Search results

Those are Machining marks/surface finish that you're talking about. That is normal and it's likely that they have changed cutters and tool paths for better cycle times on their parts while still maintaining an acceptable surface finish. The smoother you want the metal to be, the more passes you...

Those look like plier or vice marks to me, as though it had to be gripped firmly and pulled out of something. They are not machine marks and don't even look like chuck jaw marks. I would contact Dynavap.

The sharp edges on the fins and the top edge of the tip are definitely micro dented and rough with mine, it glitters, and looks and feels uneven. It really could have used a ceramic stone wash to remove all the sharp edges and smooth out the irregularities. The mouth piece also has burs on the...

I've finally received my LE 7 fin tip and to be honest I'm not too impressed. The biggest issue is the cap fitment, which is too loose when I use the cap I have designated for discolouration. I like to use one cap between all my vapcaps and keep the other cap I have clean for pictures. If I were...

I think what's happening is the extra force from the magnets is flexing the discs so they click sooner. I don't think there's enough force to deform the discs permanently and any magnetism in the discs would be negligible. In other words don't worry about it. I use extremely strong magnets and...

impatience and over reaction much? When did you send these emails? Over the weekend? Directly email Joew@dynavap.com He's part of CS for dynavap. Did you squeeze the cap to make it fit tighter? You never mentioned if you did. From the Dynavap FAQ: "MY CAP IS TOO LOOSE OR WON'T STAY ON MY...

I have a zap strap around mine because it has the same issue.

I agree that they're making it more dramatic than it is if you're careful. It's most likely to happen when fine particles are produced. I agree, another option I can think of is drilling a small hole in the other side and pushing the magnet out. Usually the soft Birch toothpick compresses down...

This is the bigger concern when there's flammable dust around the workshop, also it's very hard on the drill bit. What can and has happened to me is that the filings can pile up/stick together THEN catch fire and normally it's after you're done working and walk away.

Drilling rare earth magnets is a bad idea. They’re brittle, hard, pyrophoric, and ceramic. I’m not sure why we’re talking about removing the magnet in the first place? Also to repair screw holes you want to fill the hole with a tooth pick and wood glue. I personally hate Gorilla glue because...

I prefer my Mouth piece on the right, screen facing me and my Mighty in my right hand.

I didn't realize there was so much to threads either until I worked as a junior manager at a high end CNC machine shop making drill strings. The threads are actually quite complex where the drill pipes connect together. I just ran a pin gently through the roots of my threads, you would be...

I've never really solved it and I typically use all the methods you do. What I do is get a q-tip with ISO and I will push it hard into the threads and then drag it around and around. This tends to get the deepest into the thread and down to the root. I've had a small Ti 4 pc for years and the...

Really? I find that 365*F/185*C on my unit is just right to make the flavour last through the whole session. Though I don't use the capsules so I'm not sure how they effect conduction. It could be that the herb that is in contact with the metal is heating up faster than the rest of the load and...

Mirroring my post in the cheap HQ bubbler thread, I just ordered a pair of these from Sunshinestore on DHgate. I'm going to make a stubby vapcap to match and hopefully have a neat little bubbler rig. They shipped today! And an 45 and 90 degree version of this Ash catcher

Do you mean the digger tool on the bottom? I hardly use the little thing and highly recommend never using it as a stand. The Mighty is unstable when you stand it on the tool and will fall over very easily. @Ratchett makes an awesome 3d printed stand and other accessories for the Mighty that I...

You're comparing a massive international company (Walmart) that has existed for years, has their own distribution and transport services, and is one of the largest stores in north america, to a small company that has existed for a few years and has one facility and a small team of people. Apples...

I picked up a few ash catchers and J-hooks from Sunshinestore on DHgate. The J-hooks came as a pair so I decided to get both 45 degree and 90 degree ash catchers to make a hammer style bubbler or hook up to my other water pieces. This is mainly to use a tiny bit of water to cool down my vapcaps...

Nothing, I was looking at getting Dynavap stuff but got screwed with the site crashing. Edit: most of the items were "wants" and not "needs" but it was still quite frustrating. I also looked at getting some glass but ultimately couldn't find anything that really caught my eye. It was an odd...

@InterplanetaryTanner hooked me up with the coarse plate I have for my GR8TR Vape so I can't say for sure what the OE Kannastor plate will do. It makes for a pretty consistent medium-fine grind which my Herbalizer seems to love because it improves air flow. Left is the Fine plate, Right is the...