-
SCAM WARNING! See how this scam works in Classifieds.
AirVape Legacy Pro / AVLP 2
- Thread starter JohnJacobs
- Start date
vapeaspirant
New Member
Yeah that's the one i'm talking about, am i not right to be worried about them show casing a dirty/damaged unit on their own yt page? Please tell me i'm not just imagining that stuff.....
EDIT: Nevermind, i no longer care, after all the disingenuous replies and hate i got from commenting on that youtube video. I no longer want anything to do with this company. I'll be looking around for something else. I hope everyone gets a good product, but from what they've showed on the youtube video and from reactions to my questions in the comments about it <from which i can no longer comment on> i'll ask for a refund, again in email. Then i'm charging back
Just to be clear gary, before i leave this thread. That did no address my issue at all. I was asking for tarrifs, i thought obviously through context ...US....and you start talking about VAT. That is a very clever non-answer. Good day sir.
Last edited:
Sorry, but I don't see what the company has to do with youtube comments? Like, I think it is fair to criticies the points your named (even though it is super normal for silicone to attract dust), but it's not like youtube commenters are the employees of the company
vapeaspirant
New Member
They kept saying stuff about "pre production show models" and then they started deleting my comments and theirs. I'm not sure how youtube works, but i don't think non hateful posts dissapear unless the people who posted the video delete them?
I did make this account here when i pre-ordered this vape from a user on another site i visit often showed the link. I came here when i saw a company rep is on this fourm, so i asked a quesiton about tarrifs, got a response about VAT and got concerned so i started to look harder.
No, commenters said that. That are simple users like you and me. That were not comments from the company accounts.
But yes, it seems they deleted your comment.
vapeaspirant
New Member
No to be clear i deleted that whole thread myself after comments that made me look really bad were deleted. It made the context all wonky. Someone for sure commented to me < in a reply they edited multiple times then deleted..> about why i was going postal about a preproduction unit i have no clue about how far it'd traveled etc.
So to be clear i deleted my original comment, and replaced it with a much more succinctly worded one after context got deleted from the previous one...that someone was deleting comments from, mine included.
Hi,
No one deletes anything
You guys all want to trash the new PRO, come on...
The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
The peek is peek. Yes, it's expensive, but all major vape companies have to use food-grade, pre-approved materials on the vapor path. There is no magic because there is quality control in China! If you want to do good business, you have to follow the rules! China is far more advanced technologically than any Western country... Rules are rules there, no shortcuts to use cheap shit if you are a legit business.
I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
)
And CS answers all emails, I personally check that every week, this is what our company is famous for, the good customer care compared to other vape companies.
And yes, I'm here, reading the thread and writing when I have time.
Don't be so negative, please.
Thanks.
G
No one deletes anything
You guys all want to trash the new PRO, come on... The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
The peek is peek. Yes, it's expensive, but all major vape companies have to use food-grade, pre-approved materials on the vapor path. There is no magic because there is quality control in China! If you want to do good business, you have to follow the rules! China is far more advanced technologically than any Western country... Rules are rules there, no shortcuts to use cheap shit if you are a legit business.
I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
) And CS answers all emails, I personally check that every week, this is what our company is famous for, the good customer care compared to other vape companies.
And yes, I'm here, reading the thread and writing when I have time.
Don't be so negative, please.
Thanks.
G
DitchAnomoly
Member
Hi,
No one deletes anything
The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
The peek is peek. Yes, it's expensive, but all major vape companies have to use food-grade, pre-approved materials on the vapor path. There is no magic because there is quality control in China! If you want to do good business, you have to follow the rules! China is far more advanced technologically than any Western country... Rules are rules there, no shortcuts to use cheap shit if you are a legit business.
I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
And CS answers all emails, I personally check that every week, this is what our company is famous for, the good customer care compared to other vape companies.
And yes, I'm here, reading the thread and writing when I have time.
Don't be so negative, please.
Thanks.
G
Thanks for the replies! It's not all negativity here. There's a lot of interest in this thread. Even the disappointment is borne out of anxious anticipation.
Need to get some restless hands on devices.
NOLOGO
Well-Known Member
Thanks @Gary-Airvape ... I am good with everything you said except that the tariffs are a "media hoax."Hi,
No one deletes anything
The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
The peek is peek. Yes, it's expensive, but all major vape companies have to use food-grade, pre-approved materials on the vapor path. There is no magic because there is quality control in China! If you want to do good business, you have to follow the rules! China is far more advanced technologically than any Western country... Rules are rules there, no shortcuts to use cheap shit if you are a legit business.
I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
And CS answers all emails, I personally check that every week, this is what our company is famous for, the good customer care compared to other vape companies.
And yes, I'm here, reading the thread and writing when I have time.
Don't be so negative, please.
Thanks.
G
Yes, the china imports tariffs wwre lowered for the next 11ish weeks, but it was lowered to approximately 40% instead of the like 150ish it was raised to by the same guy.
If you truly believe that what's being reported is only "media hoax" then I completely understand why you've been giving very short replies before this last one.
And at risk of going off topic (although I'm directly responding to this company rep) please take a look at THIS for some accurate info on the current US/China tariff situation.
Last edited:
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
I just saw the new video ad for the ALP 2...and it looks amazing. I see that the airflow got enhanced...I was not sure but, after seeing the video it verity's it.
Thank you @Gary-Airvape for all the updates, etc. I cannot wait. It looks amazing...Cheers.
DrG
Thank you @Gary-Airvape for all the updates, etc. I cannot wait. It looks amazing...Cheers.
DrG
vapeaspirant
New Member
I haven't been being negative, You've been evasive. I finally did receive an email from CS, today, a month after my initial one and after raising a stink about it. I just wanted answers not evasion. Please do not assign values to legit questions based on your judgment of negative or positive. You're a business.Hi,
No one deletes anything
The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
The peek is peek. Yes, it's expensive, but all major vape companies have to use food-grade, pre-approved materials on the vapor path. There is no magic because there is quality control in China! If you want to do good business, you have to follow the rules! China is far more advanced technologically than any Western country... Rules are rules there, no shortcuts to use cheap shit if you are a legit business.
I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
And CS answers all emails, I personally check that every week, this is what our company is famous for, the good customer care compared to other vape companies.
And yes, I'm here, reading the thread and writing when I have time.
Don't be so negative, please.
Thanks.
G
I mean that's simply not true. I know several companies that were hit by tariffs...Hi,
No one deletes anything
The Tariffs question was not answered because it was not a valid issue, as you might know, nobody applied tariffs from anything from China... Only a little reading around the internet, and you will know this is just a media hoax.
Considering rules are rules and china being technologically advanced is that a confirmation that the AVLP2 will have an actual CE certification?
I mean, if you use advertise a colourful display, it's just weird to not show that in product trailers?I'm so sad to see all this negativity. Do you really think we advertise a colourful display and not deliver? Do you really think we'll ship you a used unit? (the one we used for the video, the only prototype we had to make content, sorry
Also, no one worried about you shipping a used unit. People wondered why the area around the oven looks scratched like that. I expect that from a product that has been used for several months to years. Not a unit used for a trailer. Or do you actually produce only a single prototype and then use that for vaping all the time privately even though you know there are no other prototypes for trailers? I don't get why it would look that used otherwise
Last edited:
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
OMG Gary do you have a headache yet?
Anyway, Gary what kind of grind would you say works best for the ALP?
DrG
airvapeusa.com
NICE VIDEO!
Anyway, Gary what kind of grind would you say works best for the ALP?
DrG
Legacy PRO 2 | Pre-order
Where innovation meets elegance—again. The Legacy PRO 2 is the next evolution of AirVape’s award-winning dry herb vaporizer, taking everything users loved about the original Legacy PRO and enhancing it with smarter design, refined aesthetics, and user-driven upgrades.
NICE VIDEO!
Last edited:
VaporScript
Well-Known Member
***Legacy PRO 2 — Estimated to Ship by Late June
kokolokokolokon
Well-Known Member
Maybe If someone gets a thin long glass tube it can be introduced in the cleaning hole to make an almost straight vaporpath as alternative 
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
Can that actually work?Maybe If someone gets a thin long glass tube it can be introduced in the cleaning hole to make an almost straight vaporpath as alternative
DrG
I was thinking the same @kokolokokolokon . Depends on the size of the pass through hole. Something metal that telescopes out. But then you have the stock mouthpiece hole there, and an abnormally shaped cutout, etc. I would have preferred an entirely different pathway design, less silicone, etc, but I need to take the AVLP2 as it comes.
It's not like they hid this part of the design from me when I ordered.
It's not like they hid this part of the design from me when I ordered.
kokolokokolokon
Well-Known Member
As @maremaresing said: it depends on the size of the pass through hole.
Actually i hope it is not super tiny, since it would make it harder to clean (ironically)
seedy53
Well-Known Member
i think we're ok.As @maremaresing said: it depends on the size of the pass through hole.
Actually i hope it is not super tiny, since it would make it harder to clean (ironically)
TheTerpTimmay
Member
While I applaud the upgrades to the unit and if the quality is as good as my steampunk unit, the pre-order price makes it hard not to want to order one but I still do not like that there are still too many choke points for the vapor. That small "condenser" screen and the dosing disk get clogged up on my unit way too fast and while I see the condenser screen is larger and WAY easier to remove and clean, the unit still looks like it is way too much maintenance for me.
I guess after using the Lobo for over a year and half, with pretty much only a small screen that needs to be cleaned or just tossed and replaced, I am spoiled. Plus I still have issues with the new designed capsules getting the lids in place if pressure is not applied evenly.
The new unit just has not improved enough for me to justify replacing my old unit, but for those who are buying the new Pro2, enjoy.
I guess after using the Lobo for over a year and half, with pretty much only a small screen that needs to be cleaned or just tossed and replaced, I am spoiled. Plus I still have issues with the new designed capsules getting the lids in place if pressure is not applied evenly.
The new unit just has not improved enough for me to justify replacing my old unit, but for those who are buying the new Pro2, enjoy.