Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
Oh, I see what you're talking about - it looks like the reclaim spot is in the wrong place! Shouldn't it be on the bottom of that female connection?
Hedonismbot
Well-Known Member
This one is inside the US, and a bit more expensive, but many of us here have used it, and it works really well for the size too, 18mm Female joint and 14mm removable mouthpiece: known as the "infamous" bubbler.
http://www.pipesdaddy.com/product-p/vp-0022.htm
both are pictured here between the mini's and the D020...
I like the "infamous" bubbler because without the mouthpiece it fits comfortably in my desk drawer (upright with water). Here is a picture of my flower drawer with the infamous bubbler tucked in right next to my Solo.
jambandphan03
in flavor country
I recall somebody getting that piece a while back, and said the lower "jar" is a storage compartment, the tube is closed above where it connects, though I can't say for sure that this one is the same piece.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Lol, I just hit my nano and realized quit thinking that's for Errl it's just a cap in this concept. The previous ones confused me, I get it now. Just my dabbing prejudice I guess.
BoogerMan
Well-Known Member
I bought this on ioffer a while ago for $99
the female joint broke after about a month of use. It was partially my fault. I was putting my 7mm thick recycler ash catcher I have in the female joint of the honeycomb ash catcher to make a double ash catcher rig and when I was putting on the k clip to hold the 2 ash catchers together the female joint broke into 2 pieces. If it would have been $30 it wouldn't have been a big deal but I was pretty sad since it was $99.On a brighter note it did have a very smooth pull. However, the splash guard collects a ton of vapor oil so I feel like it is much better for vaporizing with a solo or lotus compared to using it for concentrates.
Also my 3 orb/planet mini oil rigs from Kathy shipped out today
I ordered just 2 days ago so I am very pleased with that! Should be here next week!Kathy also informed me they would be getting the hitman barrel to funnel recycler that btoc sales
yingmin may be getting them too!
Last edited:
snackmaster
Well-Known Member
This piece just works as an ashcatcher or bubbler depending on where you put the cap and mouthpiece. Cap on top + open bottom = AC. Cap on bottom + mouthpiece on top = bubbler.
PoopMachine
Well-Known Member
Got my replacement Nobius Stereo Faketrix from Yinmin5 today.. top perc is pretty crooked but its functional. It also was wet inside so I guess they tested this one for leaks. I wish the top perc wasnt so crooked and Im a little disappointed that they considered this a viable replacement. The first one I got had much straighter percs but alas it was busted pretty much all the way around the joint.
On the upside tho, its label free.
To the person who asked about using it with an Evo, without a Cloudbuddy (Or CloudPal), that would be a no. The stem is too close to the can for the Evo to fit.
On the upside tho, its label free.
To the person who asked about using it with an Evo, without a Cloudbuddy (Or CloudPal), that would be a no. The stem is too close to the can for the Evo to fit.
Cannabis Connoisseur
I LOVE LIFE
I'm ordering one tonight and he says itll have a label which is fine as long as the percs are straight this will be specified but may not be respected. I'm hesitant to order this piece considering as much negative feedback as its had but I'll place faith in Yingmin like a roll of Dice
PoopMachine
Well-Known Member
Even with the crooked perc, this thing stacks like crazy. For the money, I really cant complain but if you're going to make the thing, why not get the percs centered? It cant take that much extra time.
I think Im going to get some clear epoxy and a small paint brush and see if I can seal up the one that leaks like mad. Its pretty much cracked all the way around but I bet I can paint on some clear epoxy and make it look okay. The cracked one is much closer to perfect than this one, without the cracks of course
I wish this piece had a bent neck coming out of the top of the can. That would make it about perfect (With straight percs)
jambandphan03
in flavor country
try aquarium silicone, it's safe, and meant to seal glass. I found some on amazon... http://www.amazon.com/gp/product/B0002ASD2K/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1 been using this on my leaky Kathy recycler welds, so far one application has been holding, but I am sealing up pin holes, you might need to apply a bit more.
Last edited:
Cannabis Connoisseur
I LOVE LIFE
I just used the same stuff to repair a Fritted piece a couple of weeks back, works great and strong. Wish it could work on my Swagger Turbine 
Last edited:
PoopMachine
Well-Known Member
Thanks! Ill have to pick some up. I really wanted something that dries hard and not pliable but maybe I can figure out a way to squeeze this into the crack.
Why not Hxtal?
herbivore21
Well-Known Member
Hxtal is the duck's nuts for cracked glass you guys. That being said, the price of the product is more than any of the bubblers listed in this thread lol. However, a single purchase of hxtal will last ages, and many repairs (so long as they aren't ridiculous jigsaw puzzle type repairs lol).
By the way, my avatar and sig have sneak peaks at what I ended up getting for my dedicated oil rig
By the way, my avatar and sig have sneak peaks at what I ended up getting for my dedicated oil rig
PhotoRider
Diagnosed with level 11 G.A.S.
Oh, you guy's give my collection too much credit!@SprayingVomit beat me to it lol.
Link to @PhotoRider gallery. Literally it is a gallery of glass haha. Amazing. Everyone has been defeated in this contest.
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/index.htm?1
PLEASE DHgate make this!!
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/dux tripod oiler-1.htm
and this:
http://www.amazing-scenery.com/habits/PhotoRider_Glass_Collection/twisted oiler-1.htm
And so many more! I have officially just lost my mind
thanks for the positives on the Dux tripod oiler. USA made and under $200 - yes I said under $200 from a shop also. It wasn't on sale either. One of those: wow, only that much, mine things. Goes to show you can get excellent USA made glass without going hungry. DUX is a local artist to Kulture which is where I got it. This rig preforms and I would spend twice that without thinking.
flotntoke
thoroughly vaped
Even with the crooked perc, this thing stacks like crazy. For the money, I really cant complain but if you're going to make the thing, why not get the percs centered? It cant take that much extra time.
I think Im going to get some clear epoxy and a small paint brush and see if I can seal up the one that leaks like mad. Its pretty much cracked all the way around but I bet I can paint on some clear epoxy and make it look okay. The cracked one is much closer to perfect than this one, without the cracks of course
I wish this piece had a bent neck coming out of the top of the can. That would make it about perfect (With straight percs)
Not sure, but think the crooked percs come from trying to crank out too many pieces quickly. Not that they are even that sloppy putting them together. But if you've dealt with anything that needs to be very hot to work, you'll know that you have to keep it in exact same position through cooling or it will lean, flop, whatever. Again.... really not sure and have only played with hot glass a few times, but have always assumed they just didn't take care of the component until it was cool enough to have no flex.
ataxian
PALE BLUE DOT
You have more stuff than a SMOKE SHOP!
I bought more adaptors trying to keep up with @jambandphan03 which is a lost cause! She wins hand down!
You have so many water pieces I won't even think to compete with you.
My energy is in my garden.
"Cannabis is the HOLY GRAIL"!
Mister G
Deceptively Old Fart
Your confusing me with someone else. I only got 4 pieces right now and one on the way (I did break a few last year before going for cheaper stuff).
And if you count adapters and keck clips, I think YOU may be escalating this arms race. 
Mr. Gweilo 420
Dude
Just a little bit of further comment about the D0-Q. When combined with the E-nano this bubbler provided very, very fast extraction. I find that even if I pack a fairly large gong it is mostly done in one big hit with maybe a whispy one to follow. For example, a packed gong that would be good for maybe 2-3 nice milky hits and a couple of whispy ones is mostly done in one hit. I just keep liking this thing more and more everyday.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I got this locally under $50 for a full set. Hollow-foot honeycomb oil rig, flame-polished holes. Really nice on the flavor, the honeycomb isn't taking much out thankfully.
nihil
Member, Known Well
..Ahem.. joint size? 18mm?
And thank you for the feedback, I have one coming in myself. From your reviews I'm looking forward to this piece.
Mr. Gweilo 420
Dude
Yes it is 18mm female