Vicki
Herbal Alchemist
That is exactly how I use mine when I am at home! I can milk the living crap out of it with the Pinnacle.
Vaporbrothers Dabbler & Eleven Pen
- Thread starter Abysmal Vapor
- Start date
That is exactly how I use mine when I am at home! I can milk the living crap out of it with the Pinnacle.
PPN
Volute of Vapor
I don't know about VW but you can get the full kit and accessories to LCV in France or a german website sold it ( I don't remenber the name, you can find it in a french thread about vaporizer shops in Europe).
Good choice I'm really enjoy with my Dabbler!
We can ship the heaters internationally.
Rumor has it end of next week the glass tubes should be back in stock. Not sure about the ceramic core heaters.
Happy new year everyone.
We have the glass tube heaters in hand- shipping out asap! All were checked hot, ohms, visual, various scopes, etc. A few were murdered by destructive testing and they held out really well until the end. The o-rings stick and the glass breaks sometimes, but that's basically all we found. I like this thing for the way it loads super easily. It's also cool looking being straight and a totally luxury to see the smoke.
On another note, frustrated by a problem that plagues many 510 type vapor pens, an engineer here fixed a bunch of "pushed down" heater contacts himself. Crude and innovative. If you had this problem and like to imitate, be my guest.
What you're seeing here is a dot of solder to make the pushed-in contact stick up again.
On another note, frustrated by a problem that plagues many 510 type vapor pens, an engineer here fixed a bunch of "pushed down" heater contacts himself. Crude and innovative. If you had this problem and like to imitate, be my guest.
What you're seeing here is a dot of solder to make the pushed-in contact stick up again.
OF
Well-Known Member
Another thing to try is just pulling it back out. Typically the two lead wires come down, one inside the other outside of the rubber bushing under the button. The button is then jammed in, making contact with the lead inside the bushing and forcing the other into solid contact on the outside. Normally the rubber is a bit of a spring to ensure contact, but if you move the cart around from battery to battery a shorter socket can push the pin further in.
I have a tiny hook in the end of a safety pin. It's bent over at right angles and is maybe 1/16 inch long. I use it to hook out screens and stuff, but here I can fish it down the side of the button, rotate it 90 degrees under the head and lift it up a bit. It doesn't take much. I've got some carts I've had to pull up several times....they're old friends and they get moved around some.
I bent the pin by heating with my torch lighter, but you can cold form one nearly as good. Just keep it small and the point intact.
OF
Great news, the glass tubes should be at the warehouse tomorrow for immediate shipment. 
aesthyrian
Blaaaaah
Sure does
Sorry for the noOb question, but what advantage does the glass tube heater have over the standard one that comes with the unit?We have the glass tube heaters in hand- shipping out asap! All were checked hot, ohms, visual, various scopes, etc. A few were murdered by destructive testing and they held out really well until the end. The o-rings stick and the glass breaks sometimes, but that's basically all we found. I like this thing for the way it loads super easily. It's also cool looking being straight and a totally luxury to see the smoke.
On another note, frustrated by a problem that plagues many 510 type vapor pens, an engineer here fixed a bunch of "pushed down" heater contacts himself. Crude and innovative. If you had this problem and like to imitate, be my guest.
What you're seeing here is a dot of solder to make the pushed-in contact stick up again.
Sinclue
OK disagree with me, I can't force you to be right
Visual of heater coil in operation, cool visual of globe filling with vapor, and easy check on amount remaining.
So no mechanical difference.. thanks
Sinclue
OK disagree with me, I can't force you to be right
No exactly, sorry. There's still the wire/coil type and the material it is made of to consider. It not just slapping a glass globe over the existing system. Usually involves a different heater coil. There are many here who can go on about the differences, advantages, etc., but I tend towards thinking about the lyrical, visual, and fun aspects especially considering the decades of crap my lungs have absorbed. Vaping is certainly the icing on the cake.
thx
bagelbanger
Well-Known Member
Hi there.
I *think* this might be the new toy for me but just want to be sure. Read through the thread but just want to see what some of the people that have been using this for a bit think.
Would be mostly using this for weekends away with homemade abv QWISO. Would love to get my hands on some BHO but right not its not available to me. I would be able to recharge at some point but would appreciate a long battery life. Guess my question is 'would abv QWISO work in this or would it be nasty and gross?
Thanks in advance!
I *think* this might be the new toy for me but just want to be sure. Read through the thread but just want to see what some of the people that have been using this for a bit think.
Would be mostly using this for weekends away with homemade abv QWISO. Would love to get my hands on some BHO but right not its not available to me. I would be able to recharge at some point but would appreciate a long battery life. Guess my question is 'would abv QWISO work in this or would it be nasty and gross?
Thanks in advance!
QWISO will work in it, but it's QWISO. Don't expect great flavour, especially from ABV QWISO.
bagelbanger
Well-Known Member
Thanks pakalolo! Kinda figured that the flavour wouldn't be great. I'll probably stick to mixing it up with flowers and using it with a UD for now.
Small batch of glass tube heaters arrived today and are now available on the site. I received e-mails from a few forum members about these and I promised I would post here first as soon as we received them.
tepictoton
Well-Known Member
Helo to al here in this busy thread. After my BHOLT died out on me and I made some pretty scary discoveries I think it is time for me to come to the dabbler side of things...are there any fc codes i should be aware of?
am interested in the new glass tube heaters but will have to see what shipping costs will come down to when ordering direct from vaporwarehouse....
any info on a code would be appreciated.
Edit: seems like I cannot order it, it will not accept my zipcode for one reason or another...
Edit 2: ah I see, it does let me choose it later on in the order process. Would come down to 70bucks shipped for two glass heater tubes...still alot, no coupon codes at the moment?
am interested in the new glass tube heaters but will have to see what shipping costs will come down to when ordering direct from vaporwarehouse....
any info on a code would be appreciated.
Edit: seems like I cannot order it, it will not accept my zipcode for one reason or another...
Edit 2: ah I see, it does let me choose it later on in the order process. Would come down to 70bucks shipped for two glass heater tubes...still alot, no coupon codes at the moment?
Last edited:
aesthyrian
Blaaaaah
You just missed the super bowl sale
I would sign up for their mailing list. They send out coupon codes in those that are usually 5% off.
You can sign up for the mailing list near the bottom of the page, where the green background starts again. In firefox it is partially hidden (at least for me) so you may not see it at first glance.
Besides that I would watch this thread and check your e-mail. Vaporwarehouse seems pretty good with their sales and maybe they will have some sort of Valentines Day sale? @VaporWarehouse ?
Also, buying from Vaporwarehouse is a good idea. A.J. Over there is the man and has helped me so much. It would great to have the caliber of customer service that Vaporwarehouse provides with my other purchases in life.
I just ordered from Vaper warehouse and guy was super helpful...
I cant vouch for this place, but they have great prices on ego-c, ego-v, and spinner
http://www.virginvapor.com/collections/electronic-cigarettes
I cant vouch for this place, but they have great prices on ego-c, ego-v, and spinner
http://www.virginvapor.com/collections/electronic-cigarettes
Vitolo
Vaporist
@VaporWarehouse is always super helpful!
Currently the only codes we have are for the vaporizers, not accessories.
Also, buying from Vaporwarehouse is a good idea. A.J. Over there is the man and has helped me so much. It would great to have the caliber of customer service that Vaporwarehouse provides with my other purchases in life.
Wow, thank you for the compliment.
