The Persei Vaporizer for herbs and concentrates.

Discussion in 'Portable Vaporizers' started by THC SCIENTIFIC, Jan 13, 2012.

  1. ataxian Well-Known Member

    Message Count:
    1,078
    Location:
    Southern California
    Worth the wait!
    I can't believe I have 2 on way for both PERSEI'S. (Chrome and Black).
    The HERCULES will be a great addition to the medical world!
  2. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,710
    Location:
    Los Angeles
    that tank is made for extracts of all kinds. Some work better then others, but everything works inside.

    Remember this is pure vaporization of extracts. That it why it takes time for the warm up and the cool down.


    We are also working on different style tanks to better make all extracts work.

    What that means, we would have tanks built for water extracts. One built for gold like extracts.


    We made the Hercules to be modular system where you dont have to keep buying new cartridges, or upgrading to new vapes like other models. All we have to do is change parts on it. So no more multiple designs. We are simplifying everything.
  3. OF Well-Known Member

    Message Count:
    7,877
    Location:
    Left Coast
    Looks to me like the concentrate part has to stay upright or it will leak??

    Looks interesting to say the least, thanks for the extra photos.

    OF
  4. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,710
    Location:
    Los Angeles
    If you have the cap on it wont leak.
    BLAZING OG, ataxian and OF like this.
  5. braboftw New Member

    Message Count:
    19
    Just ordered the persei and the hercules off planet vape. this will be my first vape pen, very excited! Finally decided to stop lurking and sign up too!
    DubCRider, UpUpandAway and ataxian like this.
  6. MaxVapor The Professor

    Message Count:
    142
    Location:
    On the edge
    I got to see the prototype at the UP store (so shipping product may be different from what I saw). It looks like the cap will prevent leaks, but I think if it's going to be in your pocket you might want a rubber-band to make sure it stays closed. It's not clear to me wether the bottom of the tank has an outlet or not, but if that is the case then I think it would have to stay upside-down to not leak. I guess we'll know in a few weeks.
    ataxian likes this.
  7. Bugsy VapeHare

    Message Count:
    45
    Location:
    Great White North
    I am enjoying the Bender(and some beauty Bud)......looks like the Hercules is a metal Bender for oil...how can ya beat that!
  8. MaxVapor The Professor

    Message Count:
    142
    Location:
    On the edge
    It seems very similar, using the hammer as the heating element. This is an interesting direction which I think gives them a lot of opportunities for innovation. I do hope the 1701's work out though since I love the "instant on" vapor of the carts.
    NoName, jpdnkstr and Darb like this.
  9. Bugsy VapeHare

    Message Count:
    45
    Location:
    Great White North
    "Hercules is a Metal Bender".........get in touch with Metallica........G you can retire:rockon:
    Darb likes this.
  10. kittyboy Active Member

    Message Count:
    186
    hey G what is the total load amount u can put in at one time? and apoximately how many draws might one get from that? I thought I read about .3 per load and wonder how many draws before reloading>

    Really trying to understand if this thing can keep u going for a while or if it is one hit type situation?
    And with the purchase how many carts come with it meaning u can load several and carry them>?
    :wave:
  11. CheeseSandwich Member

    Message Count:
    80
    Location:
    New Brunswick, Canada
    Just received my Persei from Planetvape. Loaded a 5.0 cart with some bho and set it on 7.4v...
    Wow! i thought my ophos worked good:rockon:Can't wait for Hercules time!!
  12. THC SCIENTIFIC The Guy Who Created It All.

    Message Count:
    3,710
    Location:
    Los Angeles
    I load about .3 in it and hits per load are different for all. It will keep going as long as there is liquid in it.
    BLAZING OG likes this.
  13. CheeseSandwich Member

    Message Count:
    80
    Location:
    New Brunswick, Canada
    is using a 5.0 cart at 7.4v conservative at all?
  14. nickzzzx Active Member

    Message Count:
    196
    Location:
    Tallahassee, Fl
    Not compared to a 2.4 ohm cart at 3.7v. Compared to the standard ophos carts, it puts out almost double the watts which creates a lot more vapor and heat.
    At 7.4v, a 5ohm cart is more conservative compared to the 4 ohm carts...they're both very high powered though.
    OF likes this.
  15. CheeseSandwich Member

    Message Count:
    80
    Location:
    New Brunswick, Canada
    ok, i see. Didnt think to order any 2.4's or 1.5's when i ordered my persei:rolleyes:
    Oh well, big clouds it is for now, lol.
  16. kittyboy Active Member

    Message Count:
    186
    In your normal comparisons would the .3 give 10-20 30-50 good draws or more like 5-10?
    I found Dart burned quicker then your regular carts. I am just trying to understand if this will give a evening worth of use from one fill which your carts do, or if this is more filling as u getting bigger dabs?

    Does Herc work on principle the longer you hold the button the more product you vaporize? You stated above not toke for 7 second warm up. Can you hit several times after warming up or do you have to let cool down? (besides drawing after releasing button) Once warm are you able to hit button & draw immediately or should you always wait before drawing? (carts seemed to work best drawing before hittin button).
    Clean every three days is that with any amount of use? Or after you burn through 10g on avg?:science:
    Hell I dont brush my teeth every three days:shrug: Guess it would keep taste better by cleaning. Do the carts need cleaing between fillings or they take several fills before gunking up?
    will u hurt cart if empty and u fire it up? or product run out but u keep firing it up to get that last hit?:rofl:
    Dont want to burn the Hercules out but sounds indestructible....Keep up the great work.:tup:
    Thanks
  17. Bob Loblaw Astralnaut

    Message Count:
    1,824
    Location:
    NW
    you can also get the two small 3v batts for lower voltage, or get the iris to dial in voltage

    shot a vid of all my vape pens some cross company, but all together
    can't wait for the herc and iris to join

    should be loaded in an hour

    UpUpandAway, ataxian and OF like this.
  18. Porquiplane Look Into My Eyes

    Message Count:
    351
    Location:
    Wunderland, Overworld
    So when Herc is released (site says 11/15), would we expect it that day or within 3 days or whats the eta between release and receiving? still doing signature required?
  19. BLAZING OG Medicated 24/7

    Message Count:
    416
    Location:
    Sherman Oaks, CA
    1) If hercules was pre ordered first then iris top, will they ship together?
    2) do they require a signature?
    3)does any one know where i can buy a single male 610 to female 510 adapter (other than planetvape) ??
    any help would be much appreciated!!:bowdown::rockon:
  20. jambandphan03 Equal Opportunity Vaporess

    Message Count:
    4,204
    all my D-9 orders require sig.
  21. BLAZING OG Medicated 24/7

    Message Count:
    416
    Location:
    Sherman Oaks, CA
    my 2 benders did also, just making sure, thanks jam for the quick reply!!!! By the time i get off work they have already usually attempted to deliver, so my hunt begins!!!:o
  22. ataxian Well-Known Member

    Message Count:
    1,078
    Location:
    Southern California
    Bob you have "KAHUNA" status for sure.
    I'm really into this PERSEI MACHINE.
    This thing is so powerful!
    I can see where it can be an obsession.
    I need to be stealth in my medication.
    The PERSEI is fast and effective.
    Recently I have been watching to LINDA YOU TUBE VIDS.
    Her videos taught me how to use mine.
    I hold the battery side up and I get thick Vape clouds!
    GRAVITY is your friend!

    Bob Loblaw likes this.
  23. Bob Loblaw Astralnaut

    Message Count:
    1,824
    Location:
    NW
    electronic-cigz.com, under adapters, should be the first one, iirc

    thanks, man. actually, Linda is using it wrong. the heater is down by the battery, so by tipping it that way she is having the oil run away from the heater and towards the mouthpiece. i put a comment on her video, but she left it that way anyway, what ya gonna do. but who am i to tell you to do anything, if it's workin', it's workin'. glad you enjoy the video

    EDiT-
    also a big shout out to D9, THC SCi, W9, and/or UP. i got my HVDs back as well as two broke O-PHOS and 3 faulty persei heads back and in tip top shape. got all my gear back so it was time for a family photo!
    BLAZING OG likes this.
  24. Bob Loblaw Astralnaut

    Message Count:
    1,824
    Location:
    NW
    back to back posts, please delete
  25. OF Well-Known Member

    Message Count:
    7,877
    Location:
    Left Coast
    You know, Bob, I'm not so sure about that. The oil is really thick and moves slowly I think. And it's basically held in place by atmospheric pressure (how do you get air in 'above' it so it can move). It's like ketchup in a bottle. It's a short time thing, you can vape with the cart upside down for heaven's sake.

    Just make sure it's upright the majority of the time and I think you're good.

    I'm not going to tell Linda she's wrong, of course, bet you won't either..... I mean look at the things like loading in this video or many of her others that you know just aren't quite right.

    Besides which I don't watch her videos for their exacting technical details any more than reading Playboy for the latest in men's fashion or fine food......

    OF
    NoName, Zingbuddah and Bob Loblaw like this.

Support FC, visit our trusted friends and sponsors