ilovebOObs
can i stick my male joint in there?
new aquavape came today. i have alot of testing to do 
Vaporfection - the AquaVape Inline Vapor Cooler
- Thread starter sam urai
- Start date
Vapinghole
Low-Temp Hempist / JedHI Master
new aquavape came today. i have alot of testing to do
That's right, bOObage! And you have a lot of pics and vids to post of your bOObology experiments. Get to work!
Received one a month ago. Have been using it ever since. Works great with whip on my Extreme Q. Takes away "burned" taste when vaping the bowl too long.
I love mine with the EQ - for me they're the perfect match. It's especially great for groups, as you get the water filtration without needing two hands and a long explanation for noobs.
stickstones
Vapor concierge
boobs...what does it take to mate this thing with the Solo?
ilovebOObs
can i stick my male joint in there?
I use the silicone tubing from a regular HI turbo tube. I can post pics if u need it.
stickstones
Vapor concierge
don't sweat the pics. so you stick the silicone inside the solo crucible and then connect everything else. I assume this makes a floppy connection that requires you hold both pieces together?
havealight101
Norski
Boobs, do you think it could connect to your omi v2? I ask, because I have the persei, and have been running in through a 15" Incredibowl M420(works really well, I might post a pick in milkshots for a laugh), but some water filtration would be nice.
ilovebOObs
can i stick my male joint in there?
her are some pics anyways bud. i'm using my short stem but you can use your regular stem the same way. with my short stem i can use the solo/aquavape 1 handed. also 14mm solo gong stem works well to. one thing to watch out for is the draw. its gonna be hella stiff sticks but if you do my stem mod then it will work great.
same concept just need a little tubing. the omicron milks the aquavape like crazy.
stickstones
Vapor concierge
nice boobs...thanks! I want to work where you do!
Frederick McGuire
Aggressively Loungey
Oooh, tag me in b00bs 
I use a little bit of 7th floor tubing to mate my Aqua-Vape with my Solo.
If I'm using the Aqua-Vape, it usually means I'm in bed, so I like using a full bent stem. That way, if I'm lying down, with the solo horizontal on the bed, the Aqua-Vape is at a nice angle for me to sip on.
I have my tubing about 2 inches long. It means the Aqua-Vape won't hold itself up, but there is more flexibility, like a micro-whip or something.
I also recently cut a little carb hole in the tubing so that I could clear the Aqua-Vape if I want to.
I also hook my Omicron V1 up to the Aqua-Vape, using the same 7th floor tubing, i put the silicone mouthpiece of the omi in the end of the tubing and it creates a perfect seal.
It takes a bit more effort with the timeout and all on the V1, but it works well.
I use a little bit of 7th floor tubing to mate my Aqua-Vape with my Solo.
If I'm using the Aqua-Vape, it usually means I'm in bed, so I like using a full bent stem. That way, if I'm lying down, with the solo horizontal on the bed, the Aqua-Vape is at a nice angle for me to sip on.
I have my tubing about 2 inches long. It means the Aqua-Vape won't hold itself up, but there is more flexibility, like a micro-whip or something.
I also recently cut a little carb hole in the tubing so that I could clear the Aqua-Vape if I want to.
I also hook my Omicron V1 up to the Aqua-Vape, using the same 7th floor tubing, i put the silicone mouthpiece of the omi in the end of the tubing and it creates a perfect seal.
It takes a bit more effort with the timeout and all on the V1, but it works well.
havealight101
Norski
Are you guys using 1.5 ohm carts? If not, you should. I feel they almost put out the same vapor as 5 ohm @ 7.4v on the persei. I can milk up that 15" Incredibowl pretty quick(7-10 secs) with 1.5 ohm @ 3.7v, no point for me though cause 4ohm @7.4 is instant whole milk. Thanks for the pics. Any suggestions as to where is the best to order from(US)?
jambandphan03
in flavor country
I've got both the large and small AV, loving this device. Using the small w/ my solo, and thought about selling the large one in the classifieds, but I might just put it in line on my desk vape. It's a hard call, because even thought the larger one is a bit heavy and too big for my solo, I still like it, and think it works really good. Maybe I'll hang on to it a while just to give it more of a chance.
I had just ordered and received some silicone tubing from http://www.mcmaster.com/#catalog/116/121/=gz448v I had not considered using the omicron silicone mouth pieces. I just put one on the top of my large AV as a mouth piece, and used another one (cut) to connect the large AV to my omicron cart. Nice idea... I was not using them for anything since my 510 drip tips fit the omi-cart. Also using a 1.5om, and it does produce way better than the 2.4, almost instantly.
I had just ordered and received some silicone tubing from http://www.mcmaster.com/#catalog/116/121/=gz448v I had not considered using the omicron silicone mouth pieces. I just put one on the top of my large AV as a mouth piece, and used another one (cut) to connect the large AV to my omicron cart. Nice idea... I was not using them for anything since my 510 drip tips fit the omi-cart. Also using a 1.5om, and it does produce way better than the 2.4, almost instantly.
MrNorml
Well-Known Member
If it's full of water how do you set it down?you would indeed think so, but if its attached to a whip the roll factor is dramatically cut down
and if you coil up the whip when setting it down like this it aint goin anywhere
and with an FC discount you can get them pretty cheap IMO
highly recommended
jambandphan03
in flavor country
Hey Boobs, thanks for posting all the pics, it was your AV porn (in the solo thread) that got me interested in the AV. They are great!!
ilovebOObs
can i stick my male joint in there?
the aquavape is so useful i think every vaporist should have one.
2clicker
Observer
its made to be spill proof and works very well in that regard. you basically have to blow into it to push the water out. the spill proof feature can make it awkward to clean, but it gets easy with experience.
co-signed
Vapinghole
Low-Temp Hempist / JedHI Master
Agreed 100 and bOOb percent!
havealight101
Norski
I trier to get a AV 5" from vapornation, but after 3 weeks on back order I had to pull the order. I better give em' a call again.
stonedwarman
I got paid to kill people.
that good? haha...i think i will get one for my vivape then. looks pretty sick...turns your vape into a water pipe (kind of).
ilovebOObs
can i stick my male joint in there?
yeah its pretty cool, also worth taking a look at a zap bubbler if you want a gong joint.
havealight101
Norski
Just got my small AV today, and what a nice tool it is! Much easier than my crappy micro. Thanks all for the info. I'm eyeing that Zapbub now...basically boobs needs to stop making vids, because each one is sick, and will end up in my man cave eventually, no boobious though, that's one of a kind. I always hated water pipes back in my combustion days mainly due to a bad incident with freinds moldy rig. I've been converted...can't wait for my HT as well. Thanks again.
havealight101
Norski
Bummer, my perc sleeve broke off inside. Clean break at the base. This hasn't seen any impacts at all. Still works fine, but is noisy now. Air get out through the bottom and rattles when pulling hard. I'll try vapornation, but don't expect much. I'll still attach it to all my tools till a cloud or fritter comes my way. Even with a rattle, I'd still recommend it to anyone who wants some cheap water filtration for their vapor.
jambandphan03
in flavor country
That sux havealitght... I just posted a classified for my large one, it's just not getting used much, and I have added a bunch of new glass into my collection, so I'm moving it along...
havealight101
Norski
My 5in AV tube withthe 5 holes broke off at the base after about 3 1/2 weeks of use. Now it just rattles in there, still works, but rattles.I set it onthe table and came back shortly after,and when i picked it up,it was rattling...Talked toCS @ vapornation the next day, nice guy, actually had his own AV, but said Vaporfection likes to take care or their own warranty claims. So I just got off the phone withDan @ vaporfection,anothernice guy, and he was quick to offer a replacement and offered my choice of size also. I got to chat with him about their heater cores for a while. Interesting stuff, I may have to stroll through their threads when I have a chance,and keep an eye out for their portable. I also heard the AV is hand blown here in the states, which I was unsure of.
Overall, a class act over there at Vaperfection. It's great when a company stands behind their product.
Anyone who is curious about water filtration, these are a perfect starter piece. I have attached it to every vape I own, and love it.
Even with a Fritter on its way, I still see the AV getting plenty of use. My broken smaller one will be give to a less fortunate(knowledgeable) vaporist I know, he's been wanting a good water price for his MFLB for a while.
Thanks guys.
Overall, a class act over there at Vaperfection. It's great when a company stands behind their product.
Anyone who is curious about water filtration, these are a perfect starter piece. I have attached it to every vape I own, and love it.
Even with a Fritter on its way, I still see the AV getting plenty of use. My broken smaller one will be give to a less fortunate(knowledgeable) vaporist I know, he's been wanting a good water price for his MFLB for a while.
Thanks guys.