Bassman999
Well-Known Member
Ive been away a while and not up to date.
I gave away my e-nail, and looks like you can make one with that but maybe not a safe one.
-
SCAM WARNING! See how this scam works in Classifieds.
I gave away my e-nail, and looks like you can make one with that but maybe not a safe one.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Ah this is the thread you want although it has gotten quite big somewhere there is a list of everything available I think but you can also read details about each and see use:
**Ball vape comparison megathread** Compare your balls.
For reasons unsaid I am just observing. But it seems all ball vapes are updating and lower prices ang great sales but it seams that no one is mentioned a vape or a website that I updated and prices seems a bit lower to me but not sure have sales going on
fuckcombustion.com
Bassman999
Well-Known Member
TY gonna check it out
lazylathe
Almost there...
Thread here to keep you amused for a very long time!!
Thread '**Ball vape comparison megathread** Compare your balls.' https://fuckcombustion.com/threads/ball-vape-comparison-megathread-compare-your-balls.52970/
ondemander
Well-Known Member
There one posted in the classified for over $400. There was one on Entexchange.org a couple weeks ago without the sled for $160. They are fairly rare.
Bassman999
Well-Known Member
I ended up just ordering an SS Zeal kit pre-order for $125
coolbreeze
Well-Known Member
Hi all, I was fortunate to recieve a G43 with the mod cable and while I have a mod on the way, I'd also like to set it up for the mains as well. My understanding is that a VVPS will run it fine and rather than cutting off the ability to connect it to the mod, I'd like to have both capabilities. My plan is to wire up a female barrel plug to a battery adapter so I can go straight into the vvps by plugging into the adapter:
First, is this sound? It seems functionally the same as Kenny's hardwired barrel plug. Secondly, how do I determine which of the wires should attach to which terminal (terminals are marked)? I can follow Bud's wiring from the plug to the coil, I think. Should the leg be the negative terminal and the coil positive? Does it matter? Third, can anyone share experiences doing this, especially with a vvps like the Woodscents'? Voltage level, etc?
Fourth: any additional warnings or anything I should be aware of? I'm a total n00b here, just trying to logic this all out.
Thanks. Humbly accepting thoughts and prayers. ; )
First, is this sound? It seems functionally the same as Kenny's hardwired barrel plug. Secondly, how do I determine which of the wires should attach to which terminal (terminals are marked)? I can follow Bud's wiring from the plug to the coil, I think. Should the leg be the negative terminal and the coil positive? Does it matter? Third, can anyone share experiences doing this, especially with a vvps like the Woodscents'? Voltage level, etc?
Fourth: any additional warnings or anything I should be aware of? I'm a total n00b here, just trying to logic this all out.
Thanks. Humbly accepting thoughts and prayers. ; )
Last edited:
I don't know anything about mods but I don't think the wiring really matter... this is a basic resistor in this vape. You can wire it either way and it will heat up.
coolbreeze
Well-Known Member
Thank you!
warren0728
Well-Known Member
i think 4 volts is a good starting point with the vvps ... i run both my g43s around 4-4.5 ... and remember it gets pretty damn hot!Hi all, I was fortunate to recieve a G43 with the mod cable and while I have a mod on the way, I'd also like to set it up for the mains as well. My understanding is that a VVPS will run it fine and rather than cutting off the ability to connect it to the mod, I'd like to have both capabilities. My plan is to wire up a female barrel plug to a battery adapter so I can go straight into the vvps by plugging into the adapter:
Third, can anyone share experiences doing this, especially with a vvps like the Woodscents'? Voltage level, etc?
Fourth: any additional warnings or anything I should be aware of? I'm a total n00b here, just trying to logic this all out.
Thanks. Humbly accepting thoughts and prayers. ; )
coolbreeze
Well-Known Member
Thank you! Are you connecting through the sled?
warren0728
Well-Known Member
i don't have a sled version ... i have an og mod version and a ruby wall (vvps) version but i have an adapter for the mod version to run it through a vvps instead (like you are trying to do) ... so i can use either g43 as a mod version or a wall version
coolbreeze
Well-Known Member
ah, I don't think I've seen a ruby wall version. The mod version is the female half of the cable with clips or a barrel plug iiuc? I've got more catching up to do!
Hippie
Well-Known Member
You want a power supply that that will go upto 5A > a PWM (step down convertor) > a JST SM 2 pin (2.5mm) connector
The JST SM 2 pin (2.5mm) connectors aren't very good connectors tho to be quite honest so when I connect my G43s n things to a mod the resistance is different each time
So you're probably best off removing the JST SM 2 pin (2.5mm) connectors and replacing them with better connectors
The JST SM 2 pin (2.5mm) connectors aren't very good connectors tho to be quite honest so when I connect my G43s n things to a mod the resistance is different each time
So you're probably best off removing the JST SM 2 pin (2.5mm) connectors and replacing them with better connectors
Last edited:
coolbreeze
Well-Known Member
Thank you! What would be a better connector?
coolbreeze
Well-Known Member
The adapter and plug parts came so I assembled and tried them out. First, this is a really sweet vape, I feel fortunate. The stand is so handy that it's half the joy. Second, everything seems to work really well at about 4-4.2V (so far); I'm using the 5a VVPS that came with my Vapbong. The connections are slightly warm but only noticeably. I'll have to think about a more permanent solution; I'd rather not have to rewire the cable to use the mod, but I will probably mostly use this plugged in.
GlassWindows
Well-Known Member
Coming back?
Hey bros,
I had some parts left and started building these again, slowly. Sent out a few dozen over the last 2 months, have enough components to build a few more. The latest units have a barrel connector for use with a wall adapter.
Currently sourcing parts for a possible next iteration that will have some upgrades. Keeping the sled functionality will be challenging so I'm leaning towards the new version being a plug-in, but still considering all options.
Miss you bro! Hope you're doing well
I had some parts left and started building these again, slowly. Sent out a few dozen over the last 2 months, have enough components to build a few more. The latest units have a barrel connector for use with a wall adapter.
Currently sourcing parts for a possible next iteration that will have some upgrades. Keeping the sled functionality will be challenging so I'm leaning towards the new version being a plug-in, but still considering all options.
Miss you bro! Hope you're doing well
ChasinTerps
New Member
Hi bud, sounds interestingHey bros,
I had some parts left and started building these again, slowly. Sent out a few dozen over the last 2 months, have enough components to build a few more. The latest units have a barrel connector for use with a wall adapter.
Currently sourcing parts for a possible next iteration that will have some upgrades. Keeping the sled functionality will be challenging so I'm leaning towards the new version being a plug-in, but still considering all options.
Miss you bro! Hope you're doing well
How much is one of these great g43s? Do you ship overseas? (Sorry in case this was already mentioned before
)Will the v2 come in 2025? Or is it too early for thinking about a date?
AJS
Calm Consistency
This is exciting. The G43 is a beast of a vape.
It's probably the best price to strength ratio of any vape I've purchased.
At the price I got the original, it really was one of those launches that makes you rethink the price you pay for other vapes.
Hopefully it'll still hit that "budget vape" territory.