• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Which one is restrictive, the BU062(8.5") or BU073(13"), or both?
I have been close to getting the 8.5" a few times.

The 8.5" is the one I am talking about, that is the one I have, but now I am curious about the 13" (and the ash catch too) damn it!

I think the 13 is also a bit restrictive if I remember correctly, but I would expect the ashcatch to be a bit better with that circ perc instead of the holed perc below the ladder?

Like the hammer version from Biao here it seems to have a bit more of a shower head perc with slits only on the bottom:
Screenshot-20220221-141803.png
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Man, I nearly purchased that..again until I saw it has a 10mm joint...again!
I might give the 8.5" a miss, I am sick of restrictive bongs at this time.

I am fairly certain it was @RustyOldNail who ended up buying it, because they confirmed by message that it was actually a 14 mm joint in fact! So you should hit them up, because they clearly have not changed the listing lol but you can confirm search here?
 
Shit Snacks,
  • Like
Reactions: LesPlenty

RustyOldNail

SEARCH for the treasure...
I am fairly certain it was @RustyOldNail who ended up buying it, because they confirmed by message that it was actually a 14 mm joint in fact! So you should hit them up, because they clearly have not changed the listing lol but you can confirm search here?

Yup…. 14m female. I use it a lot, even with a CLEAR (non-ground) 10mm adapter for DV’s, etc.
 

pomogirl

Well-Known Member
I need to stop looking at this rig.

That does not help, I think I should just get it and stop the FOMO!
I keep telling myself to wait for it to go on sale.

And find out that my so-called counterfeit is made in China in the same factory as the American company claiming to have US-made glass...there are shonky fuckers wherever a dollar is to be made.
I also can't stop looking at it maybe for the last two years. That famous glass company does have a partial claim to being American, but their manufacturing must unfortunately likely be off-shore:

Every piece we sell is designed, prototyped, inspected for quality, and shipped from our headquarters in Austin, Texas​

 

pomogirl

Well-Known Member
The following has a LOT of draw resistance, the reason I do not like it much, but if that is what you want,
rBVaE2JqRayAUf7DAAJ60cDJjP8026.jpg

I love to watch turbo percs, but fritted perks are going to have a ton of resistance like you say. It would be better to get an open draw piece with a removeable fritted ash catcher, wouldn't it? I gotta ask the questions, or I'm not going to learn...btw nice use of rubber bands!
 

Kudzu407

Para-Vaper

Hi Folks, here is my latest arrival.It’s the Othership Exosphere from glassgallery420.com. There are many versions of these out there but are mostly 7 and 8 inches tall. I try to stay at 9 minimum so began looking. This one is sold as 9 and was 8.75 and close enough for me. I wanted something easy for one hand and this is it. At 3in. diameter the sphere is just a hair larger than a baseball and a pleasure to hold. It cools really well for a small amount of water and 3 SOL percs make for an open draw that I like.👍

 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Meanwhile I already pulled the trigger on these 14 mm hydro tube and u turn adapters, getting a few dollars off each, so cheap:
Screenshot-20220529-190730.png
Haha yeah the U-turn have many purpose, I think they are designed so you can use hydro tube like a bubbler, but also originally I think they are designed so you can connect e-cig things to regular bubblers...?? I have Sai setups that I don't really like to use so that's not really my goal but so many uses!

I already have Pinnacle water tool hydrotube, which is basically the same thing, it does work well, I like that this has the narrower curved sipper style mouthpiece though... Should also make a good option for a double perc bubbler mouthpiece, too many uses!

Well even though these came from different sellers, they arrived yesterday together just like I ordered them together, took exactly two weeks!

PXL-20220612-004947255.jpg

Using the adapter with the tube it becomes like a two part wet hook, works pretty well actually!

PXL-20220612-221210161.jpg


Really nice as a mouthpiece for the octa base though, just need the right water level and airflow...
 

LesPlenty

Well-Known Member
Company Rep

pomogirl

Well-Known Member
If alternative down stems are needed, these holed seem quite nice, they have these slitted too not sure if they will be the right sizes necessarily though...
Screenshot-20220607-120516.png


Same great shop that has the grav upline bubbler, also they have the tall upline rig in the grav style here (seems nicer than other DHg versions from other sellers) only like $34 with coupons now...
Screenshot-20220607-120758.png


Oh and they also have this ashcatcher version of the circ perc to ladder perc of the upline bubbler here too...
Screenshot-20220607-121055.png
That skinny upline is all over my searches, but it creeps me out! Weird, but true, though maybe it's how illogically weighted it seems--top and bottom heavy. But aren't the bullet holes just that--holes that restrict but not too much? Or do they help with "stacking" if that's really a thing? The ash catcher is cool.


IMG-20220606-125357.jpg

IMG-20220606-130021.jpg


I won't get to test this out until tonight but it looks like a good time to me 😁
Nice, a Dyna and Enano XL together at last with the great MK2. Does that mean if I get this glass I can buy another log vape?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I have been told the water hammer has a 14mm joint and I asked them to change the listing to suit,

Nice, they don't always correct, it wasn't yet, but when I did point out free shipping on something they did adjust with a new listing entirely...

That skinny upline is all over my searches, but it creeps me out! Weird, but true, though maybe it's how illogically weighted it seems--top and bottom heavy. But aren't the bullet holes just that--holes that restrict but not too much? Or do they help with "stacking" if that's really a thing? The ash catcher is cool.

Haha yeah it is a very commonly copied piece, but they are not all created equal, this one seems the nicest closest to the original, someone else called this style the barbell because of the shape lol Yeah they are holes, multiple choke point holes, creating a natural perc, so it's not going to bubble stack the same way like gridded type perc, it would instead give you a lot of water movement with a lot of water but minimal diffusion, cooling with flavor retention, is the idea? But it has quite a bit of chug and restriction I believe... The ash catch should be the smoothest least restrictive with its circ perc and ability to put your own mouthpiece or hook rather.

Nice, a Dyna and Enano XL together at last with the great MK2. Does that mean if I get this glass I can buy another log vape?

Haha you can always buy another log vape, and more glass, and more vapes, and more glass... :lol: :mental:


PXL-20220613-230627011.jpg

Meanwhile my last 5/12 order from allaccessary arrived today, despite the tracking not showing any change since 5/16, this drop down and this 45° angle adapter (puts the mouthpiece at a slightly different angle than this other one I have from them to mix it up a bit! also have one coming from Biao now with my color recyclers too)
 

LesPlenty

Well-Known Member
Company Rep
PXL-20220613-230627011.jpg

Does that dropdown work on a Matrix sidecar with a dewer joint or similar? The version I got had the joints the other way around and the male joint will not let the dropdown clear the edge of the can. If it does work on those style cans do you have a link to that specific dropdown?

Edit, the listing for the water hammer has been updated to correctly say 14mm,
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Does that dropdown work on a Matrix sidecar with a dewer joint or similar? The version I got had the joints the other way around and the male joint will not let the dropdown clear the edge of the can. If it does work on those style cans do you have a link to that specific dropdown?

I did link that specific drop-down, this is the 18m-18f, the orientation may depend on the exact size, that is the case with the other drop-downs from this seller... I don't have that rig (another reason I hate it), but their drop downs seem to fit more than expected?
 

cybrguy

Putin is a War Criminal
I bought one of these and then ordered a second as a back up. I had 14mm stems already. I ordered cooling stems from Rogue Was Works which are in the mail.
This looks like a great deal for the price, but I would think it might be difficult to keep upright depending on what you have hanging off it. It doesn't have much of a base...
 

nockel

Member

This looks like a great deal for the price, but I would think it might be difficult to keep upright depending on what you have hanging off it. It doesn't have much of a base...
I want to combine it with a digital heating jacket for warm water a whole evening. I think that should stabilize it too.
 
Top Bottom