Moses Baca
Colorado State Reformatory #8755
Love your work! I see a Ti stem in my future, maybe springtime.
Custom CARBLESS VapCap Ti stems
- Thread starter stardustsailor
- Start date
Mono Loco
Well-Known Member
Silly me ... I just went to check it - HA! I'm curious about a few things.This one is available at the "Classifieds" section .
Cheers.
1) How long (how short?) did it last in the Classified section before it was purchased?
2) What was the price?
3) Do your stems include your own condensers and O-rings, or use DynaVap OEM guts? ... I tried to find that info. in the previous pages of this thread, but I get stimulus-overload and can't make it all the way through all the pictures ... overwhelming eye-candy ...I suffer from "premature e-stem-ulation!
-dab8-
Dyna-saur
No condensers, very artful carbless stems. Often but not always with stationary mouthpieces.
Mono Loco
Well-Known Member
Thanks, @-dab8- ... so, like the ones @mrb offers, you're saying these use the DynaVap OEM condensers, right (not that they run without condensers)?. My gosh, they sure are impressive! Both makers are doing awesome work ... like the woodies from @phattpiggie and @primitiveorganic ... how can anyone choose one over the other? I chuckled at a comment from someone recently, about how they bought a DynaVap to "save" money ... good luck with THAT, with so many "Gotta-Get-Me-One-of-Those" goodies here ... DynaVap Porn!
-dab8-
Dyna-saur
you can run both these and mrb stems without condensers if you have a mouthpiece that fits into a stem without needing a condenser to sit on. @stardustsailor often includes such a mouthpiece. Mrb stems do not include a mouthpiece, so you either need a condenser and spinning mouthpiece from DynaVap, or a stationary 3rd party mouthpiece from someone like @stardustsailor
I have 4 @stardustsailor stems, all without condensers, and 3 mrb stems, all WITH additional DynaVap condensers and spinning mouthpieces.
pxl_jockey
Just a dude
Welcome to FC! It’s a great place to acquire knowledge but you can pick up some bad habits here. As an example, if I may be so bold: I believe that you’re looking at the situation all wrong. After spending much time here, I’ve come to see it as an opportunity rather than a restriction. Here’s my perspective:
You don’t choose one over the other, you simply get one from each! And when you’ve got one from each, if you want, you can go back for seconds. Exercise extreme caution though, some folks just can’t stop!
That person might be me regarding the "Save" money when switching to VapCaps.
Welcome to FC! It’s a great place to acquire knowledge but you can pick up some bad habits here. As an example, if I may be so bold: I believe that you’re looking at the situation all wrong. After spending much time here, I’ve come to see it as an opportunity rather than a restriction. Here’s my perspective:
You don’t choose one over the other, you simply get one from each! And when you’ve got one from each, if you want, you can go back for seconds. Exercise extreme caution though, some folks just can’t stop!
Agreed and that's what I did and doing. Start of with doing as much reading as possible, then decided that you want everything because i'm too indecisive.
My to "acquire" list:
Induction Heaters:
- Flux Heater waiting listed
- PSM waiting listed - Update: just got word that my number has been called. (so excited)
- primitiveorganic/simrell collection - Ordered and hopefully on its way soon
- Phattpiggie - Ordered and will begin is journey stateside on Monday
- stardustsailor - Next on the list
Last edited:
Furnias
Active Member
Hi!! here a new owner of a vapcap M... but i think this gona cost me my salary... 
Read almost all the post, but have a few questions... how i can order a mouthpiece integrated stem? How works your own mouthpiece (i mean, with wich condenser). I want to be clear at this before i place an order
Thanks!!
Read almost all the post, but have a few questions... how i can order a mouthpiece integrated stem? How works your own mouthpiece (i mean, with wich condenser). I want to be clear at this before i place an order
Thanks!!
Furnias
Active Member
Man... you touch me with this... I´m a farmer in Galicia (northwest Spain) making wine and cultivating the wineyards in a organic way, and when the people say to me i sell the wine maibe too cheap, i always say: if i or my friends can´t drink my wine because the price, i´m making somethin wrong. The hapinest is not about money, but about peace and fairness
Un fuerte abrazo!
Notice :
lately I've been late on completing some orders ,either were placed from old or new FC members.
My wife is pregnant ,so I 've plenty of things to do ,right now.
More than that ,one of my wisdom teeth is emerging ( somewhat late I should say ,I;'m already 43 years old ! )
and the pain is causing me ,does not permit me to machine for long time .
Please do forgive me .
In the next days ,I will complete some orders already placed and then I will work on some new orders .
Thank you all, for your understanding .
Be safe .
Cheers.
lately I've been late on completing some orders ,either were placed from old or new FC members.
My wife is pregnant ,so I 've plenty of things to do ,right now.
More than that ,one of my wisdom teeth is emerging ( somewhat late I should say ,I;'m already 43 years old ! )
and the pain is causing me ,does not permit me to machine for long time .
Please do forgive me .
In the next days ,I will complete some orders already placed and then I will work on some new orders .
Thank you all, for your understanding .
Be safe .
Cheers.
almost there
Well-Known Member
Congratulations brother, that’s great news, on the baby that is, lol.
There is only one solution for wisdom teeth and that’s to get rid of those bastards.
Whisper
Well-Known Member
Congratulations on your wife's pregnancy! I wondered where you'd been, now I understand 
.
I had really hoped, that you were working on something special, as you are often experimenting
with new techniques.
Bummer about the wisdom tooth,(teeth). I wish you better luck than I had.
Good vibes to you!
.I had really hoped, that you were working on something special, as you are often experimenting
with new techniques.
Bummer about the wisdom tooth,(teeth). I wish you better luck than I had.
Good vibes to you!
mario
Well-Known Member
Congrats! I have one of your stems from a purchase off of Reddit. When I saw that someone was selling a Stardust, I had to have it. I have a mrb stem on the way as well. Using them back to back is going to be amazing.
Anyways, congrats again! And I can say that I absolutely love my piece even though I didn't order it directly from you. When you have time again and aren't ask sick, I'm sure that I will want to try to put in another order haha.
-dab8-
Dyna-saur
Congratulations!!! Sorry to hear you are in pain though. Hope you are feeling better shortly.
Just finished an order .
it was the first on the list .
It has a new style mp and it has a total length of 104 mm ( without the tip ) .
Quite long .
This mp gave m e some trouble while machining ,as i do not have a " ball turning " lathe attachment ,
thus it was made manually .
At the middle section of the stem tube the texture used is a coarse "wire -wrap" ,
while both ends are decorated with various rings .
^ Besides an XL "ROD" series stem ( green anodized )
---------------------------------------------------------------------------------------------------------------------
Please ,those of you that have placed an order ,do remind me by sending me a pm .
I've kinda lost track of my pms .
Thank you .
Cheers.
it was the first on the list .
It has a new style mp and it has a total length of 104 mm ( without the tip ) .
Quite long .
This mp gave m e some trouble while machining ,as i do not have a " ball turning " lathe attachment ,
thus it was made manually .
At the middle section of the stem tube the texture used is a coarse "wire -wrap" ,
while both ends are decorated with various rings .
^ Besides an XL "ROD" series stem ( green anodized )
---------------------------------------------------------------------------------------------------------------------
Please ,those of you that have placed an order ,do remind me by sending me a pm .
I've kinda lost track of my pms .
Thank you .
Cheers.
Last edited:
Navyblueboss
Well-Known Member
Did anyone hear anything from stardust lately? It's like he disappeared.
Navyblueboss
Well-Known Member
Yeah I had the same thought, very strange so all of a sudden. Hopefully nothing happend..
cybrguy
Putin is a War Criminal
I hope that is all there is to it and that he will be back. Wanting to concentrate on his new daddyhood is, of course, admirable.
It's just that his disappearance was so abrupt and complete that has me concerned.
There are those that refer to me as Mother so there is also that...
It's just that his disappearance was so abrupt and complete that has me concerned.
There are those that refer to me as Mother so there is also that...
Squiby
Well-Known Member
He's back! 
http://fuckcombustion.com/threads/vapcap-custom-titanium-stem-goldfinger.45355/
Welcome back @stardustsailor we missed you!!! Looking forward to seeing more of your wonderful creations!!!
http://fuckcombustion.com/threads/vapcap-custom-titanium-stem-goldfinger.45355/
Welcome back @stardustsailor we missed you!!! Looking forward to seeing more of your wonderful creations!!!
Whisper
Well-Known Member
He's back!
http://fuckcombustion.com/threads/vapcap-custom-titanium-stem-goldfinger.45355/
Welcome back @stardustsailor we missed you!!! Looking forward to seeing more of your wonderful creations!!!
And with a bang! Beautiful, as always.
Hello to everyone !
As you may know I've became the father of an awesome baby-boy !
That's why there's been quite of time since my last sign in .
Well,I hope that I will find some time ,from now and on .
Cheers !
As you may know I've became the father of an awesome baby-boy !
That's why there's been quite of time since my last sign in .
Well,I hope that I will find some time ,from now and on .
Cheers !