Ascent Vaporizer by DaVinci

F

farcus2323

Member
I purchased an Ascent about 2 months ago, my first one just stopped working but there customer service all though slow, was great and quickly sent me a new one. I have mixed feelings though, I feel that the high just does not last good. Also it uses a ton of bud, When I use a little amount it just does not seize to amaze me. My Ascent is just not doing it for me.
 
Last edited by a moderator:
farcus2323,
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
farcus2323 said:
I purchased an Ascent about 2 months ago, my first one just stopped working but there customer service all though slow, was great and quickly sent me a new one. I have mixed feelings though, I feel that the high just does not last good. Also it uses a ton of bud, When I use a little amount it just does not seize to amaze me. I am contemplating on selling my Ascent. It's just not doing it for me.
Click to expand...

Have you tried reading through the pages of this thread? Many folks felt like you. It takes a while to sometime catch on to this vape. Practice and some education may help.

Read through Nigel and Of's posts, it helped me.
 
F

farcus2323

Member
Yeah I have read this threat before i purchased it, after i purchased it. My first unit I thought was defective because I was not getting a thick vapor, but I learned to draw slower and longer. It just upsets me by how much herb I have to use to feel up a full bowl. I dont like using cotton because I feel like it gives off a weird taste sometime. The temps I use are usually 386, 410, 420, 430.....Maybe I am taking pulls too quickly apart. Maybe need to wait longer for chamber to produce more vapor.
 
farcus2323,
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
farcus2323 said:
Yeah I have read this threat before i purchased it, after i purchased it. My first unit I thought was defective because I was not getting a thick vapor, but I learned to draw slower and longer. It just upsets me by how much herb I have to use to feel up a full bowl. I dont like using cotton because I feel like it gives off a weird taste sometime. The temps I use are usually 386, 410, 420, 430.....Maybe I am taking pulls too quickly apart. Maybe need to wait longer for chamber to produce more vapor.
Click to expand...

Waiting will help a bit. My advice is not to fill the bowl, and to use the glass oil jar as a spacer. I normally load .07 g this way.
 
Osn Dosn

Osn Dosn

Well-Known Member
Do that, wait ~30secs between hits.

And you don't have to fill the full chamber to produce decent vapor imo.. ~0,2 is enough, just put it down slightly. For less or slightly better overall results think about the glass flowers.

Me don't likes the glass jar though.. too much resistance, bad vape imo.
 
F

farcus2323

Member
Yeah I just only get maybe 5-8 hits when I use like 0.2-0.4. I am going to try it again here in a few with the oil jar as a spacer. What is the consensus starting temp? 386? Or does it need to be higher since I am going to use less herb? I am currently cleaning my glass pieces.

Sorry, I am new too this. Although, I have read the thread for a LONG time I have never posted until today. I have another question, Should I grind up my herb with grinder or try and break up with hands. Do you all find that chunk of herb work better? or when its more like wet sand? I just have some extremely wet stuff right now so i have to kind of use the grinder. too sticky!
 
Last edited by a moderator:
farcus2323,
  • Like
Reactions: Baked55
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
farcus2323 said:
Sorry, I am new too this. Although, I have read the thread for a LONG time I have never posted until today. I have another question, Should I grind up my herb with grinder or try and break up with hands. Do you all find that chunk of herb work better? or when its more like wet sand? I just have some extremely wet stuff right now so i have to kind of use the grinder. too sticky!
Click to expand...

If your herb is wet, you will need to let it air out and dry a bit. Use a grinder, mine is the consistency of cornmeal. If that's too fine, because you get bits of herb in your mouthpiece, don't grind that fine.
 
Last edited:
F

farcus2323

Member
Pinnacle Pro said:
If your herb is wet, you will need to let it air out and dry a bit. Use a grinder, mine is the consistency of cornmeal. If that's to fine, because you get bits of herb in your mouthpiece, don't grind that fine.
Click to expand...

Lid off of oil canister if I am using that as a spacer?
 
farcus2323,
turk

turk

turk
farcus2323 said:
Sorry, I am new too this. Although, I have read the thread for a LONG time I have never posted until today. I have another question, Should I grind up my herb with grinder or try and break up with hands. Do you all find that chunk of herb work better? or when its more like wet sand? I just have some extremely wet stuff right now so i have to kind of use the grinder. too sticky!
Click to expand...
...I always use a grinder, with all my vapes....this facilitates even air-flow...
 
F

farcus2323

Member
I used the oil canister as a spacer and I always waited a little in between hits. It did work better and I did get pretty good vapor production. Again though, didn't last as long as I wished. Received around 6 hits.....Firing it up again to 390 with probably 0.4 last time tried 0.2
 
farcus2323,
  • Like
Reactions: nigel
S

sektr

Well-Known Member
HELP ME!!!
Ordering a pair of water tools, one straight 14mm one to use in place of the stock mouthpiece and with my bubbler when I feel like it, and one for my vast majority 18mm tube collection.

For the 18mm one I'm unsure whether I should get the straight tool or the U tool, is there a consensus as to which is better?
 
sektr,
E

EveryDayAmnesiac

Well-Known Member
I get good results without any extras. The oil jar works well but left some really stubborn stains in the chamber though so I quit using it, and the flowers just kept breaking so I said fuck that. Now, I just pack the shit out of my material with a wood dowel and do some light sippin' and micro tokin'. :tup:

Very pleased with the results this gives me.

sektr said:
For the 18mm one I'm unsure whether I should get the straight tool or the U tool, is there a consensus as to which is better?
Click to expand...

Straight for herbs, U for liquid.
 
Last edited:
nigel

nigel

And shepherds we shall be,for Accuracy & Discovery
sektr said:
For the 18mm one I'm unsure whether I should get the straight tool or the U tool, is there a consensus as to which is better?
Click to expand...

If you read back a page, you will see my rational for why the straight is the better tool UNLESS you are wanting to use viscous material.
 
nigel,
OF

OF

Well-Known Member
Norcalsun said:
I've noticed that after many comparisons, glass flowers give me more vapor than when using the glass oil can. Also I get better results with well dried out buds.
Click to expand...
mmenzie said:
i found this to be the same for me too
Click to expand...

Agreed. Dry herb is very important. As is giving time between hits for the heat to recover.

I think everyone who's tried the glass flowers found them 'the best' for the job? Any flower users go back to the little jars or beads?

farcus2323 said:
Could someone post a picture of what these glass flowers look like? Do they work better then canister?
Click to expand...
Reflections said:
@farcus2323 heres a link to the glass flowers

http://www.amazon.com/Glass-Tobacco-Screens--Daisy-Flower-Style--40pcs/dp/B009UZ5TAC/ref=sr_1_1?ie=UTF8&qid=1390939621&sr=8-1&keywords=glass flower screens
Click to expand...

Yup, those are the ones I used. They're actually pretty common it seems. Glass beads work OK too, be careful of lead crystal and surface colorings (especially the metallic looking ones). The disadvantage with them is like the oil jars, not a lot of surface area for the mass. The flowers excel here, the important part, the ability to rapidly transfer more heat into the load during the hit.

IMO given the purchase price of the Ascent, investing less that $10 more in flowers to experiment with should be on everyone's list sooner or later.

Regards to all.

OF
 
F

farcus2323

Member
Another question for everyone, and please elaborate and I would like to hear from a lot of different people, so its open for discussion. How are oil and wax in the Ascent? Do the oil jars work great, is the feeling better, does oil or wax last longer? Can you only use the Oil canister's for them? How do wax and oil compare to dry herb? Lastly, What is the best out of all three; flower, oil, wax?
 
farcus2323,
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
Does Davinci have a coupon code for FC members? Like 10 percent off or anything.
 
CarolKing,
N

Norcalsun

Well-Known Member
farcus2323 said:
Another question for everyone, and please elaborate and I would like to hear from a lot of different people, so its open for discussion. How are oil and wax in the Ascent? Do the oil jars work great, is the feeling better, does oil or wax last longer? Can you only use the Oil canister's for them? How do wax and oil compare to dry herb? Lastly, What is the best out of all three; flower, oil, wax?
Click to expand...

I've heard that oils and waxes don't do well but I haven't tried any yet. I've got some QWISO but I was waiting for some more feedback about using oils with the Ascent. I've got a glass globe atomizer on order that I want to try first. I don't want to take a chance of gunking up my Ascent, it can be hard to clean at times. Some people have suggested using cotton with oils and waxes. I too would like to hear more from people who have tried vaping oils and waxes.
 
Norcalsun,
You must log in or register to reply here.
Top Bottom