Herborizer corner

Alexis

Well-Known Member
Hey @biohacker and @Joaon , you are both such great guys in this forum. So friendly, helpful and knowledgable. No attitude, and full respect for others. Both extremely helpful and knowledgable.
I really value you both, and look to you guys and others when I need a reality check, when other lesser minds seem to have gone south.
We are all on the same team, so it pains me to see you haveing a slight misunderstanding for no need.
Biohacker is under lots of stress right now and suffering much, therefore easily irritated by so many arrogant, insensitive members. But you Joaon are not one of them, this is what I wish to point out. I know you did not mean to offend or annoy Biohacker one bit, just a misunderstanding of sense of humour and terminology expression.

I just want to see my new Herborizer family close knit!
I have been in some conditions myself and not had any energy to post recent days, so I've not been present to support you Biohacker at this difficult time for you. Sorry about that.
Not an easy time. Looking forward though- managed to sort of hoover my bedroom and dust all surfaces. Nice clean tidy feel today!

I will have a lazy restful day. I ususally never actually rest due to non stop symptom mangement between life's little daily chores.
But today I am determoned to relax and rest a lot more. I may forgo food altogether so I dont NEED to do steam inhalations, spend hours hacking mucus, cooking, eating, washing up etc.

I will allow myself to enjoy some Omnivap loads and watch some snooker, stress free.
I am reluctant to load up my XL Herbo now, it takes a lot of material to get clouds on less high temp. And whenever I put a larger load, I always have more than half of it the first session.

I jusy cant stop myself. It means I use more than I really need of it, and next time most is already gone, and never a fully staisfying return session.
The Ti will eliminate this Im sure. Like the many times when I fancy a big heavy hit, but dont want to start another 0.4-0.5 gram load.

Hope everybody is having a reasonable (or fantastic!) day.
Hang in there Biohacker. And be cool Joaon, keep all the great info coming on the Ti, my XL brother (soon to be a double brother).:tup:
 
Last edited:

vapmanjoe

Well-Known Member
Hey Joe, drop me a line if you'll come. Guess I will be there at Saturday. Would be nice to meet some guys from FC. There are some others who intend to come.

Same info I got from VDNM 3 weeks ago. Guess delay depends on Sebastien. Devices are out of stock at Herborizer since some weeks too. May be some issues with his suppliers?

Yea that would be fun, i will let you know, i was thinking to stay over the weekend, because otherwise it's not worth the travel time :2c:.

By the way, TI on stock at verdampftnochmal! :freak: i'm trying to justify another vape purchase...i'm happy with my xl.... i do(n't) really need the TI :evil:
 

Alexis

Well-Known Member
Yo! Fresh off of Lacentralevapeur:

"Warning:

En Pre-Order car Out of stock -

Pre order and get 15% discount on all your order - Sending scheduled around May 11th -

Code: PRECOTI

- To return when you order."

So maybe our deals were related to it being out of stock, a pre-order disount?
This did occur to me actually. Man I am really starting to want my Ti now!
Hope everybody is having a good start to the weekend.:tup:
 

Hogni

Honi soit qui mal y pense
at VDNM they say there is a 2-y-warranty (by manufacturer) on electric parts of the Herb Ti.

EDIT: And they recommend to use it with 0.1 - 0.3 g. For larger amounts they recommend the XL.

For my liking 0.3 is more than enough. Prefer a few smaller doses than one big load for more terpenes.
 
Last edited:

buckhakeesah

Well-Known Member
I think the Ti will be my next pick up. For USA owners what adapter/ converter do I need to order to get up and running correctly?
 
buckhakeesah,
  • Like
Reactions: MrMonss

biohacker

Well-Known Member
And I didn't said either the XL is a micro doser, but sure there is some nice clouds with .1g, we will try to make a video next time.
I've just turned on my XL (for science, ya know!), and I can't figure to make any vapor with the top plugged.. Could you try to make a video as well?

Since I mentioned moderate loads, I would love to see these nice clouds with .1g in your XL, I appreciate your efforts to make a video, what temp do you have to use, max? I don't think the top is completely plugged, but @lazylathe would be the one to explain, and I think he does have a video posted, but might be in the Roor Vapour thread, if it still even exists (tried looking unsuccessfully, perhaps merged into this one?)

We are all on the same team, so it pains me to see you haveing a slight misunderstanding for no need.

Umm, what misunderstanding dude? All i'm saying is that the XL requires alot of herb to make decent clouds with it stock. With the top plugged it reduces airflow and probably builds up pressure enough to boil actives at a lower temperature, therefore increasing vapour output and density. That's why I said "fuck tonne of product". I think there maybe some language barrier in this thread considering its origin.

I know you did not mean to offend or annoy Biohacker one bit

I was neither offended or annoyed, and your post actually is making something out of nothing bro! ;) It's almost like all is good, and you're in the corner yelling "fight! fight!" and then make it sound like you are a referee or something :lol: Oh wait, the VapCap shitshow? :tup:

Biohacker is under lots of stress right now and suffering much

I am? Dude, what are you smoking these days? :brow: Please don't make a big deal out of nothing? All @Joaon and I are doing are having a healthy exchange of ideas, and i'm curious as to how it's possible to achieve decent clouds of vapour with only .1g of material in the XL, stock.

I am reluctant to load up my XL Herbo now, it takes a lot of material to get clouds on less high temp

:rofl:What do you think of this @Joaon ? @latulipe999 ?

The Ti will eliminate this Im sure. Like the many times when I fancy a big heavy hit, but dont want to start another 0.4-0.5 gram load.

My point all along. ;)

So maybe our deals were related to it being out of stock, a pre-order disount?

15% off is the same as the 4/20 sale.... so nothing new here, great deal. We just got a much better deal due to a website glitch, like I have been saying all along, and the retailer is being awesome by honouring it.

EDIT: And they recommend to use it with 0.1 - 0.3 g. For larger amounts they recommend the XL.

For my liking 0.3 is more than enough. Prefer a few smaller doses than one big load for more terpenes.

My point all along and the reason i'm so horny for the Ti myself!

Here's a quick vid on level 7.

OH. MY. FUCKING. GOD!!!!!!!! Thanks for that Father Jack! ;) I may need to buy a 2nd now for backup! Talk about the perfect vape!

Man I am really starting to want my Ti now!

You got that right!!!! :nod: Especially after seeing that vid! WOOOOOOAAAAAWWW!!!!!!! :rockon:

Dont they have a 110V US-version? Can't imagine Sebstien wouldn't offer one if he intends to enter the US market? May be not currently but in the next future?

Yes, ofcourse they do! And it's been that way for a decade with the XL! One does not have to be a genius to just go on the website and see 4 different power cord options?

http://shop.herborizer.com/en/system-ti/14-system-ti-188.html
 

biohacker

Well-Known Member
Incredible isn't it?!

But 7 is definitly too high, I get 95% of this clouds at a hair above 5 with a short heat soak and abv comes out clear with a superb taste!

Beyond my wildest dreams! I was not expecting that! I would take your advice at 5ish for better flavour, but can see why he went with 7 for full visual effect, for science and for us!

Nothing like full confidence with my purchase now! I too was planning a "thermal equilibrium" heat soak when using, and nice clear abv sounds healthy and amazing.

Finally after YEARS I find a desktop plugin that I will adore as much as my supreme! This is huge for a picky connoisseur vaporist!
 

Alan Partridge

Smell my cheese
@Joaon bit less than 0.2. That's about the max I'm comfortable putting in.

@PPN what glass are you using? 5 in the tube gives me airy vapour. 7 gives me more thick satisfying clouds and is my go to temp. Still get great flavour. I just have to make sure the heater doesn't stay idle in to bowl too long.

It's a different story in my FC 1000 where 7 is indeed a bit much. Here I would go for about 6, maybe a bit less.
 

biohacker

Well-Known Member
bit less than 0.2. That's about the max I'm comfortable putting in.

Sounds like this is an incredible micro dosing vape! Especially considering the micro loads that @Joaon was using! Killer!

5 in the tube gives me airy vapour. 7 gives me more thick satisfying clouds and is my go to temp.

I wonder if the temperature modulators differ slightly? Or affected by household electricity? Or as you were saying, very glass piece dependent?
 

Pustupillo

The Don_Key
OK guys, the Alan Patridge TI video was a blast!!!

But what about the "high" with the Herb TI? How do you compare it to a 0.5 normal combusted joint?
I really need a sincere review about the medication that you get with a 0.1 - 0.2 dose.

I heard that the Herb XL had some "melted silicone" issues and other bad problems, maye due to bad use.. will the TI be safe?

And PS, i see that the Herb TI e-nail version can arrive to 500°, i use only flowers but i think ill go with it (maybe ill like to have HOTTER temperatures for my flowers)


TI owners give us your precious advice ^_^
 
Pustupillo,

Hogni

Honi soit qui mal y pense
Does anyone have a uk link for the universal water tool adapter from delta3dstudios? https://delta3dstudios.com/nearly-universal-vape-to-waterpipe-adapter-medium/ The international shipping from them is expensive.

Also, any UK links to water tool silicon plugs for cleaning? Like these:

https://delta3dstudios.com/large-tapered-rubber-plug/

That's not right. Up from $70 international shipment from Delta3DStudio is free! There are so much interesting parts at Delta3D that $70 are easy to reach.
 
Hogni,

VanCough

Environmentalist
That's not right. Up from $70 international shipment from Delta3DStudio is free! There are so much interesting parts at Delta3D that $70 are easy to reach.

I'm not a part of this thread so I'm not sure why you've quoted me and responded here?

Also, I'm a student so $70 is a considerable amount for me and I'm not just going to buy stuff I don't need when all I want is the adapter...
 

Alan Partridge

Smell my cheese
OK guys, the Alan Patridge TI video was a blast!!!

But what about the "high" with the Herb TI? How do you compare it to a 0.5 normal combusted joint?
I really need a sincere review about the medication that you get with a 0.1 - 0.2 dose.

I heard that the Herb XL had some "melted silicone" issues and other bad problems, maye due to bad use.. will the TI be safe?

And PS, i see that the Herb TI e-nail version can arrive to 500°, i use only flowers but i think ill go with it (maybe ill like to have HOTTER temperatures for my flowers)


TI owners give us your precious advice ^_^

Been a long time since I've smoked mate but the TI has the best vapour I've ever had. Potency, smoothness, flavour and density. If you don't like this then vaporising ain't for you full stop.

There are a couple of o rings at the top of the heater, under the glass.... I've had it on for prolonged periods and so far so good. Will be keeping an eye on them though.

On another note, I got the TSL029 from Steven on DH Gate. I was so impressed by the tube I wanted something else like it. Was a bit of a let down. The mouthpiece is HUGE. The Herborizer tube tapers in slightly, and it's a nice fit around my mouth. The TSL flares out, and I found myself shoving half my face in to create enough of a seal. As you'd expect the TI milked it effortlessly regardless :tup:
 

Carlos8400

Well-Known Member
Been a long time since I've smoked mate but the TI has the best vapour I've ever had. Potency, smoothness, flavour and density. If you don't like this then vaporising ain't for you full stop.

There are a couple of o rings at the top of the heater, under the glass.... I've had it on for prolonged periods and so far so good. Will be keeping an eye on them though.

On another note, I got the TSL029 from Steven on DH Gate. I was so impressed by the tube I wanted something else like it. Was a bit of a let down. The mouthpiece is HUGE. The Herborizer tube tapers in slightly, and it's a nice fit around my mouth. The TSL flares out, and I found myself shoving half my face in to create enough of a seal. As you'd expect the TI milked it effortlessly regardless :tup:

Try this one:

http://www.dhgate.com/store/product/2016-new-18-5cm-height-glass-s-bongs-glass/371413550.html

Very little filtration, but a lot of cooling since the vapour travels through 4 inches of water/glass. Doesn't get dirty since all the crap gets caught on the flat underneath the bowl. The bowl is right in front of your eyes, good balance, easy to handle, easy to clean. It has been my daily driver for a while and i am still loving everything about it. IMO the perfect match with the Ti, and i have tried it with close to 25 different bongs. If you are OK with how little filtration you get from the Herborizer tube, you will love this!
I own 3 just to make sure i never run out.
 
Last edited:

verdampersweats

Well-Known Member
Did you guys spot the mini grinder is this new? I think i just found the perfect quality way to fix any grinder people deem lumpy just get one big enough to tip this little 30mm mini grinder into without spillage.

So you should get away with a 60mm Space Case even if it is a tad lumpy. I couldnt find anything better in 30mm and anything else would be too big and spill over the sides. And as you guys know powder goes a lot browner in the XL.I think that wont be beaten ever and the only weakness is the o-rings and herbo running out of stock?! Thoughts?
 
verdampersweats,

biohacker

Well-Known Member
The mini looks pretty cool, I might pick one up since it's so inexpensive, and great to just dump into the storage puck! Might be difficult for someone with larger hands like myself, but with a small amount not impossible. I'm planning on picking up a few things from Herborizer.com (e-nail attachment, future new injector stand) so will probably picked up a couple of the grinders as well. Love supporting Sebastien!

As mentioned already, the stock will be replenished within weeks, and a heat shield will be released in about a month with the injector stand. Is that what you meant by o-rings?

Now in anticipation and excitement, I think I need to re-read this thread from when the Ti was released!

Stoked! :rockon:
 
biohacker,
  • Like
Reactions: Alexis

Carlos8400

Well-Known Member
Did you guys spot the mini grinder is this new? I think i just found the perfect quality way to fix any grinder people deem lumpy just get one big enough to tip this little 30mm mini grinder into without spillage.

So you should get away with a 60mm Space Case even if it is a tad lumpy. I couldnt find anything better in 30mm and anything else would be too big and spill over the sides. And as you guys know powder goes a lot browner in the XL.I think that wont be beaten ever and the only weakness is the o-rings and herbo running out of stock?! Thoughts?

I'm not sure what you are asking, but i have the mini grinder and the regular two part, honestly not a fan. I never use mine.
IMO a pretty poor quality grinder similar to the cheap chinese ones you get for free as advertising (and i did get the two i have for free with my orders).
Poor coating, poor quality o-ring, not enough texture for grip on the edges, they gum up fast.
They are not close to the quality of a SpaceCase, and i say that as someone who doesn't care if something is made in the USA or not.
 
Top Bottom