1. What does SSTB mean? See our glossary of acronyms.

Arizer Solo

Discussion in 'Portable Vaporizers' started by Rockwise, May 27, 2011.

  1. tdriver

    tdriver Well-Known Member

    Messages:
    39


    I just received mine, it's a M1E1 ,first thing I noticed, it's small!!!

    it charges faster than I read older models do.
    fully charged in an hour +something (led was @3 initially)

    and as promised my report about the o-rings:
    (although it may not be needed yet)

    all the above o-ring sizes fit but the 14 X 2.00mm (metric) fits best with the less pressure when the cap is fully closed. (not to worry about stripping the threads)
    I can lift the unit from the stem without falling.

    will do my first session later.....hope for the best....

    ....more later
  2. Maine420

    Maine420 GROOVY GRANNY

    Messages:
    170
    Location:
    Right Coast
    It may be the charger that came with it. It happened to my M1D2. Luckily I have the charger from my M1A model, usable with my new Solo. You can order chargers on eBay.
    OF, CarolKing and poonman like this.
  3. gbetter

    gbetter Member

    Messages:
    40
    Does anybody know if the car charger let's you use 2014 solo while charging? Can't get a straight answer from anybody.

    Thanks.
  4. poonman

    poonman Well-Known Member

    Messages:
    1,583
    Location:
    Toronto , Canada
    If your 2014 Solo has the pass-thru capabilities (Charge & use ) .
    Then , I can't see why not . The upgrade was within the Solo itself to recognize function , nothing to do with chargers or PA .

    hope that helps
    CarolKing and sundaddy like this.
  5. gbetter

    gbetter Member

    Messages:
    40
    Is the thin or regular o rings best with M1D2 model?
    Just about to order.
    Thanks.
  6. spoutti

    spoutti Well-Known Member

    Messages:
    176
    Location:
    Montreal
    I have 2 solos with o-rings that doesnt screw all the way back. For over 8 months and it aint a problem for me. I just dont try to screw it completly. I can put my solo upside down and the stems stay put (i always feel one day it will fall, but didnt yet). It adjust the airflow of my pvhes to a charm. The only "problem" is my cap loosen up when on the go and i have to recenter my o-ring. It doesnt unscrew totally, just enough to let the oring wiggle inside.
    Alex43rd and CarolKing like this.
  7. DDave

    DDave Vape Wizard

    Messages:
    1,079
    Nice!

    I do hear the call for His and Hers Solos! Anyone second the motion? :rockon:
    hoptimum, Loo Entis, jasong and 5 others like this.
  8. sundaddy

    sundaddy Well-Known Member

    Messages:
    371
    His, Hers, and one Backup!
    DDave, jasong, Maine420 and 2 others like this.
  9. hd_rider

    hd_rider Well-Known Member

    Messages:
    72
    I second the motion, but only if her solo is PINK !
    DDave and poonman like this.
  10. CarolKing

    CarolKing Singer of songs and a vapor connoisseur

    Messages:
    1,329
    Location:
    left coast
    Out of habit I go to my sweet spot of heat levels 4 and 5. Today I have been experimenting starting out on level 2 then go on to level 3 and work my up to 5. I get a decent amount of visible vapor at heat level 2 and it has a nice flavor. I checked my older model and had similar results. The two units seem to be pretty much the same except for the use while charging and the long battery time. Also the ease of the draw, stock stems works great with the unit.

    Those of you considering getting the PVHES glass mouthpieces and you have ordered a new model Solo and haven't gotten it yet. IMO I would wait to see if you even need the PVHES mouthpieces. The ease of the draw is sooooooo good.
    Good Times
    Loo Entis, DDave, Gray Area and 4 others like this.
  11. jasong

    jasong Well-Known Member

    Messages:
    180
    That would be great if solo would make more colors or a wrap
  12. Quetzalcoatl

    Quetzalcoatl i i i

    Messages:
    4,192
    Location:
    SDCA, 3rd Planet
    I've been wanting a sort of shell case for it, not too thick but enough to protect it. Maybe a silicone skin or something? Just don't want it getting scratched up and stuff. Wraps would also be nice, if you remove the screws from the bottom I believe you can detach the metal housing to wrap and cut around, then the cap screws off. I have a silver one and wouldn't mind a matte black or something... lots of wraps and pretty cheap too!
    CarolKing likes this.
  13. Haymaker94

    Haymaker94 Member

    Messages:
    22
    is there any way you can pick which model type you want your solo to be? or is it kind of a toss up?
    When purchasing I mean
  14. king krish

    king krish Active Member

    Messages:
    42
    What glass are people using with their solo these days?

    I have been using a PNWT since i got my solo and want to try something new. What do people recommend?
    Quetzalcoatl likes this.
  15. Quetzalcoatl

    Quetzalcoatl i i i

    Messages:
    4,192
    Location:
    SDCA, 3rd Planet
    I have a sidecar bubbler, a beaker bong with a showerhead, and a small thin oil tube. Love all of them for different reasons.
    king krish, poonman and CarolKing like this.
  16. poonman

    poonman Well-Known Member

    Messages:
    1,583
    Location:
    Toronto , Canada
    It def. couldn't hurt to contact the vendor and specify which model # you're looking for .

    in my case ;
    I'd contacted Randy from Puffitup , and specified , that I wanted the SS bowl and Not the Ceramic bowl . ( 2 1/2 yrs ago )
    It was complied with and no issues . I will be doing the same thing with the newer pass thru models , b/c there seems to be a few older models out there still .
    Haymaker94, Quetzalcoatl and ataxian like this.
  17. 420time

    420time Well-Known Member

    Messages:
    481
    Location:
    ny
    ataxian and poonman like this.
  18. Haymaker94

    Haymaker94 Member

    Messages:
    22
    Is there a significant difference between the SS bowl and the ceramic? I remember reading that the ceramic bowls used to chip, does that still happen? Im a little leaning towards a SS bowl just for the fact that it seems less iffy to me after hearing about that issue, but I know I'd be giving up better quality vapor that would come from a ceramic bowl, no?
  19. al bundy

    al bundy Vaporist

    Messages:
    603
    Location:
    S.I.N.Y.
    I don't think they make the ceramic anymore. They're all ss, Even the ceramic one was a ss ,ceramic coated,bowl I believe.
    I'm trying to decide on the m107/m1a1 or the pass through, don't like the idea of the battery constantly starting to charge when the heater goes off . I guess I could always just charge and use the Pipes pa for power and treat it like a m107.
  20. rayski

    rayski Well-Known Member

    Messages:
    288
    You're not going to be able to get a new Solo with a ceramic bowl. Maybe used. The bowls have been SS for over two years.
    CarolKing and Haymaker94 like this.
  21. CarolKing

    CarolKing Singer of songs and a vapor connoisseur

    Messages:
    1,329
    Location:
    left coast
    No problems with vapor using a stainless steel bowl in the Solo. You get vapor from level 2 and up. I would recommend Puffitup $160 for a new Solo, and they ship internationally. You will get very good after care, that's very important.

    I suppose there are some old Solos floating around with the ceramic bowl maybe in far flung areas on Earth, or folks selling secondhand. They discontinued the ceramic bowl some time ago.

    Someone was asking about the Solo car charger. You can use and charge at the same time.
    Last edited: Feb 21, 2014
    Haymaker94 and poonman like this.
  22. ataxian

    ataxian California

    Messages:
    5,389
    Gray Area, Quetzalcoatl and CarolKing like this.
  23. Torontoke

    Torontoke New Member

    i sent it in to vapeworld. they paid for my shipping. they said theyll be fixing or replacing it with a new unit theres multiple issues with it ive even uploaded several videos on youtube. ill share them via pm if you want
    Quetzalcoatl likes this.
  24. DerekLM99

    DerekLM99 Member

    Messages:
    20
    For those of you wondering about the outcome of buying a Solo from Vaporseller.com, I just received mine!
    I believe I ordered Sunday, and I received it today (Friday). Monday was a holiday so there was no shipping on that day. They send in decently safe, tight packaging by 2-day priority mail for no extra charge (Atleast thats what it says on the package, but I recieved it on Friday). I paid exactly $125, not a penny more or less. It's also the latest M1E1!

    Man this thing is sexy in person...

    EDIT** Just checked their site again and it's priced $131.99 now.
  25. Quetzalcoatl

    Quetzalcoatl i i i

    Messages:
    4,192
    Location:
    SDCA, 3rd Planet
    Sweet, $125 for the newest model is one of the best deals I've ever seen on one.

    Anyways tonight I hooked up the Solo with my beaker bong, except with tubing and not directly. The hits are smoother this way!

Support FC, visit our trusted friends and sponsors