FROLIC by Limelight Herb

[fog0nthetyne]

Just ran it at 180 with a 0.05G load in the bowl, worked perfectly fine, visible vapour on first toke after 5 seconds to hit temp. Only difference I noticed is that the bowl was spent quicker and the clouds weren’t quite as thick. It was done after about 2 and a half minutes. Will try 0.05G in on demand mode later and see if it can clear it in one pull but I’d imagine it will do

 

[Sativapo]

Just ran it at 180 with a 0.05G load in the bowl, worked perfectly fine, visible vapour on first toke after 5 seconds to hit temp. Only difference I noticed is that the bowl was spent quicker and the clouds weren’t quite as thick. It was done after about 2 and a half minutes. Will try 0.05G in on demand mode later and see if it can clear it in one pull but I’d imagine it will do

Nice ! I don't know if you like finishing at high temps, but can you try you to get that quantity even dark brown at 220 ?

 

[SolidAirrr]

thanks for the testing and reporting @fog0nthetyne
Sounds like everything (I) expected is fulfilled from the Frolic so far, and like the coining of a VentyxTM2's kid is really kinda justified.

 

[fog0nthetyne]

Nice ! I don't know if you like finishing at high temps, but can you try you to get that quantity even dark brown at 220 ?

Yes because that’s exactly what I did lol - turned it up to 220 at the end for one big rip to see her off

thanks for the testing and reporting @fog0nthetyne
Sounds like everything (I) expected is fulfilled from the Frolic so far, and like the coining of a VentyxTM2's kid is really kinda justified.

No worries but imo I would wait for @NorthernHigh420 to drop some content cause I can see he’s got his in hand now and he’s a far superior voice than me with loads more vapes to be able to give you all good comparisons with! I’ve just been trying to do what I can until his landed

 

[TigoleBitties]

Wow. Reading all this stuff is exciting because it's exactly what I thought this vape could be. A powerhouse that hits like the TB2 with that instant-on heater, but it's more portable and has a removable battery. The fact that this guy can also do session mode is a very nice bonus.

I can see this vape maybe getting people to switch from carts just because of the sheer speed and all-in-one simplicity. Probably hits like a brick too.

 

[fog0nthetyne]

Wow. Reading all this stuff is exciting because it's exactly what I thought this vape could be. A powerhouse that hits like the TB2 with that instant-on heater, but it's more portable and has a removable battery. The fact that this guy can also do session mode is a very nice bonus.

I can see this vape maybe getting people to switch from carts just because of the sheer speed and all-in-one simplicity. Probably hits like a brick too.

Still can’t get over the 5 second heat up on session mode, stuff of dreams. It does hit like a brick… I took it on my evening walk last night and had to stop and rest on a bench on the way back because I was significantly more baked than I was expecting to be

 

[TigoleBitties]

Still can’t get over the 5 second heat up on session mode, stuff of dreams. It does hit like a brick… I took it on my evening walk last night and had to stop and rest on a bench on the way back because I was significantly more baked than I was expecting to be

Yeah the speed is a game-changer. Makes it really hard to go back to anything slower. I learned this after getting my TB2.

The fact that it cools well and has tasty vapor elevates it even more. Then add in great battery life with replaceable batteries. Very nice.

 

[SolidAirrr]

this vape maybe getting people to switch from carts

Could you elaborate on this?
What I've also thought about and what hasn't been reported or really addressed is how deals with hash/concentrates. Should be one of the best battery portables for that too, right?
A s&b mesh thing should fit perfectly, I guess...
Did I just answer my question to you, TigoleBitties? (:

 

[TigoleBitties]

Could you elaborate on this?
What I've also thought about and what hasn't been reported or really addressed is how deals with hash/concentrates. Should be one of the best battery portables for that too, right?
A s&b mesh thing should fit perfectly, I guess...
Did I just answer my question to you, TigoleBitties? (:

Lol. Yes I think you're right. The heater sounds powerful enough to handle most anything. Also, since it supports a session mode you can have that constant high heat that you need for some concentrates.

From what I remember though, I think the on-demand mode can hit 240C max which will probably also work well.

 

[MrJitterz]

Canadian here too. Do you know for sure whether it's better *not* to use the US warehouse?
No love yet with respect to invoicing

Looked at Troy's video and his review looks promising for what I'd hoped this unit would perform like.

Edit: Just got the link and sent payment! Yay!

Mine was shipped today requesting the other warehouse. I don't know if it's better perse as I may need to wait on shipping longer. Just trying not to risk getting hit with Tariffs or supporting anything USA in general.

 

[NorthernHigh420]

I have two videos going up on my insta soon but this thing rips. Initial impressions I wouldn’t have a problem recommending it. Need more testing but passes the sniff test

 

[fog0nthetyne]

Cloud clip 180°, full bowl, fully open airflow, session mode and this was third toke on that bowl I think

 

[Dejan LimelightHerb]

Sorry guys, hard to follow up on everything today.

This will probably get buried, but anyway:

1. Some units went out without the main oven oring being lubed. We used food grade silicone paste, but you can use cooking oil or anything similar. Sorry about this.
2. Really interested in the initial smell of the devices, the cleaning and burning off process is consistent but again, it may vary a bit from unit to unit, so looking for feedback if we could better thus aspect with a longer self cleaning sequence.

Everything else should be mint but do let me know if you need anything.

P.S. Invoices are going out slowly, we should complete them all over the weekend and complete shipping next week. Sorry about the delay and thank you for your patience, getting there

 

[NorthernHigh420]

I have videos up now id post them here but doesn’t seem to work

 

[HumbleLivings]

I have videos up now id post them here but doesn’t seem to work

it worked for me

 

[NorthernHigh420]

 

[NorthernHigh420]

it worked for me

Worked with youtube tried insta first time

 

[HumbleLivings]

Worked with youtube tried insta first time

yeah with ig your link just takes you to your ig page and I saw the video there
with youtube you are able to see it here,
how you liking the frolic bro

 

[NorthernHigh420]

yeah with ig your link just takes you to your ig page and I saw the video there
with youtube you are able to see it here,
how you liking the frolic bro

So far so good, airflows nice and open lots of power. Little like a venty and a TM2 in a good way. Looks great in person something I haven’t said about plastic before. Build quality is on point the battery could be hard to access if you have fat fingers but threads are nice so it does spin pretty easily with one finger.

 

[Dejan LimelightHerb]

So far so good, airflows nice and open lots of power. Little like a venty and a TM2 in a good way. Looks great in person something I haven’t said about plastic before. Build quality is on point the battery could be hard to access if you have fat fingers but threads are nice so it does spin pretty easily with one finger.

The mouthpiece doubles as a battery cap removal tool, take the mouthpiece off and take a look at the bottom side, it has a slot which acts as a tool for the battery cap removal.

Did I really not mention this anywhere?

Well, Easter egg it is then!

 

[forbin0227]

If I had slowed down, I would have realized I could have saved another 10% by ordering here vs from the site earlier today lol whoops. Super excited to get one of these guys in my hand!

 

[HumbleLivings]

So far so good, airflows nice and open lots of power. Little like a venty and a TM2 in a good way. Looks great in person something I haven’t said about plastic before. Build quality is on point the battery could be hard to access if you have fat fingers but threads are nice so it does spin pretty easily with one finger.

yeah this frolic looks promising, I sold my venty and TM2 I was considering maybe re-buying the TM2 but now I am leaning more towards this Frolic
the only con that I think I heard someone say about this frolic is that the bowl is made out of Aluminum, is that true?

how is the flavor and how is on demand mode on this frolic?

If I had slowed down, I would have realized I could have saved another 10% by ordering here vs from the site earlier today lol whoops. Super excited to get one of these guys in my hand!

is there a coupon code to save 10% on the frolic or a special link for the discount?

 

[dude_de]

I could have saved another 10% by ordering here vs from the site earlier today

I'm sure @Dejan LimelightHerb can get you that discount as he has done for others. He's a good guy!

 

[NorthernHigh420]

The mouthpiece doubles as a battery cap removal tool, take the mouthpiece off and take a look at the bottom side, it has a slot which acts as a tool for the battery cap removal.

Did I really not mention this anywhere?

You may have, i’ll try showing it in some videos. Getting some huge rips on water with it right now

 

[JH12]

If I had slowed down, I would have realized I could have saved another 10% by ordering here vs from the site earlier today lol whoops. Super excited to get one of these guys in my hand!

I did the same thing. Placed my order on the site earlier today, didn't realize the option to order from here was available. This is definitely one of my most anticipated vapes. Early impressions and reviews seem very promising.