Ascent Vaporizer by DaVinci
- Thread starter Davinci_vaporizer
- Start date
-
- Tags
- battery powered
Silvercloud538
Well-Known Member
After getting confirmation from DaVinci ,there will be no
anticipated '"changes"' to current model Ascent ,only additions to product line
~ on that news me decided a *'"2nd"' unit would be apropo as a standby for wait
time if 1st unit ( just bought ) crashes ~ all in all ,seems a good ,supplemental
investment ( can always resell 2nd unit ) ~ new unit ( carbon fibre ) will pair
nicely w/ stealth blk.
Psst* sale is on thru the 1st ,but office will be closed ,soo ,today's last day to cash in ~ Vape on '
anticipated '"changes"' to current model Ascent ,only additions to product line
~ on that news me decided a *'"2nd"' unit would be apropo as a standby for wait
time if 1st unit ( just bought ) crashes ~ all in all ,seems a good ,supplemental
investment ( can always resell 2nd unit ) ~ new unit ( carbon fibre ) will pair
nicely w/ stealth blk.
Psst* sale is on thru the 1st ,but office will be closed ,soo ,today's last day to cash in ~ Vape on '
MrNaturalAZ
Tree hugging dirt worshipper
Yep - just power it off and back on to return to manual mode.
KidFated.
Unknown Member
Power off the whole shabang or just the heater?
MrNaturalAZ
Tree hugging dirt worshipper
The whole thing... the button on top next to the mouthpiece. When you turn it back on it will be in the default normal mode. If thre is any other way to exit the programmed sessions, I don't know about it, but I don't think there is.
vapen00b
Many vapes & accessories. Always happy to help
Thanks a lot for your infos. I surely will read the last pages 20-25 pages...as I always did, but now the thread has (luckily) gotten sooo big. But I'm willing to learn!
Basically I question, if the Ascent is suitable for me and the purpose of not filling it too much... guess about 0.1 would be my load... maybe even less. (Don't wanna be blasphemic but would a Pinnacle Pro be "better" then?)
What I learned is to get glass flowers. Too bad in the EU I haven't seen an online store selling these... is there an alternative?
Do I have to grind to get better results or is it ok to just drop a lil bud in the bowl? (I'd prefer that.. am used to it with the vaponic pen. Talking about that amount of herb fitting in that thing)
Also I learned to get a better stem cause of the air leaking when pulling the glass them out... the less the better. But what about the electronic parts getting heat and air then..? Does it taste bad - and more importantly: its gonna be bad for your health..?
Would love to get an WonG from EDs - but guess I'm not gonna get it shipped since I'm from G-many. ;(
The 14mm GonG adapter would be also nice - to get an optional water adapter (but thats not important right now... something to try later on).
That's my thoughts for now...
Thanks to all of you helping and a happy new yeehaw!!
Silvercloud538
Well-Known Member
QUESTION : Have noticed a "quirk" in anti-motion auto-off function ~ when unit
rests @ 45 degrees ( ie., leaning inside coffee mug ) ,it '"does not"'
shutoff ,but
as soon as unit is vertical/ horizontal normal
function occurs ?
Has anyone found same phenomenae ,or is this normal ?
rests @ 45 degrees ( ie., leaning inside coffee mug ) ,it '"does not"'
shutoff ,but as soon as unit is vertical/ horizontal normal
function occurs ?Has anyone found same phenomenae ,or is this normal ?
Last edited by a moderator:
cornwalis
Member
Mine shuts off while I'm I'm in motion I thought so to as long in motion it does not shut off. I press the menu the + here and their inbetween draws seems to stop the shut off also set my vape cycles to one set temp and max the time on each you get a lil more time out of cycle think timer is 20. And all 3. Vape cycle = 30
Silvercloud538
Well-Known Member
Ya might wanna do a "reset" to clear/ reboot ~ press all three buttons
simultaneously @ 7 sec ~ then you will notice auto-clock reset @ 10 min /cycles
reset @ 375/ 3.00 min ~ this should get you good to go ,if not
,would check w/office
OF
Well-Known Member
I'm not at all sure we're interpreting "motion" right. At least not the same as the author. That is I'm not sure there's an accelerometer in there to sense motion. Extra expense and calibration issues I'd think. How do you separate say sitting on a moving car seat from a stoner watching a movie?
Rather I think 'change' makes more sense? That it 'it shuts of XX minutes since the last change'. It should be easy enough to sort out with a few tests, but my first one (setting a time to shake it every 5 minutes) didn't stop shutdown so I decided it didn't mean what I thought and stopped testing.
When I've got a few hours where I'm doing something else keeping me close perhaps I'll try it (setting times and temperatures to lower levels probably), if someone else doesn't do so first?
OF
Rather I think 'change' makes more sense? That it 'it shuts of XX minutes since the last change'. It should be easy enough to sort out with a few tests, but my first one (setting a time to shake it every 5 minutes) didn't stop shutdown so I decided it didn't mean what I thought and stopped testing.
When I've got a few hours where I'm doing something else keeping me close perhaps I'll try it (setting times and temperatures to lower levels probably), if someone else doesn't do so first?
OF
Silvercloud538
Well-Known Member
Having limited engineering background ,me thinks designers put '"any"' position as motion unless horizontal/ vertical mode ~ there must be a thermocoupler or something that utilizes A.I. ( artificial intelligence ) ~
@ OF ,forgive my ignorance of any politically incorrect nomenclature
OF
Well-Known Member
Could be. Such 'electronic levels' are broadly classed Clinometers. They tell you, for instance, how close your ship is getting to tipping over..... Many accelerometer sensors also provide this information as well. But I'd think they'd have the same separation issues?
This too should be easy to test for, and making the timeout short can make the testing go faster.
No need to worry about terms, we're communicating just fine. In fact I'm probably more in danger of losing readers than you......
OF
Silvercloud538
Well-Known Member
Your interpretation sounds more than reasonable ~ hav been doing test trials @
30 sec ( it seems whatever they're using it's verry consistant ,which satisfies
most quality control/ effective features )
After considerable comparisons ,hav found most effective to go '"direct"' to max
temp w/ in range ( ie., 385-400 ) ; then after proper warmup for a min or so ,set
cycle to next '"lower"' set temp ,and finally to min pre-set @ max mins which by
now will be lung effective while still savoring taste @ lower temps ~ VAPE on :-)
Last edited by a moderator:
cornwalis
Member
2015 why are their such junk sensor even in the machine I'd like to see the ascent stay and have it evolve with add convection longer internal sleeve that holds the lower stem so it insets into the top stem by by air leek just tweek it and take all the criticism you can complaints make for better products and better solutions oh and pole love removable batts not cause they can pop them out and replace when they die because wee all know bateries kik the can with out warning and user serviceable batt means I don't have to ship it to you in usa Ya I've tried going to high temps the popping it down I just find their sum thing missing in its use medication wise it's take a lot to use n has learning curve to use with friends with out of them all their only 1 that can manage getting a good haul I've got another portable I just bought for that reason and the easy of use driving or ridding bike
Last edited:
Silvercloud538
Well-Known Member
Prolly under the presumption that "convection" radiation will require more
energy toengage than "conduction" ,thus putting pressure on charge cycle
,IMO ~ But ,yes the squeaky wheel usually gets the most attention ~
cornwalis
Member
Yes it would but they both have their draw backs but also take a lot of juice too to get ceramic glass to temp but the convection would not be full on its to remove the shock of fresh cold air decressing the temp of said ceramic it might make up in loosing all that thermal energy in the bowl t consumes power but if that power loss was redirected to a pree warmer is it realy using more power or the same amount would diminish the need for stiring with every time you open bowl stir its uses more power to rever the heat their more factor that just its another burner use more power but it's the waisted energy you can redirect and make it useful in another place eliminate said loss and maybe eliminate sum stiring and wear on that bown seal as the charge cycle you're worried about that because you cannot pull the bateries out would of been cool if the lower stem actualy lowered onto you're load pushing it to the bottom locking it closed unable to open in down poss
Vaporcussion
Well-Known Member
Hey Carolking, thank you for your great posts all through this thread! Curious if you think Ed's blackwood stems have a better draw then then the glass stems? I heard they have one big hole with a screen as opposed to the 3 small holes in the glass, thanks
Silvercloud538
Well-Known Member
Just curious ,do you find the flowers having any inverse/ messy effect on wax/
shatter additives ?
cornwalis
Member
I don't like using um makes a dam mess net resin on um carry a container with um and that's gets coated with crumbs and resin my buddy's unit has a few nicks on the lowers seal says flowers get wedged in their their pointy small and feels special when you drop um on the floor step on um I put oils n shatter in my the can drop in and crank it just with no lid they always come poppin off on me lids are useless Imo if I do continue to use it will be for reclaim n oils N maybe off shelf cheep herbs maybe if they where stiffer or stiffer with just tool hold so and the tool could be shaped so it can push the jar lid on and pull it out oh ya clean oil too no fine particle or find get a burn taste And don't work too good the pollen I get out of my grinder I heat n press it and it's usaly has plant mater so I drop it right in the bowl and don't seem to melt or make mess but got to know what yer doing I've dabed a tinny bit of shat or oil on the walls just enought to stick and not drip and keep it slight tilt but again tricky but get good results the next unit will have shortfalls erased I'd realy like to try a solo never have befor might be the next thing
CarolKing
Singer of songs and a vapor connoisseur
I took advantage on the sale prices at Davinci on glassware. I was able to get 20% off plus another 10 off for a total of 30 percent off my total order plus free shipping. A very good discount.
The sale is still on through Jan 1st. hurry before it's over. Glass breaks easy.
The sale is still on through Jan 1st. hurry before it's over. Glass breaks easy.