like yhe airflow of the mini and for now it suits me ok. so I would be down for custom areotank heads @2clicker
1 thing I noted about the new sealed heads... if you turn the shield upside down so the wick isnt exposed to the holes it doesnt leak out on the deck as much... if at all... I think I just have some residual puddle from when I installed it initally.
im already using it dripper style.
http://www.steammonkey.com/mobile/Product.aspx?ProductCode=UAMP-ADJTT
it turns the kanger aerotank into a dripper. I didnt originally find it... someone here on fc posted it in another thread. I cant remember who so credit to them... but I revisited and asked if it fit the mini. he daid the threadings right it just looks odd... (I figure it looks like one of those honey stiring stick things lol)
I like yhe airflow of the mini and for now it suits me ok. so I would be down for custom areotank heads @2clicker
1 thing I noted about the new sealed heads... if you turn the shield upside down so the wick isnt exposed to the holes it doesnt leak out on the deck as much... if at all... I think I just have some residual puddle from when I installed it initally.
im already using it dripper style.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Hi that was me
Lemme know how you like it if you do get it, I haven't tried one myself personally as I have a few setups for oil (both for home and on the go) and my actual dripper atomizers are too small for a pancake/DBC. Plus with two drippers I don't really need the aerodripper 
Hi that was me
see I knew eventually that would get sorted out. so yes thank you. I am still trying to decide... a little bigger coil wouldnt hurt either though. the aero in drip mode is a mess cause I invert it alot to put it on glass pieces.I think a diffrent shape coil would help too in the aero heads for dripping. I have a couple ideas, just no rba materials.
Last edited:
2clicker
Observer
I think a diffrent shape coil would help too in the aero heads for dripping. I have a couple ideas, just no rba materials.
that coil you posted a pic of earlier... obviously smaller to fit in the kanger heads, but if you could make a coiled coil (ha) i think that would absorb a large dab and as long as you hit the heat for a sec or two the oil will absorb into the RXW. then you are good to go upside down w/out a mess.
think about the coil fitting snuggly in the head. the lead coming off the top end could go right down the middle. basically just filling the head with wire and RXW.
basically the pos end woud come strait up the center and then coil around itself back down for neg. with the coil inside the rxw like you have been showing was what I was thinking...
im fairly certain half my mess issue is cause im afrade to give it heat cause I taste the scortch if I do... I blame the sillica wick!
sweet thank you!
3 DBCs and rebuild kit arrived and loaded...
The extra room afforded by the set screws is very useful, but I think I am still going to end up with an aftermarket top for the igo-w very soon. Initial impression is very good, I will update after further testing.
Thanks 2clicker!!!
The extra room afforded by the set screws is very useful, but I think I am still going to end up with an aftermarket top for the igo-w very soon. Initial impression is very good, I will update after further testing.
Thanks 2clicker!!!
2clicker
Observer
3 DBCs and rebuild kit arrived and loaded...
The extra room afforded by the set screws is very useful, but I think I am still going to end up with an aftermarket top for the igo-w very soon. Initial impression is very good, I will update after further testing.
Thanks 2clicker!!!
yes my HALO cap provides a tad more room than my stock igo-L cal does.
enjoy!
kingtut106
Well-Known Member
I'm not sure if we are supposed to post here for order requests, but I pm'ed you as well. I was interested in getting the 3 pack of 1 ohm diamondback coils.
2clicker
Observer
public service announcement... im out of RXW and need some wire as well. it may be a few days before i can get to any new orders.
@kingtut106, yep i got your PM and reply sent.
@kingtut106, yep i got your PM and reply sent.
2clicker
Observer
each one is a tad different. id say 3/8 is pretty close. im pretty sure i could make them in dif diameters if needed.
2clicker
Observer
just wanted to thank everyone for the kind words via PM and for the orders.
im ordering more wick today and should be building again later this week.
also, new stuff coming (i know ive said that before, but im for real). i have been having a hard time locating some materials, but i will have a new coil hopefully before the end of the year. this requires custom machined parts. thats why its taking so long.
im ordering more wick today and should be building again later this week.
also, new stuff coming (i know ive said that before, but im for real). i have been having a hard time locating some materials, but i will have a new coil hopefully before the end of the year. this requires custom machined parts. thats why its taking so long.
AnthoFranco
Well-Known Member
i am glad i found this thread.
plotting my orders and planning a couple of builds.
gonna try out that EJMix as well. (that clearomizer is gonna be another adventure)
i get way ahead of myself. i got to get tools 1st.
so many places to shop. seem most have the same thing.
popping my KISS NiCh 3.7 brought me out of the W-9 thread.
i dont know if that is good or bad for them.
plotting my orders and planning a couple of builds.
gonna try out that EJMix as well. (that clearomizer is gonna be another adventure)
i get way ahead of myself. i got to get tools 1st.
so many places to shop. seem most have the same thing.
popping my KISS NiCh 3.7 brought me out of the W-9 thread.
i dont know if that is good or bad for them.
AnthoFranco
Well-Known Member
well, i did order a kiss globe and a 601 battery to 510 atty adapter, so im sure ill get more up tech product.
AnthoFranco
Well-Known Member
dude that patina is awesome!
will it continue to patina with use/handling? or once chemicals removed it stops.
ive been looking @ a few different tobeco rda's. tobeco seem's a little nicer than some less expensive clones.
and because of that, i may purchase a tobeco mechanical mod.
anyway, have a good week.
will it continue to patina with use/handling? or once chemicals removed it stops.
ive been looking @ a few different tobeco rda's. tobeco seem's a little nicer than some less expensive clones.
and because of that, i may purchase a tobeco mechanical mod.
anyway, have a good week.
2clicker
Observer
yes patina will continue to develop if not sealed. i sealed this in a matte finish wheel coating. hopefully its durable.
best thing with patina is that if you dont like it... you can easily sand it off and redo it.
i may get a few more copper Primes and patina them. then offer them in here.
also, i should have "rigs" or kits for sale soon. these will include mod, RDA, coils, batteries, and charger. all kits will have 5 DBC coils w/ one pre-installed.
@OldOyler... the wire should arrive today so your kit should be ready very soon!
best thing with patina is that if you dont like it... you can easily sand it off and redo it.
i may get a few more copper Primes and patina them. then offer them in here.
also, i should have "rigs" or kits for sale soon. these will include mod, RDA, coils, batteries, and charger. all kits will have 5 DBC coils w/ one pre-installed.
@OldOyler... the wire should arrive today so your kit should be ready very soon!
OldOyler
Fire it again. I can still find the ground.
@matthend ,
NNNOOOOOOO! They are out of stock!
:-)
Seriously, I AM getting one as soon as they are available!
@2clicker how did I not realize this thread was here...D'oh!
Sounds good, I'm pumped! That custom rig kit idea is was a lifesaver for me. I have enough to make my head hurt *already*. I really do appreciate your extra attention to all your materials, too.
And getting everything from you, in one setup, and not having to deal with any shady suppliers?
Priceless.
Peace!