After months of having my vapcap I'm finally coming around the to mindset of "heating with butane is safer than heating elements with batteries"
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
After months of having my vapcap I'm finally coming around the to mindset of "heating with butane is safer than heating elements with batteries"
natural farmer
Well-Known Member
Andreaerdna
If God is the answer, then the question is wrong
I got the same message at midnight pst. They are working hard over there and I appreciate it. 
I love my flowermate but am totally thrilled to be able to be able to take a few puffs vs 10-20 minute sessions.
I bought one for me and I haven't decided who I will give the second to.
I love my flowermate but am totally thrilled to be able to be able to take a few puffs vs 10-20 minute sessions.
I bought one for me and I haven't decided who I will give the second to.
A little vapcap heater I've been working on lately -
The auto-magic super rZToaster, or something like that..
Still a WIP, but getting there
The auto-magic super rZToaster, or something like that..
Still a WIP, but getting there
Cuthbert Sinclair
Well-Known Member
I placed my order for the M on 01/04 early in the morning. got a conformation for my order. But nothing after that. Does anyone know why its taking soo long to ship it ?
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Probably the weekend, and sometimes USPS likes not updating shit. I've had packages track to the other side of the country only to be delivered hours later... had a package (not from DynaVap) stuck at the shipping facility in Compton and then everything updated when it was delivered. Patience, padawan
MrMonss
Well-Known Member
Thanks, appreciate your help.
I went to the site to complete my OG Vapacap a bit, then I saw the deals, and finally soon I will have the stainless steel (M), wood and glass versions..
I am in a hurry to receive my package although I am not a great user of portable vaporizers..
I think it is the arrival of spring or still a case of VAS..
Can someone provide the outside diameter of the M tip ?
Since I haven't got mine yet ,in order to try something .
Maybe the Arizer Air can be "mated" just fine with the DynaVap M .
Who needs an induction heater if so ?
Since I haven't got mine yet ,in order to try something .
Maybe the Arizer Air can be "mated" just fine with the DynaVap M .
Who needs an induction heater if so ?
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Tried it, it works but low vapor and takes a bit to get to temp. I just set it inside, maybe holding it against the side of the oven will help it heat faster? I'll set up right now. Just need to pack a fresh stem and get my Solo heating (it's on the power adapter). The VapeXhale Evo works better, if you search it in the thread with the search function I believe Stu posted a video of it. Be right back, science must be done!Can someone provide the outside diameter of the M tip ?
Since I haven't got mine yet ,in order to try something .
Maybe the Arizer Air can be "mated" just fine with the DynaVap M .
Who needs an induction heater if so ?
Edit: light vapor, struggled to get a hit of any real significance. Let it heat up to 7, +30 seconds, VapCap went in, I never heard a click lmao. Still got light vapor. Obvious signs of vaporization occurring (please excuse the lighting quality):
Last edited:
I will have to try my Herbalizer at 445 as it should be plenty hot.Tried it, it works but low vapor and takes a bit to get to temp. I just set it inside, maybe holding it against the side of the oven will help it heat faster? I'll set up right now. Just need to pack a fresh stem and get my Solo heating (it's on the power adapter). The VapeXhale Evo works better, if you search it in the thread with the search function I believe Stu posted a video of it. Be right back, science must be done!
Edit: light vapor, struggled to get a hit of any real significance. Let it heat up to 7, +30 seconds, VapCap went in, I never heard a click lmao. Still got light vapor. Obvious signs of vaporization occurring (please excuse the lighting quality):
annnnnd NOTHING! I don't really want to stick the tip down in the herb chamber because it would start heating up my wood too much.
Last edited:
TheVaporist
Man is a universe within himself
Vapor_Eyes
taste buds
This look like a perfect "rendezvous" for my weekly @VapCap pic.
Looking the wood's face on this angle reminds me "The scream" from Edward Munch
(35mm - F5.6 - 1/250s and a bunch of Vernier thrusters)
---
This picture is too good.
Two beautiful VapCaps, one of which is two-toned burl, with that great custom Apollo-Soyuz cap. I love it!
And I love "the scream" as you knew I would!
CarolKing
Singer of songs and a vapor connoisseur
I would like a VapCap that would work well with the Woodscents @Ed's TnT . I've asked elsewhere and haven't gotten any responses. I don't know a lot about the VapCap. I've read some of this thread. I don't want to spend too much over $100. I did see a beautiful VC with the Woodscents but it was almost $200. Maybe they all work with the Woodscents? I see one that would match my Thuya Burl.
Edit
@FreddieFresh Thank You.
Edit
@FreddieFresh Thank You.
Last edited:
FreddieFresh
Well-Known Member
All the Ti tip models work with the WS. This is the same tip that is included with the WS. And now that its out, the cheaper M model with SS tip should work as well.
Edit: Their sale just ended but they'll be having another one for 4/20. Here's a list of their VonG bodys and their respective prices:
https://www.dynavap.com/dynashop/vaporizers/nonavong/all
Last edited:
GeeWhiz
Well-Known Member
Just and FYI. I started having a super hard time putting the condenser back inside my Omni Blackwood. It would just not go in. I thought it must be too sticky so I cleaned it with ISO. Still would not go in. I had washed it with ISO before leaving the cruise ship last week to be sure it was pretty much odor free but I washed with the rubber seals on. I then took really care to observe and it was clear. The O ring in the middle of the condenser on the omni had been weakened by the ISO and it was bending out of its groove each time I tried to put it on. Replaced the o ring an Whala.. it works fine.
I bought the M this weekend for the 36.00. Honestly I would buy 5 if I had 200.00. i really would. My main fear is that this thing is so little.. its tiny and it would be easy to lose a 160.00 piece. I am excited about trying the M and also about the way now I can share this with others if they do not like it or use it. I hope the performance is good.
Honestly though they all work great but usually each different type needs slight modifications to get the best hits.
Chao.
Greg
I bought the M this weekend for the 36.00. Honestly I would buy 5 if I had 200.00. i really would. My main fear is that this thing is so little.. its tiny and it would be easy to lose a 160.00 piece. I am excited about trying the M and also about the way now I can share this with others if they do not like it or use it. I hope the performance is good.
Honestly though they all work great but usually each different type needs slight modifications to get the best hits.
Chao.
Greg
PeteSeattle
Well-Known Member
@GeeWhiz the same thing happened to me with the Omni. 2 o-rings have bit the dust and they were cleaned with only hot water, soap, and a sonic bath. Perhaps the Omni should include extra o-rings. Or it would be nice if every VC purchased came with a spare set.
Tracking for my M is notifying me it's arriving today! I hope to hit the rec shop today ...
Tracking for my M is notifying me it's arriving today! I hope to hit the rec shop today ...
Last edited:
CarolKing
Singer of songs and a vapor connoisseur
I ended up ordering the M. A nice price even though I didn't get the sale. Hopefully it will work with my WS.
I've also been trying to convince my brother to fuckcombustion. I haven't had good luck so far. I will let him try mine when I get it.
I've also been trying to convince my brother to fuckcombustion. I haven't had good luck so far. I will let him try mine when I get it.
hinglemccringleberry
Well-Known Member
FYi Puretane supposedly has lower residuals than all of these; its a true créme brulé butane. According to 1 website it checks out at 0.06 and another website said its 0.003. Its advertised at 0.0002, but even if theyre BS'ing and its really 0.1, well, thats still the cleanest lol.Low quality butane will clog the jets in your torch over time. Here's a chart that may be helpful:
Source (extremely in-depth analysis):
https://skunkpharmresearch.com/bho-mystery-oil/
I would avoid Ronson at all costs, Colibri is also less than ideal. Anything else on the chart should work well. I use Lucienne because I can buy it for a great price at my local head shop. .
Last edited:
cybrguy
Putin is a War Criminal
Well, at least you have established whether you really and truly have VAS...
Creeper
deep in the matrix...
Jesus so many posts in this thread, I wonder if these are popular??? 
Anyways, just to add to the knowledge base I 100% agree on ditching the grinder and throwing some herb right in the unit. The flavour cannot be beat and I definitely feel the medication more, grinders do alter the flavour. You don't get as much thick vapor mid-session but again the flavour is outstanding throughout the whole session.
A little personal note, I would run it through a small bubbler if you are going to crush the herb directly in the tip after 1-2 heating cycles. It created a lot more smaller particles that ended up in the water as opposed to my fine grinds that I placed in the tip.
Keep calm and VC on!
Anyways, just to add to the knowledge base I 100% agree on ditching the grinder and throwing some herb right in the unit. The flavour cannot be beat and I definitely feel the medication more, grinders do alter the flavour. You don't get as much thick vapor mid-session but again the flavour is outstanding throughout the whole session.
A little personal note, I would run it through a small bubbler if you are going to crush the herb directly in the tip after 1-2 heating cycles. It created a lot more smaller particles that ended up in the water as opposed to my fine grinds that I placed in the tip.
Keep calm and VC on!
FabulatorPoeta
Where has the time gone?
Pretty sure you will enjoy it. I find it exceptionnal for micro-dosing.
I highly recommend a @Squiby hemp filter if you're going to do whole nugs for this reason. It keeps the condenser and stem really clean so the only thing that makes it through is a bit of reclaim.A little personal note, I would run it through a small bubbler if you are going to crush the herb directly in the tip after 1-2 heating cycles. It created a lot more smaller particles that ended up in the water as opposed to my fine grinds that I placed in the tip.
Keep calm and VC on!
lookhigh
FC member
Im very sure you will love it. A nice addition that will fit in perfectly with our beloved Solo.
Beware you will want to buy more VapCaps soon.