Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

[SquirrelMaster]

Maybe discontinued early 2020? 2021 they would have been discontinued at that point I believe. At some point, maybe around then, they did a limited run. Maybe you remember that?

It could be the limited run I'm remembering. I had considered a Flowerpot when I was looking at my first desktop but went with a Hybrid instead (mistakingly) and then it took me a while to actually order a Flowerpot. Hindsight.

It was around mid 2020 I think. I got my Vrod in December 2019 and the AVB can was readily available along with other now discontinued items like the old PID stand or the dual PID options. I got my AVB can in a limited run during November of 2020 so it was discontinued by late 2020.

I'm really surprised it went away but they kept the 5" stand. I love my can and see the stand as more of a accesory to the can then something I'd buy just to stick a heat post in the large area.

I remember looking at the dual PID and wish I could have gone that route. I love my two Auber's but space is always at a premium. If they made a cover for both I'd be very interested so I could at least put everything on top. I have just the 5" stand/debowler for my B-1 and B-2 but I never use the debowler because it's a stand for one glass bowl while the bottom is full of accessories. I'll need something else for 420 when I order a T-Cup. CH makes some awesome stuff!

 

[mephisto]

Can anyone confirm that the B1 injector will mate with a stock Vrod bottom. I don't know that the injector will work with my 14mm shovelhead bowl.
After looking at CH site, I need an injector bowl.

 

[The Stray Fox]

Can anyone confirm that the B1 injector will mate with a stock Vrod bottom. I don't know that the injector will work with my 14mm shovelhead bowl.
After looking at CH site, I need an injector bowl.

I’m a bit confused by your question. The Injector is the bottom piece. It could work with your VRod top. The VRod and WeedEater bottom piece won’t work with the ballers. The Injector will only work with a ShovelHead if you get creative. I’ve bought a bunch of injector style bowls. It’s hit or miss. I like Ed’s because it is very easy to set the depth of the screen to accommodate different temperature preferences.

 

[disGRUNTled]

Busted out the old FlowerPot SIC dish & nut.........Stoned outta my mind

 

[Texus]

So I am curious how many people who got injectors have been going back to their Shovelheads?

 

[The Stray Fox]

So I am curious how many people who got injectors have been going back to their Shovelheads?

The Injector is fun to turn on and tinker with bowls. The B-1 with the ShovelHead is like my life support machine. I don’t want to unplug it. I could really use an injector ShovelHead with an adjustable screen.

 

[Xclerk]

The Injector is fun to turn on and tinker with bowls. The B-1 with the ShovelHead is like my life support machine. I don’t want to unplug it. I could really use an injector ShovelHead with an adjustable screen.

Maybe we will see some ti injector style bowls.

 

[jasp3r]

Maybe we will see some ti injector style bowls.

Yeah me too. Qaroma just came out with some so CH should follow suit

 

[Tuck]

With the Injector & the Elev8 bowls, about what temp are you guys using?

 

[The Stray Fox]

Stick Brick just announced they have Injector Bowls. I think I’ll give this one a try. Anyone using there HotRod Bowl with their CH Injector?

@Tuck Im on at 560 with the Injector. I get the herb pretty close to Injector by raising the screen.

 

[David Root]

22 mm bowls in stock....

Just saw this.

Outer diameter 22mm Glass bowl slide flower screen Glass bowls With Handle joint size 18.8mm [PG5076] - $20.00 : popularglass.com

popularglass.com Outer diameter 22mm Glass bowl slide flower screen Glass bowls With Handle joint size 18.8mm [PG5076] - Newest Arrival Clear Glass Bowl. With Slide Flower Bowl. Withoutlogo. Slide Flower Screen With Handle Glass Bowl Clear 18.8mm joint size. All same as the pictures.

www.popularglass.com

David

 

[The Stray Fox]

Now OldHead will have an injector option too? I’ve yet to stray from my CH love. Now the SB injector bowl releasing yesterday is making even more sense.

photo credit: OldHeadTradingCo

 

[Planck]

It seems unlikely this will have any functional advantage over the CH injector.
It's attractive looking.

-----------------
How are the non OEM wooden coil handles like iDB and others attached to the coil?
It appears that they depend on friction alone?

 

[Bad Dog]

How are the non OEM wooden coil handles like iDB and others attached to the coil?
It appears that they depend on friction alone?

yes. mine don't move around though

 

[gingerbier]

Stick Brick just announced they have Injector Bowls. I think I’ll give this one a try. Anyone using there HotRod Bowl with their CH Injector?

@Tuck Im on at 560 with the Injector. I get the herb pretty close to Injector by raising the screen.

Yeah, I tried a bunch of bowls with my B-2 with the injector. Ed's TnT bowls, a Purr Glass bowl made for the Neo, Sticky Bricks, and any other glass bowl I have that were narrow enough to work. The Hot Rod bowl is winning the reach test. I tried it for giggles after Troy raved about it. It hits better than anything else so far.

 

[Timps27]

I didn’t try as many as you, but I wanted to try a bunch and I agree, my HR bowl is the one that always gets put on.

 

[The Stray Fox]

@gingerbier @Timps27 Ive pretty much tried all those with some suckers and there. Ed’s has worked for me the best so far. Thanks for the recommendation. I went ahead and ordered one. I have a special love for SB, having lived in Asheville for a number of years, and love to support them.

 

[manakata]

Yeah, I tried a bunch of bowls with my B-2 with the injector. Ed's TnT bowls, a Purr Glass bowl made for the Neo, Sticky Bricks, and any other glass bowl I have that were narrow enough to work. The Hot Rod bowl is winning the reach test. I tried it for giggles after Troy raved about it. It hits better than anything else so far.

same here. i just ordered the hot rod bowl and excited to try it. i like eds tnt bowl but i dont like the function on it. its a beautiful piece but i have been using just for flavor not clouds. right now the elev8r glass bowl is my to go to bowl.

 

[Texus]

@gingerbier @Timps27 Ive pretty much tried all those with some suckers and there. Ed’s has worked for me the best so far. Thanks for the recommendation. I went ahead and ordered one. I have a special love for SB, having lived in Asheville for a number of years, and love to support them.

No kidding? I grew up 30 min from Asheville.

I haven't really mastered the Hot Rod bowl with my B2. Any tips from those who love that csmbo?

Just hasn't approached what I get from 18mm Female glass. Bowls. Will grab an Ed's bowl once back in stock.

 

[The Stray Fox]

I really like this set up with the Injector. 5/8” screen instead of the standard 3/4” screen for the ShovelHead.

 

[The Stray Fox]

@Ed's TnT this stuff sparkles in the sun lit window.

 

[Ed's TnT]

@Ed's TnT this stuff sparkles in the sun lit window.

Gorgeous

 

[The Stray Fox]

I’m not sure who to credit this idea to. I first saw it in the CH Discord. I have an an OG Baller that I wanted to utilize my weed eater top with and these are 3/4” Concave Ti Screens look really nice and function great. With a little sanding for fit I was able to get a really tight fit. You do have to make some size adjustments so keep in mind they are not a perfect fit. I suppose you could adapt these for use in the B-1 nut and potentially in the SH.

 

[DHV8654]

I need some help, I cannot get my b1 to milk up. I have tried a mega globe and a china fab egg. Both 14mm. I use 2 (old head) scoops of fine grind. I have it filled with 3mm rubies set at 695.
I get vapor but it’s not thick and milky. I have tried a slow long draw and hard fast draws, same result.
Am I doing something wrong?
Would the injector and a glass or wood bowl help?

 

[Chicken No Name]

I need some help, I cannot get my b1 to milk up. I have tried a mega globe and a china fab egg. Both 14mm. I use 2 (old head) scoops of fine grind. I have it filled with 3mm rubies set at 695.
I get vapor but it’s not thick and milky. I have tried a slow long draw and hard fast draws, same result.
Am I doing something wrong?
Would the injector and a glass or wood bowl help?

Strange. You should get thick vape at that temp. I'm running 585 and within 2 seconds it milks. Wondering if something not quite right. Don't know what though.
I do favour a glass bowl but for taste aspect. Won't have much if any effect on clouds....