Vitolo
Vaporist
I like to use the 14MM Male body too, once in a while for that tiny bit of restriction:
That drop down is even neater and sweeter!
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
That drop down is even neater and sweeter!
Yes, but if Im correct, that was BEFORE the problem was fixed, or as was essentially the problem- acknowledged!
So the video is in fact a demo of how you can still milk that bubbler EVEN WITHOUT a perfect seal.
Hehe, you mean like a blunt knife hurts more? Be careful man.
Last edited:
LabPong
Well-Known Member
You are going to have to make a decision of what is most important too you to have.... the best experience of dabbin....or the best experience of flower. You give up a little each way too one going from WA to SH.
Flowerhead has more volume of air jetted through the head than the Wrap Around so it is very free flowing. WA has less holes in the air path part of the head and has more draw resistance. The WA has different dishes you can choose from for dabbing surface. Showerhead is a less experience at dabbing but highly excels to be top contender for a desktop vape.
That is basically it......choose your most important use type.
Vaporware
Well-Known Member
For flower most who have both prefer the ShowerHead, but most are also happy with the Wrap-Around for flower and prefer it for dabbing. A few even prefer the WA for everything.
Since you’re half concentrates, unless you want to shift more toward flower again and you don’t mind dabbing I’m Ti, you should instead be looking at the WA vs the D-Nail compatible WA.
A lot of people are happy with the standard WA which uses imported inserts sourced from TAG, but everyone I’ve heard from who’s tried both says the D-Nail dishes are nicer (and many times the price).
If you want the D-Nail compatible Wrap-Around, look in the FlowerPot Parts section of NewVape’s site.
buckhakeesah
Well-Known Member
I've never tried the SH, but WA can get there with flower. The fun thing with the FP, you can dial in where you want to be, it's very versatile. Carb capping helps if you want that immediate vapor with the WA, so be sure you grab the right carb cap if you go that route.
I have to admit though, the FP is one of the smelliest desktops I have, so it doesn't come out as much due to my current living situation. It just emits the aromas way more than my other ones. If that doesn't bother you, go for it, you'll be happy you did.
I have to admit though, the FP is one of the smelliest desktops I have, so it doesn't come out as much due to my current living situation. It just emits the aromas way more than my other ones. If that doesn't bother you, go for it, you'll be happy you did.
I'm asking for some Community Support, can we all email them and tell them their international shipping prices are a little outrageous.
There's already a few people here who didn't order because of it, and I'm trying to order just a stand and a handle and it's $65 to Canada that's nuts.
Everyone get those fingers going and send them a nice friendly email saying they should lower their international shipping costs please let's see if that works!
support@newvape.com
There's already a few people here who didn't order because of it, and I'm trying to order just a stand and a handle and it's $65 to Canada that's nuts.
Everyone get those fingers going and send them a nice friendly email saying they should lower their international shipping costs please let's see if that works!
support@newvape.com
jfrsn
Well-Known Member
For what it's worth I ended up getting an adjustment for shipping to come down to $39. If shipping to Australia is $20 Canada should not be $39 but I guess I wanted it. I ended up getting a full quartz kit and a showerhead cap to screw on need be. With shipping if I get hit with duty that's almost 600CAD.
Looking forward to the setup coming. Thanks for the help everyone.
They should be more consistent, I sent an email asking for reduced shipping ( all I got was a WA, shovelhead and lollicap and it was $65 to canada) I asked for help with the fee and they were kinda snarky in their reply and said thats the way it is.
Justpassedu
Well-Known Member
I think bombarding a company with Emails is the wrong way to go about it man. They are not a huge operation and don't have a large staff. It would most likely hold orders up and add more time to there work day if we all emailed them bc you and a few international customers are upset about the shipping rate. You got your point across via email. They have made it a point that they tried in the past and even reached out to distributors across seas to stock product and made it happen with vapefiend. Maybe you should stock some product in Canada and reach out to them to be a distributor so you can help everyone in Canada and even make a few $ at the same time. Remember they are a mom and pop shop. Please take no offense to this but a personable email is usually the best way to get the issue resolved and if it does not work I'd say just move on.
I hear you I just asked them a few times nicely why they're shipping is so expensive and if they could reduce it , they were little snarky with me and I found out in this thread they've been giving reductions to other people.
They need to be a little more consistent.
I'm actually doing it for their good there's a bunch of people in here who didn't buy because of it and I'm reducing my buying because of it. And so I (we) can order stuff in the future without these high shipping costs.
Edit:
And I don't think it would have bombarded them too much they might get 5 or 10 emails about it if I'm lucky
They need to be a little more consistent.
I'm actually doing it for their good there's a bunch of people in here who didn't buy because of it and I'm reducing my buying because of it. And so I (we) can order stuff in the future without these high shipping costs.
Edit:
And I don't think it would have bombarded them too much they might get 5 or 10 emails about it if I'm lucky
Last edited:
i understand about the shipping i really do, i was in shock at the high price to ship to some places also.. but as far as i am aware, newvape has stated this is what the carrier is charging them. i went to USPS site and did an "shipping estimate". i encourage anyone else questioning shipping to do the same, if you can get it cheaper, send newvape an email letting them know.
(screencap was an estimate from FL to canada)
now ask yourself this question, would you, as a business person, take a loss on your sale just to make said sale?
i can honestly say, i wouldnt. whats the point of being in business if im not making any money at it.
sure, he's not losing all his profit by eating shpping im sure, but the point still stands, people dont go into business to take a loss, they go in to make a profit.
(screencap was an estimate from FL to canada)
now ask yourself this question, would you, as a business person, take a loss on your sale just to make said sale?
i can honestly say, i wouldnt. whats the point of being in business if im not making any money at it.
sure, he's not losing all his profit by eating shpping im sure, but the point still stands, people dont go into business to take a loss, they go in to make a profit.
Justpassedu
Well-Known Member
Bottom line the thread is about the Flower Pot and not Shipping so lets try and keep it on topic or you can ask the mods to make a separate thread for your shipping issues. Really not trying to be a Di** but I like to come here and read about the the Fp and stuff like this really derails the thread.I hear you I just asked them a few times nicely why they're shipping is so expensive and if they could reduce it , they were little snarky with me and I found out in this thread they've been giving reductions to other people.
They need to be a little more consistent.
I'm actually doing it for their good there's a bunch of people in here who didn't buy because of it and I'm reducing my buying because of it. And so I (we) can order stuff in the future without these high shipping costs.
Edit:
And I don't think it would have bombarded them too much they might get 5 or 10 emails about it if I'm lucky
Im done, this was from me trying to get a fp in peoples hands who want them like I do but were not good with the shipping costs.
No need for new thread.
Newvape should ask for a volume discount. My last point here. I will see but since they use usps I may not get a duty charge( which may be $50 or more) which I get when places ship with UPS for example.
Modnote: Edited to add the following final comment:
To finish this, newvape just mailed me about their concern for international shipping costs and said they are working in it, they thanked me for pushing the subject here and trying to get FP into peoples hand
No need for new thread.
i understand about the shipping i really do, i was in shock at the high price to ship to some places also.. but as far as i am aware, newvape has stated this is what the carrier is charging them. i went to USPS site and did an "shipping estimate". i encourage anyone else questioning shipping to do the same, if you can get it cheaper, send newvape an email letting them know.
(screencap was an estimate from FL to canada)
now ask yourself this question, would you, as a business person, take a loss on your sale just to make said sale?
i can honestly say, i wouldnt. whats the point of being in business if im not making any money at it.
sure, he's not losing all his profit by eating shpping im sure, but the point still stands, people dont go into business to take a loss, they go in to make a profit.
Newvape should ask for a volume discount. My last point here. I will see but since they use usps I may not get a duty charge( which may be $50 or more) which I get when places ship with UPS for example.
Modnote: Edited to add the following final comment:
To finish this, newvape just mailed me about their concern for international shipping costs and said they are working in it, they thanked me for pushing the subject here and trying to get FP into peoples hand
Last edited by a moderator:
gunmetalshark
Glass Addict
YaMon
Vaping since 2010
Sign me up! Looks a lot nicer than the ash catcher/pipe combo I have and I’m sure the glass bowl puts it over the top! Perfect unit to enhance your FP experience!
@gunmetalshark bitchin cloud maker bro!
LabPong
Well-Known Member
disGRUNTled
Well-Known Member
/https://i.s3.glbimg.com/v1/AUTH_e84042ef78cb4708aeebdf1c68c6cbd6/internal_photos/bs/2017/U/D/4zeFuPTXelhAjPRJSp6Q/gif-nazare-confusa.gif)
thanks guys!