1. What does SSTB mean? See our glossary of acronyms.

Da buddha dab kit (nail ? )

Discussion in 'Vapor Related Equipment' started by Abysmal Vapor, Feb 2, 2013.

  1. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    2,167
    Location:
    7th heaven - 666th pit
    [​IMG]
    Just saw on higher elevations glassblowers FB "says : Did you know you can know dab it up with Da Buddha Vaporizer?! The oil setup for it is $60! Come check them out today!! "
     
  2. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    907
    Damn wish I woulda thought of that!
     
    Scarylarry1 likes this.
  3. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    2,167
    Location:
    7th heaven - 666th pit
    So what do you think .. Is it a a ti-nail sleeve for the heating element :).. and what could be the possible benefits of controling you ti-nail temp ? End of dab combustion ?
     
  4. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    907
    I think it's a TI sleeve you can kinda see it in the pic, ultimately I think it'd be preferred mainly because you lost the "big intimidating torch" aspect of it, however you did bring up a good point, with careful knob working I suppose you would be able to get smokeless dabs...
     
    Roger D likes this.
  5. JSteez4205

    JSteez4205 aka Gordon NugzB

    Messages:
    283
    May have to buy a 2nd Buddha strictly for this oil setup...
     
  6. 2clicker

    2clicker up to my ears in clams Accessory Maker

    Messages:
    3,432
    whoa... very cool

    makes me want to rethink selling my DBV... :\
     
  7. Tweek

    Tweek Well-Known Member

    Messages:
    6,142
    I don't think it's Ti. Looks like a glass sleeve that fits over the ceramic element. Still kinda cool.:tup:
     
  8. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    i can't find this on their website :(
     
  9. Bouldorado

    Bouldorado Well-Known Member

    Messages:
    943
    Location:
    CO
    This is cool...I wish they made an lsv version; with a male joint and the opening on the side
     
  10. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    i think i may want one.... if i can find it
     
  11. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    2,167
    Location:
    7th heaven - 666th pit
    From the looks i think they have a batch in their shop , it is not on site thats for sure.. but if you are intrested i thing it is best think to shoot them an e-mail ;) Higherelevationmp@gmail.com


    • 1323 Paonia St
    • Colorado Springs, Colorado 80915
     
  12. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    i emailed them, and sent a message on their facebook page.... guess i will see if they reply. this thing looks very cool
     
  13. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    treeman and Abysmal Vapor like this.
  14. Abysmal Vapor

    Abysmal Vapor Shaman of The Pyramid of Orlin'Malah

    Messages:
    2,167
    Location:
    7th heaven - 666th pit
    GJ ! :) i wonder if that setup would work with other ceramic element hotsticks/vapes.. like hakko,herb iron,embyr, etc... and may be vaporbrothers ? (EV? )
     
  15. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    i am totally thinking about getting one for my DBV!! i am just curious on how it will actually work and how the nail sits in the dome. does the ceramic element just keep the nail at a constant temp to allow you to dab after dab (if thats what you want to do)?? also.. for the knowledgeable people out there... they are allowing you to add a ceramic flavor disc for to the package. what would that be used for???
     
  16. Tweek

    Tweek Well-Known Member

    Messages:
    6,142
    Hmmm, so it does come with a TI nail, very cool. Maybe they offer the disc for easier clean up? More even heat? Might not hurt to inquire, just incase it somehow helps the system work better. But I am assuming it is just an extra for those who want a ceramic surface. These discs are sold for the SSV as well, as a surface for oils.
     
  17. mrboote

    mrboote ...

    Messages:
    514
    Location:
    ↑←
    I would be nervous about doing a true nail dab straight shot through a tiny little straw. It would be very harsh and you'd have a nice oilslick on your front teeth. With the ceramic pad I'd imagine this functions more like a healthstone pipe, minus the butane, that's very nice.​
     
    SSVUN~YAH likes this.
  18. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    tiny little straw???
     
  19. Quetzalcoatl

    Quetzalcoatl SPACE GOD

    Messages:
    4,340
    Location:
    SDCA, 3rd Planet
    He probably means the little glass wand you can see sticking out. I think that would lead to the tubing, and would also hold the herb at the end under normal use.

    My problem with this is all my experience with oils tells me to keep the total volume of the piece small, and to have a bit of water filtration. I don't know how this could hook up to water other than with silicone tubing, which I don't have much of a problem with... except additional surface area for the oil to stick to. Some people report less potent/flavorful hits from larger pieces/more water filtration as opposed to, say, a little Beer Glass/Bates x Worm/similar sized pieces.

    Still, innovation is always welcome, and I love their approach!
     
  20. treeman

    treeman Well-Known Member

    Messages:
    208
    you could have a really short tubing (say 1 foot?) going into a small bubbler so that your not dabbing from far away. But, do you think you could also load a bunch of herbs and get a blend of sweet flowery vapor and intense concentrated dab vapor?

    EDIT: thinking about it, you definitely could, even if that wand doesn't have a screen you could simply replace with standard wand. . . interesting. Maybe tempereatures wouldn't match?
     
    Quetzalcoatl and mmenzie like this.
  21. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    i already have a short tube that i use when i use my bubbler. it is a short tube and one end is my wand and the other is the WPA adapter for my bubbler. i love it and use it all the time. all i would have to do is make another short tube and use it on this new wand they have for this kit and it would be a perfect size for dabing with water.

    as for the other part.... i don't see why you couldn't put a screen in the wand and mix dry herbs with a dab for what might be an awesome expierience... if you can get the temps right for both.
     
  22. FLskwat

    FLskwat VAPOLITICS!

    Messages:
    1,246
    Location:
    EU (FL towah)
    Be aware you are supposed to put the ceramic disk form 7th floor in the Ti Cup... not a nail!

    We should have a few soon and will review.
     
    farscaper likes this.
  23. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    the kit comes with a nail
     
  24. FLskwat

    FLskwat VAPOLITICS!

    Messages:
    1,246
    Location:
    EU (FL towah)
    Please read:
    "
    To finish the kit off, there is a small titanium cap that sits on top of your heater cover. Just drop a ceramic flavor disc and some flavored oil on top"
    That "cap" is not a nail...it has the shape of the top cup of a nail, period! And it is shaped & design to put a ceramic disk in it...
     
  25. mmenzie

    mmenzie My friends call me "Menz"

    Messages:
    1,714
    Location:
    New Windsor, NY
    ok.. so i mis-read... so shoot me. :\ but i don't thing the ceramic disc is necessary. i bet you could dab just like you do on a nail
     

Support FC, visit our trusted friends and sponsors