Discontinued Lily vaporizer by Triihouse

Thank you, just ol walnut. Need to post photos of my cherry Daisy too...

So yeah I posted about it here a while ago, but basically Solo stem seals up against o ring in Lily, but you have to hold it there in your mouth while you do it so a bit tricky but so worth it.

Once I got some silicone tubing from Amazon (forget my exact diameters but I posted em a few times in here somewhere... Definitely in the Cloud Evo thread) I was able to fit the Solo stem in on its own, but it is a bit tricky to get it in right so takes patience.

It really works great, true Mini Daisy, may actually be my favorite Lily stem overall

Found it after some specific searching. I knew I had read it somewhere

Forgot to add it for anyone curious:
Ah the joys of silicone tubing, the gift that keeps on giving. A piece of this new 1/2 inch diameter 3/8 inch interior 1/16 inch wall silicone finally allowed me to connect a bent Solo stem to Lily without having to hold it there

I've got an 18mm MP off my FC-278 and a lily WPA (+hammer!) coming within the week so I'm stoked to try it in your full on "daisy mode" as well.
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Alright Ed pushed me to it, so head over to his thread to see more Lily porn (I would paste that post's link here but am on mobile so won't be able to until later, perhaps someone else would be so kind to do it sooner...)

Anyway here is the photo not found there, showing my variety of Lily stem options (I actually have two other custom blown 18mm mouthpieces received after the pic):
cf4U8Bt.jpg

Heres the link to the post in Ed's TnT Wooden Vapor Tubes & Vapor Stems:peace:
 

Bizkat

Well-Known Member
Just been looking in to this;

Screens - Lily ½ inch very fine
Daisy ⅝ inch fine


O-Rings - Lily intake - BS012 (9.24mm inner/1.78mm thick)
Lily Mouthpiece / Daisy intake - BS014 (12.42mm inner/1.78mm thick)
Daisy Mouthpiece - BS214 (24.99mm inner/3.53mm thick)


The O-rings are standard sizes but only the Red coloured ones are Silicone and temp resistant - different colour O-rings are made from different materials and may not stand up to the high temps of the intakes although probably would be fine for the mouthpieces as the glass doesn't get hot.
Lots of good Daisy info on this thread too! Thanks.
 
Got my Lily WPA the other day. Game changer. The ID is a little off so I had to beef it up with some PTFE tape so the O-rings would grab. While I had the Teflon out I gave balled up a couple pieces to try and use as carb plugs. Works perfectly and won't leave any residue on the wood, this greatly simplified my water pipe usage.

Its also changed the game dry with the use of a J-hook or my FC278 mp. I don't own and haven't had the pleasure of using a daisy but this may be as close as I get. Ridiculous hits.. very cool vapor

My lily was seeing a bit less use after I killed the piezo in my favorite torch (for lily). I got super medicated and preformed some lighter surgery this morning and swapped piezos from a .99 cheapy disposable, and we're back in business! It feels like a new vape.
 
Got my Lily today -- planned on a Vapman for my next butane vape, but decided to jump on a Triihouse vape first since I heard the news of them going out of business. I ordered cherry, but it appears to be walnut (see photos: it was kind of too dark for the lily to even show clearly, so I messed with the images, not so successfully, and cats crashed the photoshoot, improving it). Whatever it is, it's fine by me, if a bit bigger than expected. I like the light streak on the bottom, and cats clearly approve. Now on to figure out how to use it!

EDIT: Well, use was super easy and effective. It's fun to use, too. The only thing I don't like is the strong taste of the wood finish...

And I think it's fair to say I definitely received walnut, not an extra-dark cherry.

IMG_1558_1.jpg

IMG_1557_1.jpg

IMG_1571_1.jpg
Beautiful photos, though the models outshine the product.
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
2 questions:
I've been using the lighter that came from vaporstore and it seems to work fine to me. Do I need more than that? My only negative on it is my thumb get's tired holding down the button. I'm fine with it, but I just don't want to be handcuffed by a crappy lighter and not even know it.

If it is a little lacking can I be lazy and ask if anyone has a good inexpensive lighter recommendation? I don't know anything about them and I'm not too interested into getting into that stuff and heavily researching it yet. Otherwise I'll go through this thread this weekend and see if anyone mentioned some. Got a surprise christmas bonus so I'm thinking of grabbing a daisy so I want to use my lily some more and think it over.
 
If it is a little lacking can I be lazy and ask if anyone has a good inexpensive lighter recommendation?
I actually bought these: www.dx.com/p/jet-1300-c-butane-lighter-1320 per users OF's suggestion for another vape but they just so happen to be the very lighters Tommy used to send out with all triihouse vapes. Mine only arrived last week but has been doing great. Honest, Zico and Xing torches are all excellent and inexpensive as well.

However I prefer a larger torch for the lily! Faster and less skill intensive as far as aiming goes. YMMV. www.amazon.com/Single-Lighter-Windproof-Refillable-Cigarette/dp/B00GA3U9XO/ref=pd_sim_121_5?ie=UTF8&dpID=41UTy05I59L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0AJGEA5JN80P3TJP4TAF I've been using one of these for months. You can even repair them easily if you've got the parts (I've bought a number of duds over time). I bought an individual for $7, but I figured I'd link the 4 pack for $14.

eb1f522c22.jpg

Preferred lily setup lately, my other j-hooks look a little more elegant but the little frit let's me have a little water fun without loosing the classic triihouse taste. Featuring my hands free PTFE carb plugs. :sherlock:
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ

This looks great, which size do you use for the lily? 14/20? I think that's .7 inches which is about 18mm, not sure if the lilly is 18mm. Also not sure my math is right.

I wanted to get a spare mp stem from that lily uk ebay listing that sells parts, but that was out of stock along with the water adapter. I might pick up some spare o-rings and an intake stem still just in case.

Also thanks for the lighter recommendations, I grabbed the 4 pack on amazon with some butane refills. I might just buy that other lighter too since it's about $2.
 
StormyPinkness,
  • Like
Reactions: nondarb
This looks great, which size do you use for the lily? 14/20? I think that's .7 inches which is about 18mm, not sure if the lilly is 18mm. Also not sure my math is right.

The 14/20 is 14mm, the 20mm is indicative of the joints length (they seem to label only labglass this way?). Which fits snugly in the MP hole with no o-rings.

Water lily is a real treat, I'm sure you'll dig it. Oddly though I still think j-hooks may be stealing the show. Maybe its more daisy like? Alas, I may never know..
 
Hey guys, been using my lily for about 2 weeks now almost exclusively. Definitely a fast favourite although i must admit the inital wooden taste almost put me off. Haven't yet combusted but have had many many hits that i could have sworn were burnt...


Have you got a link to where you got that j-hook? it looks very nice :)

I found some other ones here
http://www.ioffer.com/c/Pipes-1003521/18mm+glass+j+hook

I've tried water lily with my wee bubbler but i'm looking forward to trying lily with either the PNWT knock off or with a hydrotube from DHgate. Any videos from users with these tools would be very much appreciated also (shit snacks if you have time/can be bothered!).
 
VoltarsVault,
  • Like
Reactions: nondarb

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Hey guys, been using my lily for about 2 weeks now almost exclusively. Definitely a fast favourite although i must admit the inital wooden taste almost put me off. Haven't yet combusted but have had many many hits that i could have sworn were burnt...


Have you got a link to where you got that j-hook? it looks very nice :)

I found some other ones here
http://www.ioffer.com/c/Pipes-1003521/18mm+glass+j+hook

I've tried water lily with my wee bubbler but i'm looking forward to trying lily with either the PNWT knock off or with a hydrotube from DHgate. Any videos from users with these tools would be very much appreciated also (shit snacks if you have time/can be bothered!).

Its great with hydratubes (I find the real pnwt much better though, the knockoff was pretty poor, too small) I know steven79 has a circ tube now... Kathy's inline honeycomb is also great

But yeah no videos from me, sorry buddy ;)
 
Shit Snacks,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Posted in the Milaana thread and had to share these two little lovelies here as well...
Hdg0Z4N.jpg

I was worried about not having an extra mp stem if mine broke and wanted one to use while one during iso soaks, maybe I'll grab one of eds.

How does the reclaim/resin build up in those? The same as glass mps? I've never had an ed's before.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I was worried about not having an extra mp stem if mine broke and wanted one to use while one during iso soaks, maybe I'll grab one of eds.

How does the reclaim/resin build up in those? The same as glass mps? I've never had an ed's before.

Can't really say, hasn't seen enough use... yet, but it hits smoother than the standard glass mp
 
Top Bottom