Petetbay

Well-Known Member
I've been running this top on my Peak Pro for about 2 months now. It lets me use my existing rigs.

whipadapter-v2_360x.jpg


I have the sneaky Pete version, pretty cheap in the states.


76CBBB27-D46A-461F-A6D5-F06032C62344.jpeg
 

PoopMachine

Well-Known Member
I picked up one of these. It works really well.


I have the official Puffco recycler coming as well. Looking forward to trying that out.
 
PoopMachine,
  • Like
Reactions: LesPlenty

PoopMachine

Well-Known Member
It is supposed to work very well, but the price seemed too high for Chinese glass for me.
Glad I never got the Indiglo now as the purple hue is painted onto the glass :uhoh:
Careful when doing any repairs,
https://www.reddit.com/r/puffco/comments/s40sp7 At least it can be fixed cheaply...what a nice person.:cheers:

I found it on a place that had it on deep discount or I wouldnt have bought it either
 
PoopMachine,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
I updated firmware no problem, with all the units out, there are a few knuckleheads that always screw up the update for whatever reason.
My unit has not worked properly since my first/last update (I have to use a dodgy 3rd party app due to Puffco's planet America business plan). The LEDs do not change colour properly anymore (just flicker white), the wireless charging stops working and the worst is the Low setting starts counting down as soon as you start the session instead of heating up first. The led colour farting and wireless charger both sometimes come right after a 20 second button hold reset but the short blue timer does not.
That said stealth mode gives me back my colors to know what temp I am on without the app going and I just do not use the blue setting.
I now have 2062 dabs on my OG atty and may try the recommended 2000 dab service,
 
LesPlenty,
  • Wow
Reactions: Petetbay

randyrhoads

New Member
Hello everyone,

I recently uploaded a guide on how to dab bubble hash in a puffco peak pro. If this sounds helpful to you, here's the link to watch!

Love,
Randy Rhoads FL :leaf::razz::clap::wave:
 
randyrhoads,
  • Haha
Reactions: LesPlenty

Principal Guy

Well-Known Member
I have always struggled with dabs being too hot and painful on my lungs, especially on a banger. Tried low temp Rio dabs and still struggle. I can put dabs in with flower and it seems fine. Pulled out my original Puffco Peak from storage after a year or two and enjoyed it. I immediately rushed out the next day and bought the Puffco Peak Pro. What a pleasure it has been. Using low temp settings, starting at 450 degrees, and truly enjoying dabs for the first time in my life.
 

LesPlenty

Well-Known Member
Company Rep
That said stealth mode gives me back my colors to know what temp I am on without the app going and I just do not use the blue setting.
All my lights have failed apart from a flicker now and then so I have to use my phone to control all settings that need colour reference on the unit.
I did manage the above 2000 dab service and needed precision bits longer than I had so I ordered the following to reach one of the 3 different screw heads used as it was too deep for socket style bits to reach/fit, a person would think Puffco are trying to make it hard to get into a unit. :lol:
s-l1600.jpg

starting at 450 degrees, and truly enjoying dabs
That is where I hang out, great flavour until no vapor, and then a nice easy cleanup.
 

Melting Pot

Sick & Twisted
I didn't know where to put this so I figured I'd share it here. I got a pro the other day from trulieve with my 35% off discount 👍and I get a script sticker so I can travel without fear of it being confiscated.
New rabbit hole anyone have any good input on jcvap ica's?
 

LesPlenty

Well-Known Member
Company Rep
New rabbit hole anyone have any good input on jcvap ica's?
I got a SiC and a quartz job from JCVAP, I would only bother with the SiC and only if you are a high temp user as it is easier to keep sparkling clean than the OG if high temp using. I have put over 2000 dabs on the OG PPP atty since last using an aftermarket atty.
I have been looking at JCVAP's 360 degree heating unit, this is what I would get now,
ICA-3D-and-SIC-Insert.jpg

 

sukhda

Member
Can anyone offer a concentrate newcomer some guidance please...

I've just picked up a new Peak Pro and am trying to work out how much of a dab I should start with, along with a suitable temp.

Generally my tolerance is OK, not great, and like I say I've only ever smoked/vaped flower so this is all new to me.

Really just trying to avoid chazzing the bowl on day 1, which from what I understand comes from too small a dab and/or too high a temp.

My feeling is to start small, say 0.05g on blue/green temp.

Does that sound reasonable? Can anyone offer any further guidance?
 

LesPlenty

Well-Known Member
Company Rep
My feeling is to start small, say 0.05g on blue/green temp.
Below is a 4mm ruby ball, the dab next to it is about as small as I would go but that is just me,
1662012086187-jpg.39640

And as large as this with no problems but takes multiple reheats to finish on low which I like. (shown with a 6mm ruby ball),
1636173258924-jpg.31483

If you keep to the bottom 2 temps you should never char, even with a tiny dab, just keep hitting at the lower temps until you get no more vapor. I rarely use the top 2 temps but when I do I never let the load get completely dry before I finish pulling, the little bit of 'wet' left helps with q-tip clean up.
 

Principal Guy

Well-Known Member
Can anyone offer a concentrate newcomer some guidance please...

I've just picked up a new Peak Pro and am trying to work out how much of a dab I should start with, along with a suitable temp.

Generally my tolerance is OK, not great, and like I say I've only ever smoked/vaped flower so this is all new to me.

Really just trying to avoid chazzing the bowl on day 1, which from what I understand comes from too small a dab and/or too high a temp.

My feeling is to start small, say 0.05g on blue/green temp.

Does that sound reasonable? Can anyone offer any further guidance?
I really struggled with doing dabs, I was going way too hot. I edit the lowest level, blue, to 425° and increase time to one minute. Usually can finish the dab in one cycle, sometimes give it another ten seconds. It’s been a game changer for me. I never thought I’d say this, but I think I prefer dabbing on my puffco peak pro more than vaping flower.
 

sukhda

Member
I really struggled with doing dabs, I was going way too hot. I edit the lowest level, blue, to 425° and increase time to one minute. Usually can finish the dab in one cycle, sometimes give it another ten seconds. It’s been a game changer for me. I never thought I’d say this, but I think I prefer dabbing on my puffco peak pro more than vaping flower.
Oh wow, OK interesting. I've literally only had one dab out of it so far and I stuck with the default blue profile (490⁰ for 40 seconds).

I've been waiting for the weekend to really experiment, so this will be the first thing I try. My tolerance really isn't great so I tend to be more of a flavor chaser, and it sounds like your setup could give me exactly that.

I'll still not 100% of how big of a dab I should be doing, but I guess it'll be fun working it out.
 

Petetbay

Well-Known Member
how often do you take out and clean your atty?
I usually clean when the reclaim starts overflowing to the bottom of the glass and even that could happen for a while. I’m thinking 300-500 I find myself cleaning it and the atty and bottom at quite gunked up, big job. There’s probably a lot of people do it 100-200 dabs making it an easier cleanup.The design lets you get away without cleaning for quite a while, better than most e-rigs. That’s what I like about the Pro because I’m lazy. :2c:
So I've had mypro for about 20 days or so my dab counter say 1333
That’s a lot in 20 days. :o
 

Melting Pot

Sick & Twisted
I usually clean when the reclaim starts overflowing to the bottom of the glass and even that could happen for a while. I’m thinking 300-500 I find myself cleaning it and the atty and bottom at quite gunked up, big job. There’s probably a lot of people do it 100-200 dabs making it an easier cleanup.The design lets you get away without cleaning for quite a while, better than most e-rigs. That’s what I like about the Pro because I’m lazy. :2c:

That’s a lot in 20 days. :o
Appreciate the information 300 seems like a good #.
Tha dab counter is one of my dislikes. I don't like to be reminded of my heavy use.🤭
 

LesPlenty

Well-Known Member
Company Rep
@LesPlenty how often do you take out and clean
300 sounds good, 500 would be my max but I try to remember to do it every 250 or once a week if it is your only rig since doing the 2000 dab service after seeing how reclaim can get built up where it shouldn't. An easy job to clean weekly, especially with an ultrasonic cleaner, just don't hover the Atty straight above the transducer while in its iso bath suspended in water...fan forced to dry and good as new.
20 days or so my dab counter say 1333
Nice, getting your money's worth out of the unit!
I was going way too hot.
My default is 245C/473f for 2 minutes.
 
Top Bottom