Vapman

Melting Pot

Melting Pot

Sick & Twisted
bounce5 said:
Interesting...I wonder if there is a way to make a silicone ring adapter in order to make an airtight connection. Are you using anything or does it work in the pipe without any silicone?
Click to expand...
I used Teflon tape gonna take a silicon off nano stem try that.
All my water pieces are 18.
The pipe seems like same 18.

Where there's a will there's a way
You can do it !!!!
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Melting Pot said:
You can do it !!!!
Click to expand...
post-25179-you-can-do-it-all-night-long-g-RsDu.gif
 
simpleasthcis

simpleasthcis

... As a box of ....
M0J0 said:
Man, I really likee the last mouthpiece on the right. I'm going to have to make me one of these!

What did you use for the metal rods that lock under the springs? Did you take them from another mouthpiece?

And what type of wood did you use?

Great work. Thanks for posting.
Click to expand...
Thanks one and yoall from left to right
Red ceda it's like a ball n scokit to fit a VM mid section you can adjust the angle if you've got drippy oil ect,
VMware pear wood,
NZ kauri king of the forest (ting about trees way back),
Pitch pine .thanks for the interest @OF I've got loads of Hawthorne as @vapman
Has sold out :bowdown:mojo I got a load of spares one time @natural farmer the Swiss knife has. Ream on it start small and work inside out or cheat and use a drill :mad: .
@bounce5 I don't think it needs to be air tight justtightish you've still got the air holes on the mid :2c: nice glass @Melting Pot if vapman wants to cut his over heads cheek this guy A-mazing peace all wevapeople :wave:
 
Last edited:
herbivore21

herbivore21

Well-Known Member
Jeezus look at all this modding going on lol! Makes me wanna get my modding hat on again, haven't really tried my hand since making my custom GonG for the PNP (Worst vape I've used by the way!).

Just thought I'd drop by to say that I have also received confirmation that I shall be joining the Vapman family very soon, with a vapman station :D

Anything I should get apart from truckloads of concentrate screens? How does this go connecting to gong joints?
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
I'm so weak, I couldn't even make it a half of a week... :disgust:

Emailed Rene and told him my bad news, but hopefully it opens the door to another medical patient in need!

Here are my combustion vaping bowl pics (My Helix attachment feels so left out):
fRLfx5O.jpg


ltSOmnh.jpg


kObPyAf.jpg
 
OF

OF

Well-Known Member
M0J0 said:
This lathe is awesome. If I could do with my hands what this guy can do with his feet, I would make me one of these!
Click to expand...

I heard that. I bet it's not his first one.......

And I'm thinking he could teach those guys that make Samurai swords a thing or two about sharpening old files and saw blades to perfection.

There's a similar traditional lathe, the "Springpole". You use a peddle/treadle to pull the string down, and a bent pole as a spring (as a kid I used an old fly rod) to pull it back up. Gives you two hands and saves your back. And a longer stroke I think since the pedal is a lever.

The problem is it only cuts one way (where have we heard that?). Even when the finish is good, placement of the tool and it's attack orientation to the work is much more critical than no normal spindle lathes (where the rotation is usually faster and only one direction). Very hard to do fine work (at least it was for me), conventional lathes are much easier and forgiving.

My hat's off to the fellow for sure. It's be a neat chess set to own, wouldn't it? In a better world he could feed his family for a LONG time on the dollars the right owner 'stateside' would pay........

OF
 
kahlilhc

kahlilhc

Vaped Crusader/Serial Vapist
:wave:Hey Vapmaniacs!

Vapman doesn't just make good beach vapeporn:brow:(page 27).....It might not be the most practical device for the environment, but I had to include it in the roster.

Vapman in Whistler:D




BONUS EDIT: Breakfast Of Champions!
 
Last edited:
simpleasthcis

simpleasthcis

... As a box of ....
SSVUN~YAH said:
You had it right for a minute, all I had to do then was hit refresh. Like @Melting Pot said use bb code usually the direct link. Nice stem!!!
N7TQyK5.jpg
Click to expand...
Thanks for that and melting pot I tried but am easily tired of computers :bang:
@bounce5 it draws nice no air holes yet as is got volume, i used a drill through this one then I'm just whittling away to a basic shape then lots of sanding,the ss filter will give you the pin holes :cool: I think it's sycamore ?
 
bounce5

bounce5

Well-Known Member
@simpleasthcis Nice! I assume you removed the pins from a VM middle section? How do you remove the pins? - I assume with pliers. Can they be put back to the original VM middle section later? Are they held in with pressure or glue on the VM middle section? Are they held in with pressure or glue in your homemade sycamore mouthpiece? Is that branch behind the vapman where you got the material? I might try this...
 
killick

killick

But I like it!
So who has 2 thumbs and a spanking (slightly skunky) brand new Vapman? This guy (insert pix of thumbs here :) Anyways, it smells skunky cause I overfilled, then emptied and refilled, and tested it out. As soon as I figured out the Butane thing (it's been a long time since I fumbled with a lighter). It's even smaller and cuter than I had imagined! But easily pocketable. Anyways, it's 130 pages in, and you all know how great it is, so lets continue...


Thanks to @vapman for sending the extra pieces along! The package that came from Switzerland contained an additional mouthpiece and 6 screens, so I'm not kicking myself for only ordering 3 - thanks so much for that wee addition! I'll be testing it out as soon as I get it nicely seasoned with my special flowers.

This is a cute wee unit! I like that I now have a vape not hobbled by batteries, and that it comes in sucha cute package. Did I mention cute? :)
 
simpleasthcis

simpleasthcis

... As a box of ....
bounce5 said:
@simpleasthcis Nice! I assume you removed the pins from a VM middle section? How do you remove the pins? - I assume with pliers. Can they be put back to the original VM middle section later? Are they held in with pressure or glue on the VM middle section? Are they held in with pressure or glue in your homemade sycamore mouthpiece? Is that branch behind the vapman where you got the material? I might try this...
Click to expand...
Yes mate from the branch behind I'm blessed with trees here, I got a few spare pins n screws one time from René bot yeah they friction fit they'll come out easy when your mid is warm . No adhesives have ever been used to make vapman
That's one of my favourite things :tup: you can do it ^^^lol
 
IAmKrazy2

IAmKrazy2

Darth Vapor
Got my Walnut classic lighter and screens. I know others including Rene have said the basic and classic have the same performance, but the classic seems to heat up a lot faster to me. My First load was just short of combustion as i am accustomed to the vm basic. Either Way, i am enjoying my new VM.

The vm lighter is not bad, and comes with a nice leather case. It is a lot like the small honest lighters but with a bigger tank.

Also, bought 9 screens and received one extra along with the little vapman tool. Thanks @vapman
 
You must log in or register to reply here.
Top Bottom