Discontinued Inhalater XP
- Thread starter JoeKickass
- Start date
2clicker
Observer
i think you can place your order, but it wont ship until at least the 8th. not sure if there will be any delays or not from that point.
i wonder where Taylor is....
*EDIT* well... i did it... order placed through PV. got some doob tubes and solo stem caps also. hopefully it ships on the 8th
AdmiralAlpacha
Well-Known Member
Can anyone who had the 004 and now the XP compare the draw resistance for me? And if possible take it one step further and compare it to anything in my signature.
My lungs have been even worse than their already shitty baseline, and unfortunately I have basically stopped using my inhalator due to the draw resistance.
From reading the changes I'd assume the resistance would be pretty much half, since the intakes were doubled. Could anyone comment on whether I would notice the difference? I love my 004 so much I have no reason to abandon it other than this.
Edit: Decided I should probably clarify to prevent misinforming or confusing onlookers. The draw resistance on the 004 is not bad at all, probably one of the best available, my lungs are the ones to blame. Any average person id assume this would be a complete non-issue for.
My lungs have been even worse than their already shitty baseline, and unfortunately I have basically stopped using my inhalator due to the draw resistance.
From reading the changes I'd assume the resistance would be pretty much half, since the intakes were doubled. Could anyone comment on whether I would notice the difference? I love my 004 so much I have no reason to abandon it other than this.
Edit: Decided I should probably clarify to prevent misinforming or confusing onlookers. The draw resistance on the 004 is not bad at all, probably one of the best available, my lungs are the ones to blame. Any average person id assume this would be a complete non-issue for.
Sonics420
Well-Known Member
i have both and the xp has atleast double, if not more, the air flow of my inh004.. one wrong hit on the xp can have me coughin lol. i havent tried anything else in your sig but just think about your 004 with atleast 2-3 times better air flow. it doesn't make any noise either when your sucking through it like the 004 does sometimes.
comparing heat up times, i turned the knobs to max and the inh004 took about 40 seconds longer to get to a still green light.
battery life is almost comparable from my usage but this one is hit or miss cause i dont time my sessions or weigh em either so it wont be as accurate.. but the XP doesnt seem like it blows out the 004 in battery life, only heat up time.
comparing heat up times, i turned the knobs to max and the inh004 took about 40 seconds longer to get to a still green light.
battery life is almost comparable from my usage but this one is hit or miss cause i dont time my sessions or weigh em either so it wont be as accurate.. but the XP doesnt seem like it blows out the 004 in battery life, only heat up time.
Hello everyone.
Sorry for being away so long. Work is intensive and days turn out short.
Here are occurances on the first XP units
Will not heat/stops flashing after 5 seconds - Broken solder at heater
Will not start. Potentiometer switch malfunction.
Small vapor quantity. Wrong calibration
Capsule wrinkle and flare. Capsule too long
Heating chamber malformation. Wrong length tolerancing and adjustment
Once the the Inhalater is not heating anymore, there is no battery drain. Once battery in completely charged, charging light does not come on. This is reason for apparent charger malfunction after heating malfunction.
All these details have been taken care of at this moment.
To all customers who have problems, we will do our outmost to return you a perfect unit as quickly as possible.
The electronics are the core of the XP. Body dimension reduction have been planned for months and are kicking in gradually.
Sorry for being away so long. Work is intensive and days turn out short.
Here are occurances on the first XP units
Will not heat/stops flashing after 5 seconds - Broken solder at heater
Will not start. Potentiometer switch malfunction.
Small vapor quantity. Wrong calibration
Capsule wrinkle and flare. Capsule too long
Heating chamber malformation. Wrong length tolerancing and adjustment
Once the the Inhalater is not heating anymore, there is no battery drain. Once battery in completely charged, charging light does not come on. This is reason for apparent charger malfunction after heating malfunction.
All these details have been taken care of at this moment.
To all customers who have problems, we will do our outmost to return you a perfect unit as quickly as possible.
The electronics are the core of the XP. Body dimension reduction have been planned for months and are kicking in gradually.
Rrose Selavy
log enthusiast
so are the new units the smaller ones with the small sticker?
AdmiralAlpacha
Well-Known Member
Exactly what I was looking for, thanks!
Sonics420
Well-Known Member
I feel it, after having both units i realize they are almost the same. They both have that bug where you get no light or a very dim light after you try to go for a back to back session. So you have to turn the dial on and off sometimes. I wonder if this is something they would warranty? Its not a big deal but if they have the same bug and are almost identical....then it does feel like I bought a rebranded 004..
Still my best vapes by far though
JoeKickass
Well-Known Member
But does it heat up faster / feel more powerful?
Dreamerr
Always in a state of confusion and silliness♀
WOW...this doesn't seem like an improvement. This is sad. I hope they get it worked out soon. They say they did but as always we won't know till it is in peoples hands for a few weeks or so. This is the same bugs as the first unit and it took them all this time to have the same bugs
mmenzie
My friends call me "Menz"
sounds like if you think you got a bad one or one that is not right you can send it back. doesn't hurt to call or write to them and ask.
HazyDaze
Active Member
Well, I won't know for certain until I have my unit in my hot little hands (Hmm.... did that come out right?). The only thing that I find puzzling relates to as why there are so many iterations of the XP floating about. Over the last few days we've seen the INH004 sized XP appear with two and then four air-intakes with rounded and flat end caps. Then, we've seen the slightly smaller version with two air holes.
In the end though, I'm sure it won't be a big deal because even if the improvements over the original 004 prove to be marginal, the XP will be an amazing vaporizer.
BaMbAaAChA
HAKUNA MATATA!!
My XP is charging right now but it doesnt light up for use... there is anyhope it ll light up after full charge... or...?!?!
tikimaize
Big Rigger Approved!
That's what mine does, chances are its dead. Check and see if it is heating up. If its dead send an email (and include your shipping address) to Pharmcor and they will send you a replacement.
BaMbAaAChA
HAKUNA MATATA!!
last use of it, it wasnt heating the core then the light went off (thought battery dead) and now that I am charging it nothing change 
Yeah, I'll be ordering mine tomorrow most likely, hopefully I get it by the 8thi think you can place your order, but it wont ship until at least the 8th. not sure if there will be any delays or not from that point.
i wonder where Taylor is....
*EDIT* well... i did it... order placed through PV. got some doob tubes and solo stem caps also. hopefully it ships on the 8th
. I'll let you know how I like it.
Rrose Selavy
log enthusiast
nice im ordering mine on the 7th hopefully i will have it in less than 2 weeks. they are not shipping out until the 8th so you probably wont have it by the 8thYeah, I'll be ordering mine tomorrow most likely, hopefully I get it by the 8th
TheCookieKing
Member
I ordered mine from PV a month or so back and it still hasn't shipped yet... So if y'all are just now ordering I wouldn't expect it to be shipped on the 8th. They still have to take care of everyone who purchased it a while ago.
Rrose Selavy
log enthusiast
im not surprised i figured some people were waiting on their orders. it all depends on the size of the shipment PV is getting. right now the site says a 10 day delay on the XP. hope its accurate.
Yup definitely says that, damnit I did not see that. Now I am bummed. I was hoping to have it before the 14th at least.
The XP unit is at it's core constituted by the new heating chamber and sensitive electronics. The evolution of the body, does not impact on the vapour quality and production.
As testing was done with new electronics, it was discovered that air flow could be opened, we thought that maximum air draw was reached with 4 holes in the body and this modification incorporated into the components on hand.
As we planned for a new production of body components and included modifications planned months ago ; a shorter body and modified inner chamber air passageway: we discovered that air draw limiting factor was internal and that 2 holes on the exterior body was sufficient.
Basically, 2 hole or 4 hole configuration, length of unit and cap shape should not be used as factor to determine if unit is an XP or a 004. The difference lay in the heating chamber; a coil on the 004 and flat strips on the XP and the presence of the auto mode.
Adding to confusion is that when capsule filter is gummed up; draw will revert closer to 004 standard.
As testing was done with new electronics, it was discovered that air flow could be opened, we thought that maximum air draw was reached with 4 holes in the body and this modification incorporated into the components on hand.
As we planned for a new production of body components and included modifications planned months ago ; a shorter body and modified inner chamber air passageway: we discovered that air draw limiting factor was internal and that 2 holes on the exterior body was sufficient.
Basically, 2 hole or 4 hole configuration, length of unit and cap shape should not be used as factor to determine if unit is an XP or a 004. The difference lay in the heating chamber; a coil on the 004 and flat strips on the XP and the presence of the auto mode.
Adding to confusion is that when capsule filter is gummed up; draw will revert closer to 004 standard.
TheCookieKing
Member
I haven't received mine yet so this may perhaps be a silly question, but is there a way to clean the capsule filter?