Discontinued Vapolution 2.0

ataxian

ataxian

PALE BLUE DOT
Vapolution Vaporizers said:
I wanted to let all the FC members know that the FC4LIFE code is no longer valid. We have a new website as many of you have noticed and we have dropped our price across the board by $25, so everyone can enjoy the discount you fine people have been getting for so long.

Along with the price drop, we have released an new package called the Purity Package. The Purity Package removes the 2 whips and 2 straight bowls and adds an All-In-Wonder Bowl. This package is for people who want an all glass vapor path right out of the box. The Purity Package sells for $99.99 everyday.

We have also added an Infusion Package to the lineup. It adds an Infusion Bowl to the Standard (Used to be Basic) Package. The Infusion Package sells for $124.99 everyday.

We have also started selling the infuser in parts, so you can piece one together for yourself, buy a piece if one gets broken or buy just the Infusion Bowl and use it just like a straight bowl without the need for the plastic washer.

We also have an Oil / Wax Bowl in the works. Stay tuned for details. I do not have too much concentrate experience, but the prototype oil bowl we have here makes a ton of delicious vapor with just a dab of oil.

I would like to update the fist post of this thread so everyone is not confused about the promo code, but I cannot figure how to do it. If anyone can help with this it would be much appreciated. Thanks
Click to expand...
VAP3?
 
ataxian,
  • Like
Reactions: Mrmrmrmr
xRUFUSx

xRUFUSx

special like everyone else
Enjoying some "Dutch Treat" while infusing "Pinneapple Chunk."
Vapolution Vaporizers said:
I do not have too much concentrate experience, but the prototype oil bowl we have here makes a ton of delicious vapor with just a dab of oil.
Click to expand...
Please tell your superiors that we demand they buy you an 1/8 of some good wax, or at least some bulk full-melt. :) For research.

The old FC deal showed me to the light of direct-draw. I would have never believed the taste potential without the AIWB.

:soapbox: People, if you haven't vaped flowers with an all glass path of 12" or less before, there's still something new to experience from your same ole' herb.
 
ataxian

ataxian

PALE BLUE DOT
Tom Funk said:
I haven't used the VAP2 but @Vapolution Vaporizers, in response to my question about load size stated a page or two ago that the AWIB, Straight Shooter and Infuser all work with 0.1-0.2g. I'm guessing you might have trouble getting less than 0.1 to stay in there properly.
Click to expand...
It uses less than say a SOLO.
Tomorrow I will weight a AIWB and verify however the infused may use .1 to .2 but the AIWB much less!
 
Tom Funk

Tom Funk

Well-Known Member
ataxian said:
0.05 easy!

Just checked!

Observation:
The VAP2 consumes the least amount of material of my other vaporizers if that's a concern?.
Click to expand...

Usually I only vape one load in the T1 or Solo and stop before the flavour completely runs out. Sometimes I like to finish on the start of a new load, just to finish my session on maximum flavour. It's nice to be able to do this with a very small load.
 
Tom Funk,
vapirtoo

vapirtoo

Well-Known Member
I love the vapor barrel even though it is big and clunky. The hits are cooler and the taste is still there. I think the all in wonder bowl has the best taste but the difference is small.
I've been infusing some buds for the past ten days,and when I pulled a small bud from the infuser, it was very resinous and had the effect of
an oil high. Very powerful and quite tasty.
The problem is having the discipline to keep infusing without taking any out to try. I wanted to wait until April , but I keep going in and then restocking the chamber.
I like problems such as this. :science:
 
Tom Funk

Tom Funk

Well-Known Member
I was looking at the infusion bowl/new straight bowl on the Vapolution and was wondering if you could use a Pinnacle Hydrotube on top of this like you would on a Solo stem?
 
Tom Funk,
  • Like
Reactions: ataxian
axakal

axakal

Well-Known Member
from my understanding the mouthpiece of the bowls could become somewhat of a problem for a direct connect. but i can only judge by pictures as of now.

Tom Funk said:
Yes. But would it work without an adaptor - like the Solo stem will go straight into the hydrotube?
Click to expand...
 
Last edited:
axakal,
  • Like
Reactions: Tom Funk
RUDE BOY

RUDE BOY

Space is the Place
I tried the infuser with the PNWT and the mouthpiece mates pretty well with 14mm female end of the tube but doesn't make a perfect seal like ground glass would so you have to make sure it sits in the right position to only pull through the stem. Also I was a little paranoid putting to much weight on the stem.

I didn't try with the straight shooter but the mouthpiece on it is a bit smaller and fits tighter then the infuser mouthpiece, each mouthpiece will be a little different.

I still pretty much have no need to run the Vapo through water. I love it dry.
 
Tom Funk

Tom Funk

Well-Known Member
RUDE BOY said:
I tried the infuser with the PNWT and the mouthpiece mates pretty well with 14mm female end of the tube but doesn't make a perfect seal like ground glass would so you have to make sure it sits in the right position to only pull through the stem. Also I was a little paranoid putting to much weight on the stem.

I didn't try with the straight shooter but the mouthpiece on it is a bit smaller and fits tighter then the infuser mouthpiece, each mouthpiece will be a little different.

I still pretty much have no need to run the Vapo through water. I love it dry.
Click to expand...

I actually meant to put the Hydrotube on to the straight bowl part of the infuser set-up without the infuser and mouthpiece. Does this work?

Like you I probably won't use the VAP2 with water much as I'm after maximum flavor but occasionally when the air is really dry around here or my throat is shot from over using my voice in my job I might like to use water. Would be cool if I could do it without loosing the all glass air path.
 
Tom Funk,
RUDE BOY

RUDE BOY

Space is the Place
Tom Funk said:
I actually meant to put the Hydrotube on to the straight bowl part of the infuser set-up without the infuser and mouthpiece. Does this work?
Click to expand...
I tried to rig something up with the infuser bowl and a male/male 14mm gong but was unsuccessful in the endeavor. I am pretty sure you can make it work if the desire is strong, but I didn't want to spend anything on the project and tried to make it work with what I had on hand. So I gave up after only an hour or two.
 
Tom Funk

Tom Funk

Well-Known Member
@Vapolution Vaporizers, I see that your shipping charge to Australia for a vaporizer package is $40 (or thereabouts). Is there lower shipping rates for accessories? It would be a bugger to break an AIWB for example and have to pay the replacement cost + $40.

Also, I know the VAP3 will be able to take larger loads than the VAP2 but will it be effective with as small a loads? I'm thinking the AIWB and other all glass attachments.

If not, will you keep selling the VAP2?
 
Tom Funk,
You must log in or register to reply here.
Top Bottom