1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

PAX 3 by PAX Labs

Discussion in 'Portable Vaporizers' started by Ojan_at_PAX, Sep 22, 2016.

  1. JCharles

    JCharles FC 06/06/2017 | ACMPR 26/07/2017

    Messages:
    450
    Location:
    Toronto, Canada
    Hi @Ojan_at_PAX

    I would really like a mode within the app for when I'm using a water pipe.

    The boost mode comes close, but it still let's the oven cool down by 5 degrees Celsius after a pull or two with a waterpipe and then auto offs.

    The lip sensing doesn't work with the water pipe adapter from Delta3DStudios.


    Really just a setting/mode that keeps the oven at temp and doesn't auto cool down or shutoff. Maybe a 10 minute maximum session time or something to prevent overheating


    Thanks!!
     
  2. sNc

    sNc Active Member

    Messages:
    42
    @Ojan_at_PAX any advice on damaged body repair for my unit please?
     
    JCharles likes this.
  3. Petrolhead_GR

    Petrolhead_GR Well-Known Member

    Messages:
    67
    I'm ready to pull the trigger... :D
    One question please: minutes of session per pedal ? 5min? 8 min? or something else about time? thanks for your time
     
    JCharles and sNc like this.
  4. sNc

    sNc Active Member

    Messages:
    42
    Depends how you feel on taste as the session goes on...personally I like flavour so keep it at minimum as much as possible but will step temp up once vapor and flavour starts to fade.(and also go back down again to revisit some terps)
    My sessions are rarely over 5-7 mins as I struggle with the flavour after that.

    Edit: you can probably spend 5mins on
    first petal but a bit less on the each next one after that.
     
    Petrolhead_GR and JCharles like this.
  5. gnajhar

    gnajhar Well-Known Member

    Messages:
    32
    Location:
    Brasil
    Hey! Thank you so much for this. Do you know the specs of PC USB 2.0 and 3.0 ports?
     
  6. mucsusn

    mucsusn 60 going on 20

    Messages:
    580
    Location:
    DC Metro
    USB 2 is 5V .5A
    USB 3 is 5V 1.5A
     
    gnajhar likes this.
  7. KingofWisdom

    KingofWisdom Member

    Messages:
    25
    Uh, I think my Pax 3 has a damaged oven. I think I waited too long to clean the screen and something went wrong. It'll probably still work, but I'm guessing the warranty won't save me? One side of the oven is really black.
     
    sNc and JCharles like this.
  8. JCharles

    JCharles FC 06/06/2017 | ACMPR 26/07/2017

    Messages:
    450
    Location:
    Toronto, Canada
    Keep at it - it will take a while to clean and scrape any gunk off but it will come loose with effort.

    Don't scratch the oven, but you can use your Pax multi tool and attack it with some Iso. And lots of qtips and folded up abrasive pipe cleaners
     
    ataxian and sNc like this.
  9. Mr. Me2

    Mr. Me2 Well-Known Member

    Messages:
    2,478
    Cleaning when the oven is warm helps. I find using a cake tester helps push out the screen.
     
    ataxian and sNc like this.
  10. sNc

    sNc Active Member

    Messages:
    42
    You can also soak some cotton wool in Iso and allow it to sit in the oven for a while this may help.
    If I have quite a bad build up in the airpath I will soak one of the pipe cleaners in Iso feed it into the tube and allow it sit for 10 minutes..makes it a lot easier.
     
    Brewervapesalot and Mr. Me2 like this.
  11. Trulukkyphrank

    Trulukkyphrank Well-Known Member

    Messages:
    61
    daaaamn!!! I just updated the app and my firmware on the pax and it now has new temp range starting from 175celsius! Thank you so much for listening!!! I can't describe how awesome this is!! Thank you so much!!!
     
    ataxian, sNc, blackstone and 3 others like this.
  12. Larrytargeteye

    Larrytargeteye Vapin' stevens

    Messages:
    88
    Location:
    England
    I just thought id let pax users know about the cheapest waterpipe adapter i could find.it cost under £10 delivered from ebay but you need either an 18mm to 14mm or 18mm to 18mm gg adapter as well. https://m.ebay.com/itm/Hookah-Glass...095303?hash=item3d53bff9c7:g:Pc0AAOSwTQtaOxqs
    All you do is push the 18mm gg adaptor in where the little watertool in the link would connect after removing the original glass water can and perc and thats your adapter made.just stick the 14mm or 18mm end in your water pipe and your sorted.half the price of the cheapest adapter i could find.
     
    ataxian and sNc like this.
  13. Dynavaper

    Dynavaper Karma Farmer

    Messages:
    1,073
    Location:
    Europe
    You know what? I lost my Pax 3 around two months ago and I thought that I have enough other great vapes, so that I would probably not care. But I missed it. Despite all the alternatives. So I ordered a new one today, black with matte finish. It's still my favorite conduction unit on the go and on my sofa.
     
    JCharles, ataxian, sNc and 7 others like this.
  14. 7oli5

    7oli5 Well-Known Member

    Messages:
    37
    I have been solely using my vapcap since it arrived a few weeks and decided to use the pax last night for a change. A different, but definitely equally enjoyable experience. When I got the M I felt sorry for spending 300 euros on pax but knowing it will last me 10 years and that it can be used where the M cant or at least isn't easy to be used, I am liking my investment all over again
     
    JCharles, ataxian, sNc and 3 others like this.
  15. natural farmer

    natural farmer Well-Known Member

    Messages:
    3,116
    Location:
    High in a Greek mountain!
    Vapcap has really changed the game for me as well! It's the only vape I can do mouth-to-lung hits cause of the high airflow restriction needed. All other vapes needing a straight -to-ling hit hurt my throat a lot and I can't do more than a couple hits usually. I even gave my Project Eraser to a friend.
    But the Pax... Oh, the Pax can do mouth-to-lung like a KING! The only battery powered vape that can do that for me so far! Not as tasty throughout the session but great feeling overall and I only had full ovens to test... So, once I can manage to spare the 250+€....... :brow::brow::brow:
     
    ataxian, sNc, Papa Woody and 2 others like this.
  16. ataxian

    ataxian PALE BLUE DOT

    Messages:
    11,505
    Location:
    Pacific Ocean
    I like the "M" a lot and use it all day long!

    Lately I'm looking for a new VAPORIZER (battery powered) I like the size of the PAX?
     
    natural farmer likes this.
  17. Southern Chef

    Southern Chef Well-Known Member

    Messages:
    136
    Location:
    Home of the Blues
    The Pax is a great vape...especially the 3. I love the thing but it gets skipped a lot in my rotation because of the maintenance it requires. I find that I need to do a pretty thorough cleaning every 3 or 4 uses.

    The Arizer products, the CFX and the Fury 2 get a lot more use because of the performance and easy cleanup.

    Lots of other great vapes out there....these are just the ones I lean toward these days.

    Happy hunting @ataxian
     
    Jill NYC and ataxian like this.
  18. ataxian

    ataxian PALE BLUE DOT

    Messages:
    11,505
    Location:
    Pacific Ocean
    I clean GLASS everyday.

    These daz's I need clean?

    I clean Vaporizer's every 2 weeks (12 x's per day +/-)
     
    JCharles likes this.
  19. Dynavaper

    Dynavaper Karma Farmer

    Messages:
    1,073
    Location:
    Europe
    The new Pax 3 has arrived. I am so happy. And that black matte finish is soooo much better than the glossy version! I love it! It looks incredibly good. :) And that new thinner loading dock is also nice.
     
    Last edited: Mar 27, 2018
    JCharles, natural farmer and Mr. Me2 like this.
  20. SMODomite

    SMODomite Well-Known Member

    Messages:
    99
    Been out of the portable vape game since the original Pax and owned an MFLB before that..Stopped using it mainly because I wasn't using it out and about often (not in a legal state) and felt when I did use it, I needed to rip through a full oven for decent effects. I am currently waiting on my medical card so now that I can have a vape with me where ever I go, I figure that is the best way to consume outside and not draw attention to myself. I am leaning toward pax 3 since I did like the pax even though it was a pain to keep cleaning sometimes, but didn't know if there are better portable options or harding hitting portables.
     
    vapeOR likes this.
  21. Tstat

    Tstat Dead Foot Designs Accessory Maker

    Messages:
    1,974
    Location:
    The Medical North East
    Pax 3 for $175, 420 sale. I think it’s time to upgrade from my Pax OG (1)!
     
    Papa Woody, vapeOR, KidFated. and 2 others like this.
  22. JCharles

    JCharles FC 06/06/2017 | ACMPR 26/07/2017

    Messages:
    450
    Location:
    Toronto, Canada
    I use my Pax significantly more than the DynaVap.

    I enjoy both but the Pax is better on the go
     
    vapeOR likes this.
  23. Papa Woody

    Papa Woody "The vapor is strong with this one"-Obi Onda Woody

    Messages:
    222
    And that’s for the “Complete Kit”...Excellent deal...
     
    KidFated., Mr. Me2 and Jill NYC like this.
  24. Jill NYC

    Jill NYC Portable Collector

    Messages:
    477
    Damned VAS. The $175 deal was just to good to pass up. My OG pax was awful, but I have tried the Pax 2, which was much better tasting, and everyone here has mostly great things to say about the 3 so... click.
     
    KidFated., Papa Woody and Mr. Me2 like this.
  25. SMODomite

    SMODomite Well-Known Member

    Messages:
    99
    Also ordered a pax 3 on the $175 sale, but that was after my brother already ordered his pax 3 off a different website having a sale for $200. He wanted the shiny gold one rather than the teal he ordered, so I ordered the gold and we are just going to swap em out so we both will get the colors we wanted and I only had to pay $175 not bad at all
     

Support FC, visit our trusted friends and sponsors