• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Concentrates for Noobs - Q&A

Kins

Well-Known Member
Come join us! :rockon:


 

LesPlenty

Well-Known Member
Company Rep
I don't know why anyone would recommend this stuff.
I mainly see it (RSO) used as an anti-cancer treatment where you are looking for high strength multiple uses in a certain amount of time and most use a toothpick to scrape a bit off in your mouth (careful of the black teeth smile)
 

Kins

Well-Known Member
I mainly see it (RSO) used as an anti-cancer treatment where you are looking for high strength multiple uses in a certain amount of time and most use a toothpick to scrape a bit off in your mouth (careful of the black teeth smile)

A "bit", like a grain of rice or bigger?. I may try this tomorrow.
 

shredder

Well-Known Member
It's just terrible I don't know why anyone would recommend this stuff. I will try eating some but just a grain of rice or so. I don't want to get sick or anything. I have about 1/4 of the syringe now, that's how much was wasted.

You could mix what you have left in butter or oil, and use that in a recipe for brownies or something. Rso works well for medibles. And chocolate hides the weed taste pretty well.
 
shredder,
  • Like
Reactions: LesPlenty

shredder

Well-Known Member
How would I figure out dosage though?. I have a mix I could make in an 8" X 8" square pan.

You have to know or estimate the mg of your oil. And the potency.

If you started with 1 ml and now have 1/4 of that and it's 90% cannabinoids you could figure it's 25% of 900mg or 225mg. Then divide 225mg by the number of portions. If your 8x8 mix had 9 servings you divide 225 by 9 for 25mg each brownie.

25mg for most people is a mellow good time buzz. If you want more or less adjust to what suits you by eating more or less.
 
shredder,
  • Like
Reactions: LesPlenty

Kins

Well-Known Member
You have to know or estimate the mg of your oil. And the potency.

If you started with 1 ml and now have 1/4 of that and it's 90% cannabinoids you could figure it's 25% of 900mg or 225mg. Then divide 225mg by the number of portions. If your 8x8 mix had 9 servings you divide 225 by 9 for 25mg each brownie.

25mg for most people is a mellow good time buzz. If you want more or less adjust to what suits you by eating more or less.

Thanks!
 

Kins

Well-Known Member
You have to know or estimate the mg of your oil. And the potency.

If you started with 1 ml and now have 1/4 of that and it's 90% cannabinoids you could figure it's 25% of 900mg or 225mg. Then divide 225mg by the number of portions. If your 8x8 mix had 9 servings you divide 225 by 9 for 25mg each brownie.

25mg for most people is a mellow good time buzz. If you want more or less adjust to what suits you by eating more or less.

It's only 64% thc according to the package the dart came in. So would that make it around 16mg per brownie? So I should eat at least 3? Thinking I should just cut 4 equal pieces. What do you think? @shredder I made 4 cuts and cut one of those cuts in half and half to me and half to the wife.
 
Last edited:
Kins,

FlyingLow

Team NO SLEEP!
If you are not experienced in edibles, just eat one or half of one and wait 20-40 minutes. You will feel it.

If you want more intensity, then eat another.
 
FlyingLow,

Kins

Well-Known Member
If you are not experienced in edibles, just eat one or half of one and wait 20-40 minutes. You will feel it.

If you want more intensity, then eat another.

I had one of the four pieces cut in two and gave half to me and half to the wife. Didn't or don't feel anything. It's been about 2 hours.
 
Kins,

shredder

Well-Known Member
It's only 64% thc according to the package the dart came in. So would that make it around 16mg per brownie? So I should eat at least 3? Thinking I should just cut 4 equal pieces. What do you think? @shredder I made 4 cuts and cut one of those cuts in half and half to me and half to the wife.

If they're 16mg (I didn't do the math) you may need 2.

For me 20mg is noticable, but we're all different. Eating half is a good idea as is waiting over an hour before trying more.
 
shredder,

Kins

Well-Known Member
If they're 16mg (I didn't do the math) you may need 2.

For me 20mg is noticable, but we're all different. Eating half is a good idea as is waiting over an hour before trying more.

I don't think I'm gonna try that till tomorrow. I do feel more tired than normal so maybe it is working slightly.
 

Kins

Well-Known Member
Hey there I got my first e-nail from mini nail. Today I tried it out. It works great but I hate that's corded. Kinda makes things awkward. Now I think I like flower better because the high last longer but I like dabbing because it's you right away. Flower is much more affordable and I think you get more for your money that way.
 
Kins,
  • Like
Reactions: arb

shredder

Well-Known Member
Hey there I got my first e-nail from mini nail. Today I tried it out. It works great but I hate that's corded. Kinda makes things awkward. Now I think I like flower better because the high last longer but I like dabbing because it's you right away. Flower is much more affordable and I think you get more for your money that way.

What are you dabbing? And what type of dish?

For me dabbing rosin, at low temperatures, and with a sic halo dish, the effects last longer with less irritation than vaping herb.
 

Kins

Well-Known Member
What are you dabbing? And what type of dish?

For me dabbing rosin, at low temperatures, and with a sic halo dish, the effects last longer with less irritation than vaping herb.

Just had enough money to get some shatter to try. I tried both a quartz dish and hybrid dish. I got a pack of three of those pearls or spheres. While taking them out the package I lost two of them!. Those things are tiny!. No way I can find them on my rug. It was/is Sour patch kids shatter that I'm using.
 

LesPlenty

Well-Known Member
Company Rep
While taking them out the package I lost two of them!.
It gets worse when they are hot, one reason I am looking at swapping my SiC Halo to a Nimbus as the higher wall on the nimbus may stop the pearls spinning out when I tilt the carb cap too far when clearing the bong.
 

Kins

Well-Known Member
Sounds like you are doing something wrong to me...like getting an e-nail that has not been talked about for over 2 years as it is that great...

Well it's my first e nail so I really wouldn't be able to tell.
Something is wrong... dabbing sets me up for the day!

Really? I thought the difference was it's only around a 15 minute high, more intense but doesn't last as long. Ok I just did an experiment. I heated it up first instead of starting it cold. I'm in outer space but not sure it'll last....Let's see!
 
Last edited:

FlyingLow

Team NO SLEEP!
Keep trying. sounds like you are not getting very efficient draws, or using crap ineffective material.

Also, I cant help but notice all your Anti-China rap in the other thread. You should know that while your enail was designed, built, packaged and shipped from Seattle, ALL the parts used were sourced from China!:rofl::rofl::rofl:The PID, the cord, EVERYTHING! I could not help but have a big chuckle after reading your anti-China stance with glass, but you use a mini. LOL.
 

Kins

Well-Known Member
Keep trying. sounds like you are not getting very efficient draws, or using crap ineffective material.

Also, I cant help but notice all your Anti-China rap in the other thread. You should know that while your enail was designed, built, packaged and shipped from Seattle, ALL the parts used were sourced from China!:rofl::rofl::rofl:The PID, the cord, EVERYTHING! I could not help but have a big chuckle after reading your anti-China stance with glass, but you use a mini. LOL.

I don't know about all that now. I just enjoying being baked. I just don't like to support the Chinese economy and would rather support American workers. Yes I understand a lot products are made in China especially electronics, so sometimes you can't avoid it. To intentionally support China is something I'd want to avoid being an American. China made us it's bitch that way.
 
Kins,
  • Like
Reactions: arb

LesPlenty

Well-Known Member
Company Rep
so sometimes you can't avoid it
You could have with your dab set up instead of the mini, I use a DNail(USA) as my daily driver and I could have got a RDK300(I got their cheap China version the RDK200) controller and I ain't got a dog in the USA vs China fight!
 
Last edited:

Kins

Well-Known Member
I actually like the torch and rig method better. Thing I don't like about the e nail is that you are always plugged in. It's just annoying. Using a torch just seems likes it's more effective also. Even better is Stache by Rio because it's all in one. However I like the option to be able to use any glass that I want to with a torch.
 

shredder

Well-Known Member
I actually like the torch and rig method better. Thing I don't like about the e nail is that you are always plugged in. It's just annoying. Using a torch just seems likes it's more effective also. Even better is Stache by Rio because it's all in one. However I like the option to be able to use any glass that I want to with a torch.

To each their own. I but I bet most will gravitate to an enail eventually. My first rig was an enail that I still use daily. No regrets. I had experience on friends rigs using torches but it wasn't for me. And now that I just do low temp dabbing it kinda seals the deal.

Well that is until the next latest greatest comes out, like a true rig like portable.
 
Top Bottom