Wireless One-Hit Wonder Ball Vape by The Dab Hut and Crossing

[Oden]

Let's continue...


Setting up the WOHW is pretty easy - undo the two large screws on top with the included allen key until you have room to slide the coil in, once it's seated you can tighten the screws again. The heater sits nice and securely within the coil - it's just tight enough where an accidental smack won't send anything flying (good, because I'm clumsy ). According to the instructions it requires a burnoff at 600f for 15-20 minutes - the PID however defaults to 710f the first time it's turned on, so keep this in mind before you put the heater in for the burnoff!!

First up, diffuser mode. The closest I've ever had to a true diffuser-style experience has been bodging my Herborizer with extra glass bits - fun and all, but liable to end in disaster - so having a dedicated diffuser is much appreciated. I set the WOHW 5f below the recommended maximum of 560f (because I like it hot), loaded up a SQPful (approx 0.2g) of homegrown, let the WOHW sit on the bowl for 5 seconds and ripped it through my Herborizer sphere.

The name of the vape really is true. I got pretty much instant, dense vapour from a medium-hard pull, with the second pull completely clearing the bong - everything had already been extracted by the time I stopped inhaling my first hit! Compared to my Herborizer which needs at least 30 seconds and a medium-soft pull to get 3 or 4 slower, fluffier clouds (with stirring!), I am seriously impressed by this thing!

On the other hand, the injector end provided a far more familiar experience. I did change my flower choice for this bowl, going with some CBD instead, but at the same temperature.

This is what I'm used to with the Herborizer. Tasty, fluffy, slightly steamy clouds. It had a cleanup hit after this photo was taken. I have experimented at a lower temperature with the same amount and strain, using the diffuser, and I got a similar experience, just with slightly denser vapour. I suspect that I will only use the diffuser end with the included matrix bowl, and the injector end with any glass bowls I may have knocking around.

This appears to be somewhat compatible with 18mm male joints and basket screens, but I have not tried vaping with one yet as I suspect that sticking will be an issue. There is a microdose bowl option available to those who want it however, and whichever retailer you choose to buy the WOHW from will almost certainly stock the microdose bowl.


All in all, this is the bee's knees. The dog's bollocks. Insert another rhyming platitude here . It does exactly what it says it will do, and for that I really can't fault it much. Time will tell if any issues arise, but out of the box I have pretty much nothing bad to say about this (except my grumbling about stir tools).

I can't see this fully replacing my Herborizer for now, since I do still value that slightly slower extraction, but it will likely be my daily driver. I will be testing this against both my Herborizer and my friend's B0 over the coming week, as well as with a banger and dabs, so I may post again before the week is up.

If not, see you all after the honeymoon period

Thank you very much for this review of this kit!
You convinced me to buy one
I'm happy because it's now available in my country, I wouldn't need to buy this kit from a foreign country, and suffer the shipping costs and customs taxes lol.

I did well to wait for its availability.
It looks amazing, and with the micro dosing bowl it will be very versatile

 

[solidsnake02]

Let's continue...


Setting up the WOHW is pretty easy - undo the two large screws on top with the included allen key until you have room to slide the coil in, once it's seated you can tighten the screws again. The heater sits nice and securely within the coil - it's just tight enough where an accidental smack won't send anything flying (good, because I'm clumsy ). According to the instructions it requires a burnoff at 600f for 15-20 minutes - the PID however defaults to 710f the first time it's turned on, so keep this in mind before you put the heater in for the burnoff!!

First up, diffuser mode. The closest I've ever had to a true diffuser-style experience has been bodging my Herborizer with extra glass bits - fun and all, but liable to end in disaster - so having a dedicated diffuser is much appreciated. I set the WOHW 5f below the recommended maximum of 560f (because I like it hot), loaded up a SQPful (approx 0.2g) of homegrown, let the WOHW sit on the bowl for 5 seconds and ripped it through my Herborizer sphere.

The name of the vape really is true. I got pretty much instant, dense vapour from a medium-hard pull, with the second pull completely clearing the bong - everything had already been extracted by the time I stopped inhaling my first hit! Compared to my Herborizer which needs at least 30 seconds and a medium-soft pull to get 3 or 4 slower, fluffier clouds (with stirring!), I am seriously impressed by this thing!

On the other hand, the injector end provided a far more familiar experience. I did change my flower choice for this bowl, going with some CBD instead, but at the same temperature.

This is what I'm used to with the Herborizer. Tasty, fluffy, slightly steamy clouds. It had a cleanup hit after this photo was taken. I have experimented at a lower temperature with the same amount and strain, using the diffuser, and I got a similar experience, just with slightly denser vapour. I suspect that I will only use the diffuser end with the included matrix bowl, and the injector end with any glass bowls I may have knocking around.

This appears to be somewhat compatible with 18mm male joints and basket screens, but I have not tried vaping with one yet as I suspect that sticking will be an issue. There is a microdose bowl option available to those who want it however, and whichever retailer you choose to buy the WOHW from will almost certainly stock the microdose bowl.


All in all, this is the bee's knees. The dog's bollocks. Insert another rhyming platitude here . It does exactly what it says it will do, and for that I really can't fault it much. Time will tell if any issues arise, but out of the box I have pretty much nothing bad to say about this (except my grumbling about stir tools).

I can't see this fully replacing my Herborizer for now, since I do still value that slightly slower extraction, but it will likely be my daily driver. I will be testing this against both my Herborizer and my friend's B0 over the coming week, as well as with a banger and dabs, so I may post again before the week is up.

If not, see you all after the honeymoon period

This is such a great write-up and incredibly spot-on to how the device functions! I couldn't say it better myself. Any one who is offering this has a real value based kit on their hands that can compete with the best of them.

I just got back from running a dab bar using this and the Ruby Twist. They obviously both blow people away with each new person to try, but when it comes to events outside in the Midwest, during December, the Twist shined a bit brighter. Combating cold ambient temps is so much fun!

A de-bowler, or stir tool would certainly be a good value add to the bundle. I'll have to consider that. I began including Ti screens, but more due to the micro size giving me a bit more open airflow. I don't personally notice a taste difference, but some may.

The name does say it all. There are definitely cheaper parts that you can put together for a similar/better experience, but the overall value is there out of the box. Can't wait to see what you think after stress testing it. After several iterations and a lot of testing it seems to have good longevity, even though you'll have a half anodized/half raw Ti look after a while. Maybe that's the biggest downside? The dual diffuser/injector design doesn't lend well to getting the entire heater inside the 25mm coil. Stretching it on that dock is possible but you have some height limitations.

Enjoy and happy flower dabs!