snamuh

ghost
Does Anyone have a gun to measure the temp I should be getting on 10? I can borrow one soon
I think it is an inrared heat detector. I have a warm FF, do people know of cool nanos?
Or perhaps it's the dial? I guess I will keep it, with the hassle of exchange and all, but forget
about concentrates.
how full do you pack it? the epik pik isnt always the right space. I usually have it closer because I don't use much material. its really all preference, try a bung of things... My sized load with the ePIK measurement needs a higher temp.

edit: as for temp, mine gets almost uncomfortable to touch at 9. but may also have to do with my dry hands.
 
Last edited:
snamuh,

btka

Well-Known Member
@hafalump i only used my enano two times nonvolentery at 10 and i combusted... also my throat was burnt i think (my throat hurted one day long each time...it was not a nice experience...) but ithink i heared here in the forum about people thinking of having an "cold" enao... dut don t no if it was true claim or if it was user default...
 
btka,

ChippyMalone

Be here now.
Accessory Maker
This is my Black Friday sale package that never had any tracking updates until I found it on the doorstep in this alarming condition.

I'm not sure i'm emotionally prepared to find out what is missing/damaged from my traumatized and molested box, but the Sugar Plum here might help give me the courage in a little bit.......

Edit: missing two regular stems, some screens, and an all glass GonG. The original tape was peeled off some time while was at the post office. Clearly just a victim of USPS and I'm not remotely upset with Andy here. I'll have to figure out how to file a claim with USPS since they stamped the evidence of their mishandling right on the box.

n5epy7A.jpg
 
Last edited:

flotntoke

thoroughly vaped
This is my Black Friday sale package that never had any tracking updates until I found it on the doorstep in this alarming condition.

I'm not sure i'm emotionally prepared to find out what is missing/damaged from my traumatized and molested box, but the Sugar Plum here might help give me the courage in a little bit.......

Edit: missing two regular stems, some screens, and an all glass GonG. The original tape was peeled off some time while was at the post office. Clearly just a victim of USPS and I'm not remotely upset with Andy here. I'll have to figure out how to file a claim with USPS since they stamped the evidence of their mishandling right on the box.

n5epy7A.jpg

DAMN! That sucks @ChippyMalone ! Hope it all gets straightened out. DAMNED USPS!!

Get nice pulls at low temps, but done at at 10, blonde and smoe green specks.

As someone else asked above, is your dial correct? Does it shutoff around 0, and max out at 10? Sometimes they are not lined up correctly from the factory. But, easy to remove and replace in right spot.

Also, are you plugged directly into the wall, or through extension cord or surge suppressor?
 

mixchu69

Well-Known Member
My mouth and throat will start to dry out and get irritated. Sometimes my teeth will start bothering me.

What I meant by multiple sessions was concurrent sessions. As long as I take a little break between stems it isn't so bad.

But I've always been a fan of water pipes since I was a youth, so they are as fun to use as they are beneficial.

If you can handle the wait, I highly recommend picking up a bubbler from DHGate and avoid your LHS, unless you have the $$ to throw around. My LHS is a joke, I have more scientific glass than they do.
I like the vapor brothers bubbler. Minimal diffusion and great size. A little pricier $80 after coupon
 
mixchu69,

ChippyMalone

Be here now.
Accessory Maker
@btka, I have two of these. One of them is a little hotter than the other by about 1/2 a notch. I just have to remember which is which. As long as your numbers are remotely close to what you read here, and if it vapes well, you are good.

In other E-Nano news, I had a highdea the other day and modified one of my E-Nano's to improve stability by adding a functional weighted base to minimize the need for cord management or careful placement when setting the device down.

Edit: no E-Nanos were harmed in the making of this film. Devices shown are trained professional stunt vaporizers. Do not try this at home!

 
Last edited:

ChippyMalone

Be here now.
Accessory Maker
@ChippyMalone whats making it stick to the nano? I don't think the grinders magnet is strong enough for that
Strong but removable double sided 3M adhesive. Similar to rubbery stuff that looks like snot that is sometimes used to securely but temporarily secure parts of packaging together.

There is enough metal in the grinder base that it could be drilled to accommodate permanent screws if someone was so industrious. I'm happy with this easy low tech solution. I have a double thickness extra heavy 2" Mendo Mulcher coming that might or might not work better as a weighted base. One grinder or the other will end up on daily driver E-Nano.
 

beck420

Member
I am now the proud owner of a buckeye burl e-nano! I'll try to post photos but they won't do it justice, it really is very awesome. When I opened the box it almost looked like marble, until I turned it to see all the interesting markings. The front kind of reminds me of the big dipper constellation, glad I got this! Also this is a little bit shorter than my walnut version and both were bought around the same time, so I wonder if different heaters were used...that might explain why some run hotter than others. Thanks again to Andy @ACE OF VAPE and @Snappo for everything.




 

hafalump

Well-Known Member
:clap:BAM. i bought two additional "a justabowl" stems. Well, when you open a package you go for the small stuff first. So after saturating the two stems, I swap in the stem from the original box.
Well . I will report back when I return to this area of the"milky way" It is was not a problem with the nano, but the with the glass stems having a loose fit, I head other people had probs with the new Gon G. Maybe a problem with the new glass ? I thought sumpin wernt write, good know it's not the nano
Gonna need some stems......
 
Last edited:

exit

Well-Known Member
it's never been an issue on any of my pieces but the adjust-a-bowl gong glass joints are just slightly shorter than my other planetvape/joda gongs, and just a bit looser fitting. the joints aren't ground glass IIRC which might be what the issue is. i suppose your pieces could have a wider 18mm joint than the stock gong fits, but i am glad you found your first stem was a little too wide because now hopefully you can get proper hits on lower than 10 ;)
 

ataxian

PALE BLUE DOT
it's never been an issue on any of my pieces but the adjust-a-bowl gong glass joints are just slightly shorter than my other planetvape/joda gongs, and just a bit looser fitting. the joints aren't ground glass IIRC which might be what the issue is. i suppose your pieces could have a wider 18mm joint than the stock gong fits, but i am glad you found your first stem was a little too wide because now hopefully you can get proper hits on lower than 10 ;)
Adjustable bowls are lame!
A fixed glass disc is way better!
 
ataxian,
  • Like
Reactions: exit

lazylathe

Almost there...
My Nano is rocking again or still!!

It seems mine may be hotter than the average sun!
On 6.5 with the glass screen I get scorched herb.
On 6.5 with the adjusta-bowl set about an inch back I get incredible clouds, flavor and effects!!

This vape gets my tolerance down so quickly it amazes me every time!
After a few nights of 4 to 5 stems with about 2mm of herb I extremely medicated!

And all those stems add up to just under 0,1 gram!!

Take the time to experiment and set this vape up and it will blow you away!
 

Gray Area

Well-Known Member
Really, you don't like the adjust-a-bowl stems and gongs? I much prefer them to a glass screen that is stuck in the same spot.These allow you to use however much or little herb you want, without burning any.

I agree... I vary the size of load quite a bit depending on what mood I'm in. The adjust-a-bowls let me keep the load the same distance from the heater regardless of how much I've stuffed in there (or little) ;)

I lightly tamp the load 1/2" down from the top rim of the gong - which leaves about 2-3 mm gap between the heater screen and whatever is in the gong.... for me, this this is the constant, not the distance of the screen from the heater. 6.5 sweet spot too :tup:
 

exit

Well-Known Member
I don't own any non adjustable gongs but I wish I had a glass screen gong. My only glass screen gong is a 14mm.
 
exit,
Top Bottom