Dani Fusion by Battery-free Ganz

RichardsBag

Well-Known Member
Dani Fusion ordered!

Does anyone know if it'll fit in my Jarhead or Cauldron IH? The glass insert looks fairly wide, but I'm reading that only the Ispire wand fits it?
I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
 

TedJones

Well-Known Member
I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
Do you have a Depot or Lowe’s by you? I used to get the medium sized Benzmatic that was my favorite until they stopped. Now they have the Gardner Bender as a replacement and it’s better! Also quieter. I set adjustment a little under half way for a nice 3” blue flame.
 
TedJones,

2pumpchump

Well-Known Member
I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
as the insomniac welder what is your meaning of mid size ? like cargo pocket or backpack size ? also have you tried full purging your current torch or bumping the flame down the flame a bit ? i have had a few that came with the regulator/adjustment set just a bit to high
 
2pumpchump,

Goatts

Well-Known Member
I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
From an insomniac vape chimp; Ronxs dual flame torch (set to single flame) is the torch of choice on my Dani Fusion, v3 & Anvils. $23 on Amazo.ca right now. You can get 3 of them for the price of one Blazer Firefox, second favourite torch for bigger snappin vapes. Haven’t tried on DVs. The Ronxs on single flame setting at about 3/4 inch inner blue flame is very quiet. But I’m going deaf so ..... Go Ronxs 100%
 

nicknobody

Well-Known Member
@Goatts

You’re in Canada? Check out sneaky Pete’s vape white north or something like that. On his USA site Firefox is only $35. Same on simrell collections. Amazon has firefox for $39.99

As for ronxs my dual flame was $13.99 it’s regularly promoted. Rn it’s $14.99 as I’m lookin.

I’m I. Socal if that makes a difference…

I know stuffs more $ up there just tryna help ppl in the states…
 

2pumpchump

Well-Known Member
eagle brand PREAMEM torch at 13 us $ is a good compact . my sole mate is extra quite its a knock off so in sure other brands . pleanty of good opsins from $15 to $40 the size is the mane ?
So I just tried something new with my fusion. I use the ronxs dual torch set on single flame with the center flame about 2 inches. Loosen the cap to where there is a bit of the tip showing. At a 90° angle aim the flame right into the gap. Put the tip of the center flame right up to the gap, rock back and forth for even heating. Ready right at the click

I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
@Wesleypipes as i been doing a Simler method for some reason did not have my singel flame so used the 4 flame rockwell i had in my dash 2 flames on the base and 2 on the cap at about 3/4 inch ---19mm iner flame
 

RichardsBag

Well-Known Member
eagle brand PREAMEM torch at 13 us $ is a good compact . my sole mate is extra quite its a knock off so in sure other brands . pleanty of good opsins from $15 to $40 the size is the mane ?



@Wesleypipes as i been doing a Simler method for some reason did not have my singel flame so used the 4 flame rockwell i had in my dash 2 flames on the base and 2 on the cap at about 3/4 inch ---19mm iner flame
Awesome! thank you. I have been trying different methods and finding them all effective in their own ways. My biggest suggestuion is a bunnch of hardware store magnets. I use them as a heat sink, de - capper and cap rest. At some point id like to get a wiki going with and updateable
'Best heating practices for Dani/Fusion vapes' in the subreddit as well. They are versatile beasts. Today, I swore to the sky i had combusted after a click+ 10.
Instead ,I got a weed milk shake so thick it looked unnatural and tasted great. I dont understand how that works. Ive done the same thing in Dynas and when i cut it that close, it tastes funky even if there isnt any combustion.

There is some kind of magic to this and it provides a lot more leeway for new converts. I really like that aspect of the BFG lineup. Ive had two buddies combust their M's and promptly turned them into chillums or paper weights due to never really seeing what it could do. They were both out of state so I couldnt walk them through it in person and they are stubborn bastards. This isnt to hate on the dynas. I still ues them daily and love them. They are just beasts of a different nature.
 

2pumpchump

Well-Known Member
Awesome! thank you. I have been trying different methods and finding them all effective in their own ways. My biggest suggestuion is a bunnch of hardware store magnets. I use them as a heat sink, de - capper and cap rest. At some point id like to get a wiki going with and updateable
'Best heating practices for Dani/Fusion vapes' in the subreddit as well. They are versatile beasts. Today, I swore to the sky i had combusted after a click+ 10.
Instead ,I got a weed milk shake so thick it looked unnatural and tasted great. I dont understand how that works. Ive done the same thing in Dynas and when i cut it that close, it tastes funky even if there isnt any combustion.

There is some kind of magic to this and it provides a lot more leeway for new converts. I really like that aspect of the BFG lineup. Ive had two buddies combust their M's and promptly turned them into chillums or paper weights due to never really seeing what it could do. They were both out of state so I couldnt walk them through it in person and they are stubborn bastards. This isnt to hate on the dynas. I still ues them daily and love them. They are just beasts of a different nature.
magnets work grate for the fusion and the new IH caps for the v3's im still rocking the old school v3 cap i read the IH caps heat quicker with a torch as well due to the Aloy so a comparison of those would be interesting as well took a bunch of measurements and picks lost phone as soon as i can will post would love to take place as we all have our way of vaping . but to simplify the reason for the affect you decribe comes down to well we going to say 3 things for now lol...
1 MASS yea v3 cap has 2 to 3 grams of difference but that's not really important for this part of the subject as much as it is displaced more even on the fusion vs more tip heavy on the v3
2 when is cold air being heated
3 what is cold air cooling as or before being heated
4 wear .this will be your technique hints wear you heat
5 how this will be how hard the cold air is forced to be heated before passing through your bud
 

2pumpchump

Well-Known Member
I dont thknk it will fit. Some of the VHB units may work if adjusted. Also, FWIW this thing shines with a torch. I use my IH only when the noise is an issue late at night. Speaking of which, can anyone reccomend a good mid size torch that is quiet?

My neighbors likely beleive me a crack conneiseur and/or insomniac welder.
My current smoke shop special works perfectly until it is briefly spouting a foot long geyser of satans fiery breath then settling back to its set flame.
It really keeps me on my toes but if you can believe it, Doc says bursts of terror and accidental immolation are BOTH no good for the blood pressure. I suppose thats just how it is getting old. Time to settle down and find a nice quiet torch. What do you all like for a heavy cap torch?
you never did say what size torch you was looking for also as for noise all factors matter so witch is worse to you high pitch hiss or deep growl ?
to ad to my prier post. got greedy with my angel nicked my wood with my torch but that's not the worse part of it as i have been babying that stem. :mad::mad::mad: also want to ad as even with DYNAVAP and BFG being the 2 vapes im most familiar with hate trying to compare them both are winners but playing different games.

@RichardsBag the real ? is knowing all that info can you adjust #4 to get close to the same affect ?
I bought some 3/8 inch Grade 2 Titanium concave screens from US Amazon to put in my Fusion bowl. It was loose at first but I hammered it flat between two wooden plugs, now it fits like a charm. I love it!


how is the air flow? as in the end as to why i like the v3Ti better all comes down to ...WHEN I CRAM A BOWL FULL the v3ti still breathes better unless i run the screen domed backwards or kicked sideways helps ... but dose matter how much air you can take in if its not going out !
 

Nishno8

Member
you never did say what size torch you was looking for also as for noise all factors matter so witch is worse to you high pitch hiss or deep growl ?
to ad to my prier post. got greedy with my angel nicked my wood with my torch but that's not the worse part of it as i have been babying that stem. :mad::mad::mad: also want to ad as even with DYNAVAP and BFG being the 2 vapes im most familiar with hate trying to compare them both are winners but playing different games.

@RichardsBag the real ? is knowing all that info can you adjust #4 to get close to the same affect ?

how is the air flow? as in the end as to why i like the v3Ti better all comes down to ...WHEN I CRAM A BOWL FULL the v3ti still breathes better unless i run the screen domed backwards or kicked sideways helps ... but dose matter how much air you can take in if its not going out !
I didn't really notice a difference, not sure though. I like open airflow with both holes open, low temp & microdose, so can't say much about a packed bowl. But just from looking at the screen I would actually guess it gives more airflow if anything because the holes are bigger.
 

2pumpchump

Well-Known Member
I didn't really notice a difference, not sure though. I like open airflow with both holes open, low temp & microdose, so can't say much about a packed bowl. But just from looking at the screen I would actually guess it gives more airflow if anything because the holes are bigger.
i as well stay on the lower side of the temp as well and honestly don't mind haveing to reheat as my fusion my edc compact i actually pefrr it .. and as i said that thay was both in the wash as i relised both was so cloged to about a 16 gage hole lol will re side by side tonite
 
2pumpchump,

RichardsBag

Well-Known Member
to ad to my prier post. got greedy with my angel nicked my wood with my torch but that's not the worse part of it as i have been babying that stem. :mad::mad::mad: also want to ad as even with DYNAVAP and BFG being the 2 vapes im most familiar with hate trying to compare them both are winners but playing different games.

@RichardsBag the real ? is knowing all that info can you adjust #4 to get close to the same affect ?
Hey there! As for torch size I’m interested in what’s working well for people. As for the type of noise… I think the lower ones are harder Ti hear it quiet is as quiet does.

I don’t really follow this part of your post. I’m pretty die hard about not only enjoying both dyna and BFG but think we can all get along! I’ve had and shared my issues about dyna during the ‘The Cappening’s pt 1 and 2 but that was about company policy and issues.

I still very much enjoy their stuff. I even like the armored cap (v2) but am still learning the ways of the M+ tip. It’s a new type of deal. Anyways just wanted to clear that up and avoid any ‘cap popping’ contests before they started.

As you said inferred yourself I’ll just add the age old truism:

”Girls don’t care who’s got the biggest, or the most sliver,Ti,gold plate -dripp or even whose got the new TiDra XXL Ti 7 fin with two different collars at once, just because.
She really don’t care about the thicccest, most thermally massive cap you got, even the one you leave out when you know the boys are coming thru.

Nah, Nah, Ya see, the girls, they want a man who can combine a stem, tip, cap AND find the Carb without missing a beat and and the work it to extraction.

These girls want a man with vision and rhythm who brings it to life through his Vap’a cap Cappin’ , his a’ tamping’ and a packin’, the kind of greens he’s racking’ and always remembering not to forget that …..Snap!!…..Snap… oh sh-!’

I’m gonna keep this up for now with the caveat that I had some fairly major Dental yesterday mornin till the afternoon. I woke up and wrote this.
My mouth looks like the they filmed the John wick 4, Tokyo sword duel scene inside of it. I’m loaded to the gills with transdermal cbd/THC and homemade edibles. Anyway it’s bed time for me but sorry for the long yarn. I’ll chop it down when I wake. Had a chuckle and little tune writing it so not all bad eh?
 
Last edited:

2pumpchump

Well-Known Member
it seams like i really need to work on my grammar .... as the face was about my stem and did not finish that story because im waiting for final out come .. i think their is hope :nod:
to make sure it is not misunderstood my commit about the 2 vapes playing different games was intended as a compliment trod both of them !!
sorry if it was taken the other way .
get the filling i did somthing wrong so ill go ahead and put my self in the corner .......might as well polish my wood wile im in time out
 

2pumpchump

Well-Known Member
My mini stem had fallen to pieces. I didn’t come to an agreement with BFG. Please help, I will pay double. I really need this, can’t use my vape like that.

This is so frustrating.
though i ruend mine drop-in iso for what was ment to be a second forgot it their for well IDK 24 to 48 when i rember it wash and dry it was whit as a gost . but i think its all good now was going to rub my wood 1 more time and post pick tomorrow now i feel bad sorry bfg did not come to terms with you before i make any suggestions what part of the globe are you located
 
2pumpchump,

Raphael De La Ghetto

Well-Known Member
Did any of y'all deep clean your Dani Fusion when it arrived? I remember multiple Dynavaps arriving quite filthy and caked in machining oil..
 
Raphael De La Ghetto,

Flow

Well-Known Member
My mini stem had fallen to pieces. I didn’t come to an agreement with BFG. Please help, I will pay double. I really need this, can’t use my vape like that.

This is so frustrating.
I think you'll have to glue it !
Titebond "original wood glue"… food safe... dunno if it will withstand the temp...

Or get a metal stem from BFG ?
 
Flow,

leanpubpackage

Well-Known Member
My mini stem had fallen to pieces. I didn’t come to an agreement with BFG. Please help, I will pay double. I really need this, can’t use my vape like that.

This is so frustrating.
The wood looks REALLY dried out. With exposure to that much heat, it's important to keep the wood moisturized with wax. I think the fusion should come with a small container of wood wax
 

abofaza

New Member
I need the original rosewood mini stem. I will pay as much as it’s needed. Please someone help, I can’t even sell this device in a state like this, I need this original part.
 
abofaza,
  • Like
Reactions: TedJones

Flow

Well-Known Member
I need the original rosewood mini stem. I will pay as much as it’s needed. Please someone help, I can’t even sell this device in a state like this, I need this original part.
So you just have to place an order to any online shop !
Find a rosewood mini stem, for instance in "lacentralevapeur"... LINK
Oh, and by the way, have a look at the full glass stem they sell ;)
It's for dani 3 but i think they are ok with the fusion...

Can someone here confirm it ?

So just go to your usual online shop in "bits 'n parts" :)
 

Sour Dream

Blue Dream enthusiast
yea the glass and every Dani stem works with the fusion. Idk what dude needs help with at this point since he hasn’t bothered to tell us
 
Sour Dream,
  • Like
Reactions: Flow
Top Bottom