Dynavap VapCap

stark1

stark1

Lonesome Planet
@-dab8- your question about micro-dosing capsules, the Capsules for the Fury is a smidgin too
Big, won’t fit.

The S&B are of course way huge for the VC tip.

Perhaps carry a couple of pre-loaded tips? A duo of VapCaps.

There is also a quick loader; insert, twist to load. From Israel, I believe.


 
Last edited:
elykpeace

elykpeace

exVASted
stark1 said:
@-dab8- your question about micro-dosing capsules, the Capsules for the Fury is a smidgin too
Big, won’t fit.

The S&B are of course way huge for the VC tip.

Perhaps carry a couple of pre-loaded tips? A duo of VapCaps.

There is also a quick loader; insert, twist to load. From Israel, I believe.


Click to expand...
Love the grasshopper feeder and case he makes outta Israel .. good quality . Might need to grab one of these too.
 
W

WreckingBall

Active Member
TwisteD said:
Hi guys!

I haven't posted in a while, I asked for suggestions for a vape and gladly everyone suggested the OmniVap (well, almost everyone) and I'm so glad I got it! I've been using it and I love it so much, I just have a question, lately I've been feeling something weird in my omnivap, not sure what. Maybe I feel that I can remove the mouthpiece very easily just pulling it lightly, I'm not sure if it's supposed to be more "firm", have I lost the O rings? Are the O rings the grey ones? I think I've lost something from my omnivap, something is going on, I feel it different, when I tried the bong attachment, every time I tried to remove the thing that you attach to the mouthpiece so you can use it it a bong, the mouthpiece came with it and I had to attach it again, I remember that it was more firmly before, any thoughts? Thanks!!!

xe1NhnJ.jpg
Click to expand...
Make sure that the mouthpiece is connected to the threads of the condenser of the Omni. I had the same problem once and realized that I installed the condenser upside down. :shrug:
 
stardustsailor

stardustsailor

Well-Known Member
Accessory Maker
djurodjakovic said:
guys did anyone used these o-rings for vapcap because as I see the specs say max temp is 260C.
I don't know what temp can we produce using the torch but I presume it's in that range?

http://www.oringsandmore.com/silicone-o-rings-6-x-1mm-price-for-10-pcs/
Click to expand...

Personally I've been using exclusively those VMQ o-rings for quite a while and
lately i use them on all of my custom Ti stems .

They are softer than the standard Viton ( FKM ) o-rings ,thus prone to be damaged easier than the latter.
But they do have quite a few of other advantages that counterweight this particular " weakness " .
 
Bebop

Bebop

Way of the Mild
Hey I noticed something interesting , I’ve set my omni aside for a while and just went back to using it today. I noticed that if I pack the bowl down a bit, I get full extraction with one toke right on the click .(using lighter) I use the packing tool from my Flowermate .
 
B

Battleship Cuthbert

Member
Just spent my first night with a Dynavap product and it was great. Bought a M "18" starter pack. Still dialing in the correct technique but I can see why everyone loves there Dynavap's so much. I just went for the M to try it out before dropping cash on some pimped out monster that I didn't even end up liking using but now I can see that wont be a problem. Anything out for the M you guys fell would make the experience even more enjoyable?

Good to finally be part of the fam here
 
Rasputin

Rasputin

Bobcat @ VLife. Le__Bobcat @ IG
djurodjakovic said:
guys did anyone used these o-rings for vapcap because as I see the specs say max temp is 260C.
I don't know what temp can we produce using the torch but I presume it's in that range?

http://www.oringsandmore.com/silicone-o-rings-6-x-1mm-price-for-10-pcs/
Click to expand...

Hi, I have not used those O rings, but George has said the cap clicks at roughly 204°C/400°F. The rings aren't in the cap so you should be fine based on those numbers.

Weird thing: your link states "Temperature range: -103°F to 446°F (-73° 260°C)." 260°C is actually 500°F so if they got that incorrect who knows what else may be wrong. Also, I only looked at the temp info, not size nor anything else. ✌
 
Gigsabits53

Gigsabits53

Well-Known Member
Battleship Cuthbert said:
Just spent my first night with a Dynavap product and it was great. Bought a M "18" starter pack. Still dialing in the correct technique but I can see why everyone loves there Dynavap's so much. I just went for the M to try it out before dropping cash on some pimped out monster that I didn't even end up liking using but now I can see that wont be a problem. Anything out for the M you guys fell would make the experience even more enjoyable?

Good to finally be part of the fam here
Click to expand...
I think you will find different answers to your question. Personally, I think the M is just as good as any of the others. I have one, also have an Omni and another, the XL Vong. There are little things that make an Omni better, all Ti, and the adjustable air flow, which is a very nice feature, but I dont use it at all. I leave my Omni closed all the way 100% of the time, but thats just me. I know that others really appreciate the set it and forget it capability of the Omni. As far as flavor, intensity, etc, I cant tell the difference between my M and my Omni. Welcome aboard!!
 
Ramahs

Ramahs

Fucking Combustion (mostly) Since February 2017
Hogni said:
So far I've understood it myself. But I can't believe it shall be used with the free-standing, unprotected mesh!? Because of the vertical standing mesh I can't see a way to protect the mesh area with a "hood"
Click to expand...

From the picture, I just assumed that there would be a glass or metal or wood cover that goes over it with holes in the side. The grove(s) on the sides below the heater section is where the large orings go that allow a press-on cover. I just thought that was a given, by what the picture showed.
 
Ramahs,
  • Like
Reactions: Ricardo
Bebop

Bebop

Way of the Mild
Rasputin said:
Hi, I have not used those O rings, but George has said the cap clicks at roughly 204°C/400°F. The rings aren't in the cap so you should be fine based on those numbers.

Weird thing: your link states "Temperature range: -103°F to 446°F (-73° 260°C)." 260°C is actually 500°F so if they got that incorrect who knows what else may be wrong. Also, I only looked at the temp info, not size nor anything else. ✌
Click to expand...

Hmm .. I have question unrelated to the topic , it’s interesting to know the cap clicks at roughly 400f , the avb color from vapcap is same dark brown color as my flowermate which max temp is like 446f. Is it because the vapcap is a mix between conduction and convection ?
 
L

London Vaper

Well-Known Member
If i put the same amount as vapcap chamber in a mighty with a liquid pad on to do you think i will get the same effect/high?

I had a mighty 3 years ago i always felt i wasn't high enough as had use it on low temps so i dont cough a lung out.

I really want something i can use outdoors and in cold weather but im not a session vaper more on demand few big hits to get nice and carry on, i have no desire to get the MV1 Ghost.

I enjoyed my Arizer Air but id have do too many bowls to feel it so the whole experience took up way too much time and outdoors the glass stem gets cold so became less effective.

Vapcap is only vape i used so far that gives me a satisfying high. I do 3 vapcap loads and then melt into my sofa.

I vape in my bathroom once wife n kid gone to sleep so cant be a desktop otherwise i would have a vapexhale.
 
noel

noel

member
London Vaper said:
I am fighting VAS so hard atm. Omni XL is all ive used for year now and it gets me the highest ive ever been.

Ive had a mighty, solo 2, firefly, splinter, pax 3 and various mid tier vapes and none satisfied me like the Vapcap so. i dont even know why i have vas because i know what i have now will get me wrecked, is kind to my stash, easy to clean and super stealthy so if it ticks all my boxes why am i fiending to buy something new.

Fury 2 interests me but small battery puts me off, mighty is overhyped it makes me cough and leaves my avb too green so only option left is the vapexhale but i dont like long airpaths they feel like too much hard work and cant be arsed with breathing techniques i just wana hit the thing and get ripped the whistle also puts me off.

Tried sticky Brick and theres too much technuque involved, i like to just have 1 vape that does the job everytime i dont have time to experiment and play around. Vapcap 3 cycles per bowl everytime, dark even fully extracted avb everytime its so consistent & if i dont feel it i know its the bud not the vapcap.

I got a pipes induction heater and the uneven avb it gives me dosent appeal to me the bottom of the load is always green.

My omni XL & Aoimi lighter are all i need so why do i still have VAS!?! lol
Click to expand...

only one left woodscent hmmm
 
Last edited by a moderator:
L

London Vaper

Well-Known Member

VAS got me!! lol

SB Jr arrives next week but its still not what id use outside.

The cold weathers kicked last few days so i feel the need to get something else more now.

noel said:
only one left woodscent hmmm
Click to expand...

Im in uk i cant get them here otherwise id have one by now.

Sorry i double commented i dont know how to incorperate the reply to my old comment, sorry.
 
Last edited by a moderator:
London Vaper,
L

London Vaper

Well-Known Member
elykpeace said:
@Ed's TnT has the CE cert now
Click to expand...

OMG thanks for letting me know bro!!

I was literally going to drive to shop to buy a Mighty in 30mins. Made a coffee and sat back down now & have something else to read and watch videos on for the next week.

Never really looked into them because i cant get one but what little i seen i do think ill like it, the waiting time will kill me and Black Fridays round the corner.

Aghh so much to think about. lol
 
noel

noel

member
Its just amazing, that man. Ed? Genius!!!
kinda like that, Doing something for the betterment
of the community:clap:
London Vaper said:
OMG thanks for letting me know bro!!

I was literally going to drive to shop to buy a Mighty in 30mins. Made a coffee and sat back down now & have something else to read and watch videos on for the next week.

Never really looked into them because i cant get one but what little i seen i do think ill like it, the waiting time will kill me and Black Fridays round the corner.

Aghh so much to think about. lol
Click to expand...
 
noel,
  • Like
Reactions: Ed's TnT
You must log in or register to reply here.
Top Bottom