letter never sent
reckoner
The VAS is strong with this one. My initial reaction was "I'd never buy this vape." After reading all the feedback in this thread, I'm very tempted!
Good luck, I had the same line of thinking.The VAS is strong with this one. My initial reaction was "I'd never buy this vape." After reading all the feedback in this thread, I'm very tempted!
Same here lol. I originally came in here to laugh and bemoan.Good luck, I had the same line of thinking.....I was keeping it to artisan vapes because I was tired of mediocre results from so many mass-produced vapes. It checks every box, for me anyway!
lol, that is truly some good stuffYou know you've had enough when you're convinced the aliens want their vape back
![]()
I absolutely agree and is why I never visit the TM thread anymore. Never had such desire to not buy a Vape. Never experienced such disdain for something that had zero interaction with me either. But it's also an interesting marketing phenomenon to observe. Imagine If someone could replicate what TM did to gain such die hard fans? I'd want customers like that for everything I sell lolNo No No !!! I'm not falling for this BS again. Everyone raved about the TM - greatest thing since sliced bread !!! Blah Blah Blah. My TM does not work properly. Horrific lack of customer support. Fanboys constantly defending the support from TM. Oh well, what do you expect he is one man artisan. Oh well, he moved - we can't expect support. There is a language difference - can't expect customer support. Covid - can't get parts - can't expect customer support. We should learn how to fix it ourselves - no thanks. However, I will give credit where credit is due - the damn thing works exceptionally well when it it does operate properly. Okay - end of rant !! Can't help myself - spent the night in emergency room peeing blood, vomiting, and in the most intense pain I have ever experienced. Apparently I have a kidney stone. On many medications including Oxycodone.
Could use more Morphine. Hey, maybe I'll pee in the TM to catch the kidney stone. At least I would get some benefit from it.
So the bottom line is no more new (allegedly) the greatest vape ever . No No No. I will wait a year until we see how this thing holds up. Now it is time for another Oxycodone and some Indica. Some after, I will probably think the year is up or I just won't give damn. Do I have to order the cup thingy with the device? I have no desire to drink from the same device I vape from.
Again sorry for this long, and probably, disJOINTed post. I will admit - I'm currently F**ked up. I wonder if I should visit a house of ill repute where the women there could remove the stone by suction. I didn't really write that did I? Wife in hallway - gotta go.
Good luck, I had the same line of thinking.....I was keeping it to artisan vapes because I was tired of mediocre results from so many mass-produced vapes. It checks every box, for me anyway!
I don't use that feature anymore either, it's easier to just hold the button and release after I'm almost done to clear the stem, less waste of time.Oh mine always takes a second or two to shut off, that's why I hardly used that feature, because it is too hard to clear properly...
Also was it you, or someone else who talked about accidentally moving the heater screen and having to reset it? I might have touched mine the other day, didn't think it shifted, but now looking at it it seems like maybe it is a little higher than it was? Hard to tell and afraid to touch it much now and risk pushing it further... No idea how it could be reset?
I'm in the same boat, been following this thread, and reviews have been great!The VAS is strong with this one. My initial reaction was "I'd never buy this vape." After reading all the feedback in this thread, I'm very tempted!
It was me who had problems with the screen. I wish I had taken a picture when it happened, my screen was visibly 1/8" lower on one side and almost touching the sensor under it.. The screen sit in a tiny groove and it's too easy to push the screen in if you touch it when cleaning. I decided to try to put it back in place because I was concerned that the herb would not heat evenly or that the screen being so close to the sensor might interfere in the performance of the vape.
If you absolutely have to reset the screen this is how I did it.
First of all you have no space to work with and you don't want to break the sensor so go slow and be careful. I took a pick to try to lift a corner of the screen so I could pull it of with some tweezer, try to not deform the screen as much as possible, pull it out of the groove bit by bit. This screen is not the same as the one they give you as extras for the cups, it is much thinner and the mesh size is smaller. The screen was a little deformed where I use the tweezer so I used the handle of a brush to use as a rolling pin to flatten the screen as much as I could. Then you just have to put it back into place, I had to use the tweezer and the pick to put it in place because there no space to use your fingers. Hold the screen with the tweezer, push it in the groove with the pick. If you see that it's no going in like it should start again, I had to do it three times before the screen looked good enough for me.
After doing this I can guaranty you that you will never want to touch that screen ever again. Bottom line is don't play with it unless your really need to, if the vape still perform like it used to you should leave it alone, no need to risk breaking something.
This is what it look like after I reset it:
View attachment 5125
You can see the screen is a little bit too low in the back but once it's pushed too low you can't pull it up without taking it out entirely so it's gonna stay like this. I don't think the performance of the vape has changed too much but I think the heating is less even than it use to, I could be in my mind tho.
And if you're looking at this picture and you think to yourself that screen is not so bad well tell that to my little perfectionist brain that can't be satisfied until everything is level and without flaws. If I wasn't so scared of breaking the sensor you could bet your ass that this screen would be leveled, even if it would take me all night.
I had to re-do this video 4 times.
Yeah don't touch that screen it's not worth it, you can barely see it's not the way it was before. That looks very tasty, must be amazing in the Bowle.Ah yeah I thought it was you! So mine does not look that bad, I was really careful when I was touching it, and I try to be really cautious to only brush anything from around it on the silicone and not touch the screen itself much...
Haha yes thank you, reading this makes me certain I do not want to do it! My hands and back are sore just thinking about it!
Yeah so mine I think looks better than that still, probably fine and has not been actually moved at all...
![]()
I think it's exactly the same thing, feared just a slight little shift, if anything, making me think it got a little more domed perhaps? I don't think it's affecting performance so I don't want to touch it! Presumably fine
Haha yes the perfectionist brain I know what you mean, that's why I brought it up, and you're helping me realize I should ignore it!
I got some mail order CBD for the first time, check out that thread somewhere here for more details... But for the relevant info here, I've been doing some bowls of the flower in my TM, on its own and mixed with regular, below I did a bowl of regular lemon cello with some CBG keif on top:
![]()
Then after two hits on level 2, (I think only) one on level 3, and one on level 4:
![]()
Pretty nice experience! I have some CBD rosin coming that I will probably try in the Bowle too, along with some more flower in fruitier varieties that I am excited for...
Vitolo you make the best usage videos ever!! The ones with you and the supreme are saved to my youtube account. Keep vaping bro!!! My VAS is acting up for this one...damn @FlyingLow it made you put the p80 down...yikes!!! This vape is on my radar.
Very ingenious camera placement for the folded effect!I prefer to use mine sans cup. I wish there were different stems for those that use it this way.
I prefer to use mine sans cup. I wish there were different stems for those that use it this way. There's no need for the high profile of the stem if there's no cup on it, so I think it'd be nice if they offered a lower profile stem.
Something like this, but done properly:
View attachment 5126
![]()
@StuI prefer to use mine sans cup. I wish there were different stems for those that use it this way. There's no need for the high profile of the stem if there's no cup on it, so I think it'd be nice if they offered a lower profile stem.
Something like this, but done properly:
View attachment 5126
![]()
@Stu
I was dreaming of something similar but for hydratube connection.
Snake over the top of the puck like yours but end n the middle of the puck with a 14/18 male joint that HT would sit on.
BUT ....the Bowle vapor is so cool and smooth that water may not be needed. That says a lot about it.