pakalolo

Toolbag v1.1 (candidate)
Staff member
Not sure why all of the harsh stuff on this one BDV. I've always enjoyed your posts and videos and continue to think of you as one of those incredible FC members that make this site exceptional. But, don't see why my post was uncalled for, and thought "none of your business" was a bit over the top.

We normally do not comment in situations like this but a lot of people share your view of BigDaddyVapor, so I will make an exception. It turns out that BDV is all about exceptions.

No one denies that BDV made a lot of good contributions to FC. Unfortunately, he has mood swings in which he lashes out and makes posts like his response to you. They have often been worse. As a result he periodically got in trouble and acquired warning points. Since you've read the rules, you know how that goes. Eventually you get enough to warrant a permanent ban. This happened with BDV more than once, but we tried to be understanding and he was allowed to return on probation.

BDV is probably really pissed with me right now. I hope he realizes eventually that he had more lives than half a dozen cats here, and certain moderators went to bat for him repeatedly. The problem is that at some point, we had to admit that his behaviour pattern wouldn't—probably couldn't—change. If we didn't ban him, we would have to continue to give him special breaks, and that would not be fair to the rest of you. We did not do this thing lightly. I wish the rest of you could appreciate how hard it is to take from someone something that he cherishes.

Further comments on this situation will be deleted. Talk about the E-Nano.
 

green2brown

Well-Known Member
I just found an amazing way to use hash/bubble/concentrates with the Nano. I turned the dial to 8 and used this little double cap ELB mod pictured below. It gave me the thickest, tastiest full melt hits I've ever taken. The Nano heater core fits perfectly snug inside the ELB cap.

photo-2_zps3f2e334b.jpg


photo_zps9b1f0933.jpg
 

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
I just found an amazing way to use hash/bubble/concentrates with the Nano. I turned the dial to 8 and used this little double cap ELB mod pictured below. It gave me the thickest, tastiest full melt hits I've ever taken. The Nano heater core fits perfectly snug inside the ELB cap.

photo-2_zps3f2e334b.jpg


photo_zps9b1f0933.jpg

Is that an 18/18 adapter , and what is an ELB, Where can I find these screens you speak of,
I must seem like an idiot, but could you please post a pic of that screen and that adapter ,
Where can i get these,?
is it just 1 screen in there?
Thanks in advance.
 

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
Well you just made my fucking day. Now I can use my Solo and other misc GonG with the E-Nano! I just need to find my my EQ ELBS.
What is an EQ ELB ?
Sorry if that is a dumb question.
is that the same as the previous poster used?
 
nickb,

green2brown

Well-Known Member
Is that an 18/18 adapter , and what is an ELB, Where can I find these screens you speak of,
I must seem like an idiot, but could you please post a pic of that screen and that adapter ,
Where can i get these,?
is it just 1 screen in there?
Thanks in advance.

Yup, it's just an 18/18 adapter. And an ELB is the stainless steel bowl for the VapeXhale Cloud. They're 4 for $20. And the 2 cap method I mention is described throughout the Cloud thread if you wanna search for it.
 
green2brown,
Yup, it's just an 18/18 adapter. And an ELB is the stainless steel bowl for the VapeXhale Cloud. They're 4 for $20. And the 2 cap method I mention is described throughout the Cloud thread if you wanna search for it.
It's also the same screen cap that is available with/for the Extreme Q, if I'm not mistaken.
 
kingofnull,

EveryDayAmnesiac

Well-Known Member
I'm sorry if I missed this, guys...

But are ALL orders going to start shipping this week? Or just a first wave of earlier orders?

Not impatient! Just wondering. :)
 
EveryDayAmnesiac,
  • Like
Reactions: steamfunk

gvape

Well-Known Member
I dont have my screens on me, but correct me if I am wrong, how can you fit the EQ screen inside each other. Do I need to bend them at all, they are the same size. Or is it two separate size cap screens.
 
gvape,
Mine have always fit inside each other :dontknow:. I posted in the EQ thread quite some time ago about a double screen 'mod'.

I dont have my screens on me, but correct me if I am wrong, how can you fit the EQ screen inside each other. Do I need to bend them at all, they are the same size. Or is it two separate size cap screens.
 
kingofnull,

Heat

Well-Known Member
I'm sorry if I missed this, guys...

But are ALL orders going to start shipping this week? Or just a first wave of earlier orders?

Not impatient! Just wondering. :)

From Andy's last post it sounded like he was going to start shipping Monday but I would not be shocked if he will be shipping more units out later in the week. He mentioned that the Nanos were just waiting for the heaters in an earlier post, so I assume final assembly is not terribly time consuming and he might have quite a few ready to ship today. Like you I'm hoping I'm one of the lucky ones having my unit ship today!

I'm just glad that the wait is no longer in the hands of the heater supplier. I have confidence that Andy will get us taken care of soon.
 

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
From Andy's last post it sounded like he was going to start shipping Monday but I would not be shocked if he will be shipping more units out later in the week. He mentioned that the Nanos were just waiting for the heaters in an earlier post, so I assume final assembly is not terribly time consuming and he might have quite a few ready to ship today. Like you I'm hoping I'm one of the lucky ones having my unit ship today!

I'm just glad that the wait is no longer in the hands of the heater supplier. I have confidence that Andy will get us taken care of soon.

I hope he stocked up on those Heaters, Because I have a feeling he is gonna sell out soon,
 

toros23

Well-Known Member
Hey Andy - Sent you an email Saturday about failed heater. I have blue light but no heat and would like to get it fixed. In other words, please set aside one of those new heaters for me..
 

toros23

Well-Known Member
Thanks, Andy. That is great news for everyone. Do you think it could have been a bad unit that ran too hot and that could be what turned the steel yellow? Really appreciate you taking the time to respond, I know you must be busy.
 
toros23,

Dr. Plutonious

Well-Known Member
Hey Andy, would you happen to have any pics of E-Nano's with an image laser engraved in it? I just was curious as it would help me get an idea at what is possible.
 
Dr. Plutonious,
Top Bottom