Ernielicous
Well-Known Member
have always loved this rig brother, such a cool design! i bet the metal portion at the bottom cools the vapor wonderfully.
-
SCAM WARNING! See how this scam works in Classifieds.
Thermal Accumulator by phattpiggie
- Thread starter Custom Flower Hardware
- Start date
BushRanger
Hit It & Quit It
Hey, do you use the original coil screw in Flare?
I have ordered custom one from piggie, that is taller than original.
Meanwhile I tried inserting coil screw from Yll IH on top of the screw from Flare, and like the results a lot more now when the TA4 head is higher while heating.
Last edited:
BushRanger
Hit It & Quit It
TA4 high in the clouds...
Fearless Disaster
Well-Known Member
you and i have similar tastes! my 11mm stem is in the mail, i already have the scruffy stand. plus we both have the HA donut pipesTA4 high in the clouds...
BushRanger
Hit It & Quit It
@Fearless Disaster can recommend that leather pocket for stand...very handy. 
It's amazing how this thing shreds thru some old-school hash...40 mesh screen in bowl, thin layer of hemp fibre, a good sprinkle of hash bites, Tempest bowl screen on top to seal it. (think screens are same, 40 one and from Tempest)
Changing top screen with every bowl.
It's amazing how this thing shreds thru some old-school hash...40 mesh screen in bowl, thin layer of hemp fibre, a good sprinkle of hash bites, Tempest bowl screen on top to seal it. (think screens are same, 40 one and from Tempest)
Changing top screen with every bowl.
Last edited:
How do you enjoy the @Aezhenn stem with the TA?@Fearless Disaster can recommend that leather pocket for stand...very handy.
It's amazing how this thing shreds thru some old-school hash...40 mesh screen in bowl, thin layer of hemp fibre, a good sprinkle of hash bites, Tempest bowl screen on top to seal it. (think screens are same, 40 one and from Tempest)
Changing top screen with every bowl.
BushRanger
Hit It & Quit It
tasticleeze
Steward of the Garage
Does Mr piggie have an e-store? I’m very interested in a ribbed wooden wpa that I’ve seen on the awesome cfh videos.
Loving the ta3 with an hmk millie - thanks to this board for guiding me so well even before I started posting
Loving the ta3 with an hmk millie - thanks to this board for guiding me so well even before I started posting
Fearless Disaster
Well-Known Member
I’m cant wait to get mine! @BushRanger we both picked the two tone amboya burl
Seantagon
Well-Known Member
PhattPiggie's Wood Shed
VGoodiez is a small family owned business and home of the heavies. We also specialize in hand crafted artisan vaporizers and accessories from around the world. Getting the Good stuff was never so EZ! Thanks for supporting small business!
BushRanger
Hit It & Quit It
Karadji GreenSea
Free for choose, slave to consequences
That was a long session !
Are you using the boro glass beads or something else?
Ive just got the TA3, Im loving it, never combusted yet now im wondering about the ruby beads...may it keep more heat = longer sesh...somebody knows?
Cool video mate!
BushRanger
Hit It & Quit It
It was with 3mm zirconium beads, that's why the heat time was longer also.
I'm still running the boro balls in my TA3. With a pipita torch (beefier flame than the Firefox) and heating straight with the core of the flame it cherry in about 20 seconds.
I sometimes feel that I need a second, shorter heat up to get a more complete extraction, but HR wise that's mostly strain dependent.
Would switching to a denser thermal matrix (corundum or zirconia) help with that ?
I have the airflow disc half open and a straight boro stem with absolutely no restriction if that matters.
Or maybe should I pull harder ?
I sometimes feel that I need a second, shorter heat up to get a more complete extraction, but HR wise that's mostly strain dependent.
Would switching to a denser thermal matrix (corundum or zirconia) help with that ?
I have the airflow disc half open and a straight boro stem with absolutely no restriction if that matters.
Or maybe should I pull harder ?
BushRanger
Hit It & Quit It
Switching to zirconia felt like a nice upgrade, especially with full bowl.
Boro might come more handy with half bowl, and when using torch only, due to faster heat up.
Boro might come more handy with half bowl, and when using torch only, due to faster heat up.
BushRanger
Hit It & Quit It
Clapped_r6
bass in your face
Hell ya. Forge settings and depth?
TedJones
Well-Known Member
Yea that’s a sweet combo @BushRanger 
BushRanger
Hit It & Quit It
@Clapped_r6 still trying different configurations, in the last video I had too low depth for my liking, so I'm now at screw being flush with wheel or few threads up. 5400-5600J@90-95%, TA4 filled with zirc.
tasticleeze
Steward of the Garage
I stuffed my ta4 with rubies the size of tangerines Mr Wayne …
it does keep heat for a while (and takes over a min to heat in the flare), but I also feel like I’ve extracted a whole lot earlier than that heat is needed and the flavor can almost be overwhelmed with hot air.
Still tinkering!
Karadji GreenSea
Free for choose, slave to consequences
Thank you mate.That sounds exactly what Im aiming for but I will wait for the TA4 be back to the market and then I will get the rubies with it.
I like to vape with the TA as a joint so most of the time MTL with very short air flow, my idea is give short hits but with dense smoke(cause its really hot) really close to combust but If I recognize that started burn the top of the bowl I just close all air few seconds and then keep vaping huge clouds.
Also big Thanks to @ScruffyWoofers,
amazing stem, at the begining felt bit long but the trade off with the heat sink it made it worth and also feels like a cigar on the hand with great balance of weight in the middle.
Can the flare users recommend their wattage and timings for the TA3? My sessions have been iffy with the wand so I have swapped over to the flare/torch but haven't dialed in the wattage/timing quite yet. 105W for 45 seconds offered some nice vapor but I definitely could have gone back in for a reheat. Overall have really been enjoying the TA overall, very forgiving for a butane vape without indicators.