Discontinued Zion vaporizer

RastaBuddhaTao

Well-Known Member
Manufacturer
I'm gonna guess 4/15
That way u can have it on 4/20
Hopefully
No that would be a terribly scripted date but yeh Let's say 420 and I will do my Jah's honest best to land at least a handful with the faithful a few days before that. I'm an under promise and over deliver type of guy.

Temperature profile optimization is going well. I haven't had a unit instrumented since before the 2x4 and have been making changes based on feel. Now that we are dialing it in high speed thermal couples have been ordered for tomorrow delivery. Now I will be able extract exact time to temperature data so I can generate some curves for all to digest. I work better with pictures.

Round numbers it's inder 2 seconds to get to temperature once warmed up but let's get precise here. ;)
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
No that would be a terribly scripted date but yeh Let's say 420 and I will do my Jah's honest best to land at least a handful with the faithful a few days before that. I'm an under promise and over deliver type of guy.

Please don't do this to yourself (or us). There is no way to do a proper beta test and get units out there with any adjustments necessary before 4/20. Either it won't happen (cue the disappointment) or the units shipped will have flaws (cue the disappointment).
 

RastaBuddhaTao

Well-Known Member
Manufacturer
Please don't do this to yourself (or us). There is no way to do a proper beta test and get units out there with any adjustments necessary before 4/20. Either it won't happen (cue the disappointment) or the units shipped will have flaws (cue the disappointment).
Good point. To reiterate what was stated earlier in the thread. These units are Not production units. These units are an extension of the beta test fleet and will have there flaws and quirks. I will be explicit in what the units are and what the warranty is. These units are meant for expert users who want to be part of the fine tuning. I will cover this at time of purchase. The 100 will be metered out 10 or 20 at a time to ensure no problems get out of hand. Let's discuss this in our Beta team PM and get back to the forum with a decision :)
 

delloy

Well-Known Member
Im getting quite excited here now about this. THE DAY will soon be dawning and the thud of a package arriving on my doorstep seems near. Hoping you can still sort something for non US members who signed up @RastaBuddhaTao . Keep up the great work ;)
 
delloy,
  • Like
Reactions: VegNVape

Melting Pot

Sick & Twisted
Good point. To reiterate what was stated earlier in the thread. These units are Not production units. These units are an extension of the beta test fleet and will have there flaws and quirks. I will be explicit in what the units are and what the warranty is. These units are meant for expert users who want to be part of the fine tuning. I will cover this at time of purchase. The 100 will be metered out 10 or 20 at a time to ensure no problems get out of hand. Let's discuss this in our Beta team PM and get back to the forum with a decision :)
Zion don't listen to him he's a robot he is still plugged into the Matrix. Lol just kidding Pak
I am already a guinea pig for the medical community I would gladly be the guinea pig the vapor community please let me be apart of this.PM me any info don't want to miss out.and it is a honor to have input on a great Vaporizer.
Portable log :rockon::rockon::rockon::rockon:
:clap::clap::clap::nod::tup:
Excited that just means your heart rates up.
I'm over here changing sheets!!!!! Lol
I don't care I'll do what ever it takes u know I just had open heart surgery don't u feel sorry.:lmao::lmao::rofl::lmao::rofl::mental::worms:
 
Last edited:

RastaBuddhaTao

Well-Known Member
Manufacturer
To be fair to Pak, if he gets his unit next week and feels that there are things that need to be addressed before we start shipping the 100 we will delay launch. That is why I we beta test. In my humble opinion I think it's ready for the FC super users
 

VegNVape

Increase the Peace
Company Rep
Zion don't listen to him he's a robot he is still plugged into the Matrix. Lol just kidding Pak
I am already a guinea pig for the medical community I would gladly be the guinea pig the vapor community please let me be apart of this.PM me any info don't want to miss out.and it is a honor to have input on a great Vaporizer.
Portable log :rockon::rockon::rockon::rockon:
:clap::clap::clap::nod::tup:
Excited that just means your heart rates up.
I'm over here changing sheets!!!!! Lol
I don't care I'll do what ever it takes u know I just had open heart surgery don't u feel sorry.:lmao::lmao::rofl::lmao::rofl::mental::worms:

Ha ha! Seriously, no one can blame a guy for trying! I guess if you've got a card, may as well play it ;)

Fair play @Melting Pot :)

:peace:
 

RastaBuddhaTao

Well-Known Member
Manufacturer
Any news for non-US residents?
Customers on the Zion 100 list will receive units given the development nature of the units. Production units will be US only at time of launch. Plans are being generated to obtain CE and CSA certifications.

Great learning out of a ton of testing the heater temperature profile with MrP yesterday. Materials arrived today to tune the thermal mass of the unit. There are so many variables... Draw speed, draw flow rate, single user, multiple user, screen pressure drop, load density... Goes on forever... Thow in the rapid ramp up and ramp down and it's nearly impossible to accurately measure and characterize. So, I am back to providing a "just above golden brown during an aggressive two person session" rather than chasing the magic 440 max temperature. This device is far to organic to generalize it's performance with a number. Everyone will find there own place on the dial.
 
Last edited:

cybrguy

Putin is a War Criminal
So sometime last night when I was quite medicated I brought out the 3D PDF rendering of the Zion that TKW gave us a while back to entertain and impress us (worked, btw). So as I was listening to some music I found myself sitting there rotating and flipping the image like a video game for at least 30 minutes (maybe more) and then finally pulled myself away and went on with my evening.
So, this morning when I sat down at the puter the image was still up there and I found myself playing with it for a minute or 2 UNmedicated.
And I imagined "If a 3D image of the Zion can keep me entertained for a while, imaging how I'll feel about the REAL Zion".
Then I had some Yogurt. ;)
 
So sometime last night when I was quite medicated I brought out the 3D PDF rendering of the Zion that TKW gave us a while back to entertain and impress us (worked, btw). So as I was listening to some music I found myself sitting there rotating and flipping the image like a video game for at least 30 minutes (maybe more) and then finally pulled myself away and went on with my evening.
So, this morning when I sat down at the puter the image was still up there and I found myself playing with it for a minute or 2 UNmedicated.
And I imagined "If a 3D image of the Zion can keep me entertained for a while, imaging how I'll feel about the REAL Zion".
Then I had some Yogurt. ;)

Yeah, but what kind and flavor of yogurt? That's really what's at issue here.
 
TheDudeNextDoor,

cybrguy

Putin is a War Criminal
I'll take your word for that...

So @thekarmawhore , is there a new PDF that includes the cap? Just wondering...

And @RastaBuddhaTao Are Pak and Kero's betas nearly ready? And...and...and...

Getting a little breathless now.
 
Last edited:

thekarmawhore

Well-Known Member
I suppose we're far enough along to update you all with a new 3d pdf. Would you rather have the lid on or off? Stem shown as in use or as in storage? Both side by side? The "100" knob or the production concept knob?

Here's the latest "concept" full production unit with both the fire button and the temp control knob fully recessed. Slick.

1s2ngbva19mp43y6g.jpg



your pal,
thekarmawhore
 

MrPeanut

Zion, stealing faces since 2015
Happy Easter everyone! My 2x4 is still plugging along. It is getting double use now. I am still roasting 6-10 sessions a day and I am using it for my e-liquid vape as well. One drop of "juice" on a spent load and you get some great vape hits. I will prob look into some kind of cotton filter to drop my e-juice on in a separate stem. I was a bit worried that the juice would drip into the heater but as long as you are not over saturating the chamber no drips. So this thing is running basically non-stop all day. I got to help bench test some of the heater refinements with RBT Thursday and I think it shows. I also got a glimpse of some other concepts that will have some folks drooling, "literally." :science:
 
Top Bottom