Underdog Log Vapes

underdog

shade-tree vapor engineer
Manufacturer
It has taken a little getting used to, but I'm starting to pull some really nice clouds from my pup. I'm vaporbonging with my inline bong with nice success. The hits seems to start small, and then increase over the length of my hit. So the longer I pull with a nice slow draw, the more my bong really clouds up. This is the exact opposite of how I normally vaporbong with the EQ, Vapolution, etc...

Or am I just really, really stoned and overthinking this? :mental:

That's more or less my experience too, though I think to be totally sure you should try a few more bowls and see... haha. :p
 
underdog,

Gonzo

Slightly Stoopid
IME a slower draw will yield denser hits with the log vapes. This is just been my experience. Either way, my UD will fog up glass with the best of em....
 

Stu

Maconheiro
Staff member
That's more or less my experience too, though I think to be totally sure you should try a few more bowls and see... haha. :p
I'm on it!:brow:

Edit: After further research, I think I was drawing too slow. Hard rips are getting me some really foggy doggy glass now. It has actually made watching Survivor intersting. :lol: As they widdle by the campfire, I'm widdling away at a stem to make for the perfect fit for a 14mm downstem.
 
Stu,

OhTheAgony

here for the chicks
I find draw speed doesn't matter that much if I set it hot and use a little more herb (0,1ish). You'll need a variable PSU for this though. Although, my 14,3V may not even be that much more than 12,5V is to most dogs, so perhaps you won't even need one.

I was going to snag that one, but I saw your post claiming dibs Stu. Glad you got it. ;)

So I'm curious; are underdogette and I the only bitches in the FC dog pound? :lol:

<----- :myday:
 
OhTheAgony,

Muut

Well-Known Member
@Dave

Hi Dave, I have had a problem with my UD for the last 2 days. Indeed, it does not seem to heat up as effectively as it used to. I could barely get vapor yesterday whereas the unit itself was nice & warm. I think it comes from the power supply.. but I hope its not the device's connecter. In order to avoid to send my UD back, I brought this : http://www.amazon.de/gp/product/B001R5RCZ8/ref=oh_details_o02_s00_i00

Please tell me it's compatible^^ I respected the fact its 12V output, but I hope it's a standard connector when we deal with only 12v.

Thanks :wave:
 
Muut,

underdog

shade-tree vapor engineer
Manufacturer
@Dave

Hi Dave, I have had a problem with my UD for the last 2 days. Indeed, it does not seem to heat up as effectively as it used to. I could barely get vapor yesterday whereas the unit itself was nice & warm. I think it comes from the power supply.. but I hope its not the device's connecter. In order to avoid to send my UD back, I brought this : http://www.amazon.de/gp/product/B001R5RCZ8/ref=oh_details_o02_s00_i00

Please tell me it's compatible^^ I respected the fact its 12V output, but I hope it's a standard connector when we deal with only 12v.

Thanks :wave:

Hey Muut - sorry to hear of your problems, if the UD is warm but not vaping hot then it usually is the power supply. The one you linked to looks like it would work, I can't tell what size the tip connector is but the UD is designed for the most common: 2.1mm, though 2.5mm ones usually fit too. Hope it works for you!
 
underdog,

HighlyEducatedScholar

Student of Vapor
what should i do if i accidentally got essential oil on the wood around the heat port and possibly on the heat port itself?

i left the aromatherapy cup on my UD before heading to class and found the cup tipped over on top of it when i got back. im assuming one of my roommates accidentally bumped into it and ran away from the crime scene. it was a decent amount too i think, probably about a quarter full in the aromacup when it spilled.

for now im leaving it plugged in to hopefully 'burn off' any essential oil that is left. just not sure if there is anything else i should or shouldn't be doing.
 
HighlyEducatedScholar,

underdog

shade-tree vapor engineer
Manufacturer
what should i do if i accidentally got essential oil on the wood around the heat port and possibly on the heat port itself?

i left the aromatherapy cup on my UD before heading to class and found the cup tipped over on top of it when i got back. im assuming one of my roommates accidentally bumped into it and ran away from the crime scene. it was a decent amount too i think, probably about a quarter full in the aromacup when it spilled.

for now im leaving it plugged in to hopefully 'burn off' any essential oil that is left. just not sure if there is anything else i should or shouldn't be doing.

Hey HES - your best bet is to let it 'burn off' as you've already started doing.. I've done this a few times myself and it will eventually (for the most part) dissipate. Could take anywhere from a few hours to a few days or even more depending on the oil. On the bright side at least your Dog probably smells nice now.. :brow:
 
underdog,

HighlyEducatedScholar

Student of Vapor
Hey HES - your best bet is to let it 'burn off' as you've already started doing.. I've done this a few times myself and it will eventually (for the most part) dissipate. Could take anywhere from a few hours to a few days or even more depending on the oil. On the bright side at least your Dog probably smells nice now.. :brow:

ahhh alright thanks Dave. and yes my Dog smells very nice and lemony :lol: guess this almost works out in a way since i need to hit the books for a few more hours than usual and study for my finals. now i won't have my Dog teasing and distracting me out of the corner of my eye:dog:
 
HighlyEducatedScholar,
That's why I've never actually used any of my vapes for aromatherapy. I've had friends mess up other vapes that way. On a side note I've found I can use the little aroma cup on my electric stove on a really low setting.
 
SpaceKracker,

underdog

shade-tree vapor engineer
Manufacturer
Hey my Foggy Dogs.. what's up, why so quiet around here?

Been a busy day here, first shipping shipping shipping out the last of the orders put in for Abysmal plus a stack of international orders plus a couple other custom jobs. Pretty much caught up again! :cheers:

Still working on raising more cash for Abysmal through the end of the month both with the 25% from orders placed on his behalf and with the 2 Lost Dogs I have left that he'll get the full chunk of change from.

Lastly I have one more piece that I'm going to donate for him and this one I'm going to put on the Underdog Facebook page. This piece will be sold silent auction style with people messaging in 'bids', please DO NOT post your bid amount publicly. The winning amount will be announced at the end of the month. The minimum bid amount is $175.

Here is the piece in question:
Magic-Mush-1a.JPG


Magic-Mush-1b.JPG
 
I like it! You need to make a cream colored one with a blue ring on the stem and a brown base like it is growing in a cow pattie, for us southeastern shroom heads.
 

underdog

shade-tree vapor engineer
Manufacturer
I like it! You need to make a cream colored one with a blue ring on the stem and a brown base like it is growing in a cow pattie, for us southeastern shroom heads.

Thanks! Send me a picture of the kind you're talking about and maybe I'll try that next time.. :science:
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Hey Dave it reminds me of one of the first contest designs :) .
(Damn i have passed away without even remembering what i had for dinner , lol. Foggy dream must it been)
 
Abysmal Vapor,

underdog

shade-tree vapor engineer
Manufacturer
Hey Dave it reminds me of one of the first contest designs :) .
(Damn i have passed away without even remembering what i had for dinner , lol. Foggy dream must it been)

Haha yeah I guess its a similar color blue eh? I guess you can tell I like blues and purple colors.

Oh, hopefully you haven't passed away since that means dying.. :uhoh: zombie Abysmal isn't something I want to see. Passed out is the phrase for sleeping or fogging/drinking/etc yourself unconscious. :spliff:
 
underdog,
  • Like
Reactions: EyeFonez

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Thx for pointing that out to my Zombie English ,Dave ! Anyway if there are any zombies around i am sure they gonna enjoy the "Bloodwood zombie dog" lol :).
 
Abysmal Vapor,

sunsett70

Member
looks like the 'dog got no trouble walking with the cloud :lol: post #2157
http://www.fuckcombustion.com/threads/vapexhale-cloud.5247/page-87

if the 'dog hits 75% of my expectation, i'm gonna be satisfied man. waiting for my movingui twig & claro twig. i got sucked into adopting 2 'dogs. yeah, Dave was using his usual "emotional blackmail" technique when he released pics of them 'dogs laying around.

off topic, but if Abysmal was a zombie, and we forced fed him mj edibles & gas mask with mj vapor, do you think he'd chill or still wanna bite/eat us?
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
I'll give you a call if it ever happens to become a zombie if i ever pass away , i am signing to donor my undead body for the experiment.. :)
 
Abysmal Vapor,
  • Like
Reactions: darkrom

darkrom

Great Scott!
I want the mushroom vape so bad but I'm in the red as it is and I've already got 2 underdogs. Such an awesome piece!
 
darkrom,

okikir

Well-Known Member
Hey ya,

So, after some waiting I finally received my aqua vape.
I'll do a detailed report in a few days as it requests a more extensive use to clearly see how well it suits me, I just tested it for the first time 10 minuts ago and that was absolutely delicious (and I'm already flying :ko:) .

Here are some photo of this sweet couple (I apologize for the awful photo set-up):

o5W9g.jpg



mxoT2.jpg



MCQaS.jpg



8mLLD.jpg




Stay tuned :)
 

Muut

Well-Known Member
I'm pissed! I just bought the black leaf nautilus yesterday, because I wasn't able to find such a thing as the aquavape. Please give a feedback when you have tested it :)! Maybe a little video of your piece in action ?? that would be awsome.. Anyways, this piece looks very nice and gives even more serious pros to the UD!
 
Muut,
Top Bottom