ChooChooCharlie
Well-Known Member
Give it a try
I've used Crafty c/u on a Mighty, and my Muzzmod is made from a Crafty c/u though I use it on Mighty. I assume using Mighty c/u on a Crafty would work fine. I'm not saying that this would be an upgrade; I think the difference would be minimal.Would you guys recommend using a mighty cooling unit on a crafty? Will it crack my crafty since its a bit heavier? I feel like its a little upgrade
I use a liquid pad soaked in heated alcool in the microwave to clean the oven from my crafty and mighty. I put them upside down and I'm running the liquid pad until everything comes out. Then I repeat the process with kitchen paper and look like new.Ok i have my capsules clean on the outside:
I used a steel brush.
The inside is another history:
I even tried with a dremel. Iso with or without hot water did nothing.
I don't think I left them too long till cleaning.
I think it's about use and going always until 210C.
It's like the oven, my mighty oven is a lot more bad looking than the crafty. The crafty one never surpassed 195C.
are you sure it was the same unit and not a brand new?Just sent one in where the casing at the top was split open. About 18 months old. They sent the same unit back with a new casing and new cooling unit. Was hoping for a new one...all in all they fixed the problem so not complaining cost me about $15 for shipping
you need ryot packratz M size
I agree there should be some important highlighted sticky posts with most useful info like parts, adapters etc. What screens do you use in CU ? or non at all?Instead of a Forum, i.e. where people READ, this place is becoming more and more a Q&A chatroom...
Not that I'm complaining, I learned much after reading the 500+ pages of course, after filtering all the off-topic rubbish.
And while sure it's nice to have quick answer to (y)our questions a suggestion would be NOT to answer questions when the person making the question has clearly made no effort to locate an answer, either by reading the forum and/or using the search function.
OR it it just me?
To keep my post useful: screens size 12,5mm will fit in your dosing caps and prevent debris in your CU
V4M
A German friend of mine who is a popular canna activist, reviewer and also well connected to mj industries told me yesterday that he has heard from a reliable source that a new portable device by S&B is in the pipeline!
XenForo does a lot of things well. In fact it's probably the highest expression of what those of us in core developer communities focused on forums in the last 90s and early aughts were striving to achieve.Instead of a Forum, i.e. where people READ, this place is becoming more and more a Q&A chatroom...
Not that I'm complaining, I learned much after reading the 500+ pages of course, after filtering all the off-topic rubbish.
And while sure it's nice to have quick answer to (y)our questions a suggestion would be NOT to answer questions when the person making the question has clearly made no effort to locate an answer, either by reading the forum and/or using the search function.
OR it it just me?
To keep my post useful: screens size 12,5mm will fit in your dosing caps and prevent debris in your CU
V4M
did he mentioned any specific details?A German friend of mine who is a popular canna activist, reviewer and also well connected to mj industries told me yesterday that he has heard from a reliable source that a new portable device by S&B is in the pipeline!
For a company like S&B, the question for anyone wanting a new device in 2018 is, what was in their "pipeline" in 2015.did he mentioned any specific details?
@BigJr48 - airflow isn't changed. I read about removing the CU screen in this thread, tried it, and had great success. No more sticky residue goo on the top of capsule lids. Before removing the screen, I would be constantly changing out CU's to avoid resin drips on capsules. One of the reasons I acquired so many CUs. Now my capsules always stay nice, never even have to clean them.
Sorry, nothing detailed. And 2018 is too short in time. Probably next year he said.
It did not work that well for me.
Monday night I cleaned my CU and had all my capsules clean (outside at least). Yesterday was holiday here so I vaped like on a weekend day. This is my CU today:
Maybe 30 capsules, or some more a bit.
And you can already see a rim of oil around the capsule top.
Welcome, @wombat24 and best of luck to you on the path to fucking combustion. You made a great choice in the Mighty. Once I got into vaping herb, though it took a little while, the taste of any combusted smoke, including tobacco, started to become more and more unpleasant. I believe this made it a little easier for me when I did decide to stop cigarette smoking.greetings all! just thought I’d share my thoughts of the Mighty after one week’s ownership. Have been combusting for 30 years, used a vape once about 8 years ago (VapirNO2?) and I remember I preferred to smoke the AVB. Anyways after not thinking about it again I recently came across an article online that piqued my interest so I went on to eBay, typed “vaporiser” OK what to choose? I didn’t want to go too low or too high so I settled on the Hebe Titan 2 @ $35 – what’s the worse thing that could happen? (apart from burning or poisoning myself?) So, I decided I’d better check out the reviews. Down that rabbit hole I went soon discovering a world of vaporisers I did not know existed. It soon became apparent that no.1 in this game is S&B and soon began coveting the Crafty (it seemed to do the same job as the Mighty but had better size/shape) but I thought the cost prohibitive and started to think about a boundless CF or Starry Xmax instead. The more I read the more it seemed that the Mighty was the idiot proof option that I needed. An unexpected windfall was all the prompting I needed to dive in and get one.
So, what’s it like? Most of you would/should know Kubrick’s 2001: a space odyssey and in particular the opening “dawn of man” scene, well the black obelisk and the Mighty are one and the same! It was an awakening of cosmic proportions! The flavours, the tactile experience, the hit, everything was true!
I’m using the capsules exclusively and having fun experimenting with load size, packing technique, temperature surfing etc. A question, in group sessions, is it ok to do back to back caps or even back to back to back caps, does it risk overheating the unit? I some times find a full cap can be too much so I’m going to adopt Vaporcussion’s method and have ordered some Firefly concentrate pads as spacers.
One unexpected benefit is that since vaping my cigarette consumption has reduced by more than 50% straight away! I think I’ve found the missing link to finally rid myself of that evil stuff. yay.
I also recently delved into the world of coffee blending and roasting and the similarities are amazing; - the importance of a good grinder, matching the grind with the extraction method, the roasting of botanicals. I’m sure people have made tea from AVB but has anyone ever vaped coffee while it’s roasting hmmmm? Well I’ll leave that to the coffee/vape thread.
Catch ya down the track
It did not work that well for me.
Monday night I cleaned my CU and had all my capsules clean (outside at least). Yesterday was holiday here so I vaped like on a weekend day. This is my CU today:
Maybe 30 capsules, or some more a bit.
And you can already see a rim of oil around the capsule top.
A German friend of mine who is a popular canna activist, reviewer and also well connected to mj industries told me yesterday that he has heard from a reliable source that a new portable device by S&B is in the pipeline!